166 lines
7.2 KiB
Markdown
166 lines
7.2 KiB
Markdown
# Digi Embedded Yocto (DEY) 3.0
|
|
## Release 3.0-r2
|
|
|
|
This document provides information about Digi Embedded Yocto,
|
|
Digi International's professional embedded Yocto development environment.
|
|
|
|
Digi Embedded Yocto 3.0 is based on the Yocto Project(TM) 3.0 (Zeus) release.
|
|
|
|
For a full list of supported features and interfaces please refer to the
|
|
online documentation.
|
|
|
|
# Tested OS versions
|
|
|
|
The current release has been verified and tested with the following
|
|
OS versions:
|
|
|
|
* Ubuntu 18.04
|
|
|
|
# Supported Platforms
|
|
|
|
Software for the following hardware platforms is in production support:
|
|
|
|
## ConnectCore 8M Nano
|
|
* ConnectCore 8M Nano System-on-Module (SOM)
|
|
* [CC-WMX-FS7D-NN](https://www.digi.com/cc8mnano)
|
|
* ConnectCore 8M Nano Development Kit
|
|
* [CC-WMX8MN-KIT](https://www.digi.com/products/models/cc-wmx8mn-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.0/cc8mnano/yocto-gs_index))
|
|
|
|
## ConnectCore 8X
|
|
* ConnectCore 8X System-on-Module (SOM)
|
|
* [CC-WMX-JM8E-NN](https://www.digi.com/products/models/cc-wmx-jm8e-nn)
|
|
* [CC-MX-JM8D-ZN](https://www.digi.com/products/models/cc-mx-jm8d-zn)
|
|
* [CC-MX-JM7D-ZN](https://www.digi.com/cc8x)
|
|
* [CC-WMX-JM7D-NN](https://www.digi.com/products/models/cc-wmx-jm7d-nn)
|
|
* [CC-MX-JQ6D-ZN](https://www.digi.com/cc8x)
|
|
* [CC-MX-JQ7D-ZN](https://www.digi.com/cc8x)
|
|
* [CC-WMX-JQ7D-ZN](https://www.digi.com/cc8x)
|
|
* ConnectCore 8X SBC Pro
|
|
* [CC-WMX8-PRO](https://www.digi.com/products/embedded-systems/single-board-computers/digi-connectcore-8x-sbc-pro) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.0/cc8x/yocto-gs_index))
|
|
|
|
## ConnectCore 6UL
|
|
* ConnectCore 6UL System-on-Module (SOM)
|
|
* [CC-WMX-JN58-NE](https://www.digi.com/products/models/cc-wmx-jn58-ne)
|
|
* [CC-MX-JN58-Z1](https://www.digi.com/products/models/cc-mx-jn58-z1)
|
|
* CC-WMX-JN7A-NE
|
|
* [CC-WMX-JN7A-CBX](https://www.digi.com/products/models/cc-wmx-jn7a-cbx)
|
|
* [CC-WMX-JN68-NN](https://www.digi.com/products/models/cc-wmx-jn68-nn)
|
|
* [CC-WMX-JN69-NN](https://www.digi.com/products/models/cc-wmx-jn69-nn)
|
|
* [CC-MX-JN69-ZN](hhtps://www.digi.com/products/models/cc-mx-jn69-zn)
|
|
* ConnectCore 6UL SBC Express
|
|
* [CC-WMX6UL-START](https://www.digi.com/products/models/cc-wmx6ul-start) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.0/cc6ul/yocto-gs_index))
|
|
* [CC-SBE-WMX-JN58](https://www.digi.com/products/models/cc-sbe-wmx-jn58)
|
|
* ConnectCore 6UL SBC Pro
|
|
* [CC-WMX6UL-KIT](https://www.digi.com/products/models/cc-wmx6ul-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/embedded/dey/3.0/cc6ul/yocto-gs_index))
|
|
* [CC-SBP-WMX-JN58](https://www.digi.com/products/models/cc-sbp-wmx-jn58)
|
|
|
|
Previous versions of Digi Embedded Yocto include support for additional Digi
|
|
hardware.
|
|
|
|
# Installation
|
|
|
|
Digi Embedded Yocto is composed of a set of different Yocto layers that work in
|
|
parallel. The layers are specified on a [manifest](https://github.com/digi-embedded/dey-manifest/blob/zeus/default.xml) file.
|
|
|
|
To install, please follow the instructions at the dey-manifest [README](https://github.com/digi-embedded/dey-manifest)
|
|
|
|
# Documentation
|
|
|
|
Documentation is available online at https://www.digi.com/resources/documentation/digidocs/embedded/
|
|
|
|
# Downloads
|
|
|
|
* Demo images: https://ftp1.digi.com/support/digiembeddedyocto/3.0/r1/images/
|
|
* Software Development Kit (SDK): https://ftp1.digi.com/support/digiembeddedyocto/3.0/r1/sdk/
|
|
|
|
# Release Changelog
|
|
|
|
## 3.0-r1
|
|
|
|
* Release based on [Yocto 3.0 (Zeus)](https://www.yoctoproject.org/software-overview/downloads) including:
|
|
* New toolchain based on GLIBC-2.30
|
|
* Updated Qt 5.13.2
|
|
* Updated NetworkManager to v1.18.4
|
|
* Updated Wpa-supplicant to v2.9
|
|
* Updated gstreamer1.0 to v1.16.0
|
|
* Updated busybox to v1.31.0
|
|
* Removed support to bluez4
|
|
* Updated OpenSSL to v1.1.1d
|
|
* Package upgrades and security fixes
|
|
* Updated kernel version to v5.4 for i.MX8X, i.MX8MN and i.MX6UL platforms
|
|
* Updated U-Boot to version 2017.03-r6 for i.MX6UL platform
|
|
* Updated U-Boot to version 2018.03-r4 for i.MX8MN platform
|
|
* Updated U-Boot to version 2019.04-r2 for i.MX8X platform
|
|
* Added support for ConnectCore 8M Nano v2 SOM
|
|
* Added initial TrustFence support for ConnectCore 8M Nano
|
|
|
|
# Known Issues and Limitations
|
|
|
|
This is a list of known issues and limitations at the time of release. An
|
|
updated list can be found on the online documentation.
|
|
|
|
* Firmware update
|
|
* The software update package must be located in the root level of the
|
|
update media (subfolders are not yet supported).
|
|
* Cloud Connector
|
|
* Remote file system management fails with long file names and paths
|
|
(over 255 characters).
|
|
* Wireless
|
|
* Performance of the wireless interface is reduced when using concurrent mode,
|
|
as the wireless interface is shared between several different
|
|
functionalities.
|
|
* When using wireless concurrent mode, Digi recommends you keep the different
|
|
modes on the same frequency channels. For example, when configuring access
|
|
point mode on channel 36 in the 5GHz band, connect to the same channel both
|
|
in station mode and Wi-Fi direct so that the radio performance is optimized.
|
|
* When working as an access point, DFS-capable channels in the 5GHz band are
|
|
not supported.
|
|
* For P2P connections Digi recommends "Negotiated GO" modes. The QCA6564
|
|
devices (ConnectCore 6UL and ConnectCore 8M Nano) fail to join autonomous
|
|
groups.
|
|
* Trustfence is not yet supported on the ConnectCore 8M Nano.
|
|
|
|
## ConnectCore 8M Nano
|
|
|
|
* ConnectCore 8M Nano System-on-Module (SOM)
|
|
* CPU wake-up sources are not yet supported
|
|
* ConnectCore 8M Nano DVK
|
|
* The maximum bitrate for CAN interface is 125 Kbits/s. This is a software
|
|
limitation from the CAN controller.
|
|
|
|
## ConnectCore 8X
|
|
|
|
* i.MX8QXP Processor
|
|
* GPU maximum performance reduced. The maximum frequency targets are 850 MHz
|
|
for the shaders and 700 MHz for the core. However, in this hardware release
|
|
the maximum frequency is limited to 650 MHz for the shaders and 600 MHz for
|
|
the core, with the corresponding performance reduction. These targets will
|
|
be met in future releases of the hardware.
|
|
* BSDL operation is not supported. It will be available in future releases
|
|
of the hardware.
|
|
|
|
## ConnectCore 6UL
|
|
|
|
* ConnectCore 6UL System-on-Module (SOM)
|
|
* The UART connected to the Bluetooth chip on early versions of the ConnectCore
|
|
6UL system-on-module (hardware version < 4) cannot properly execute flow
|
|
control. To work around this issue, UART1 of these SOM versions has been
|
|
configured to operate at 115200 bps and without hardware flow control,
|
|
reducing the maximum throughput of this interface.
|
|
* The QCA6564 wireless chip does not support Wake On Wireless LAN.
|
|
|
|
# Support Contact Information
|
|
|
|
For support questions please contact Digi Technical Support:
|
|
|
|
* [Enterprise Support](https://mydigi.secure.force.com/customers/)
|
|
* [Product Technical Support](https://www.digi.com/support#support-tools)
|
|
* [Support forum](https://www.digi.com/support/forum/)
|
|
|
|
When you contact Digi Technical Support, include important system details and
|
|
device information to help Digi resolve the issue more quickly.
|
|
|
|
1. In the device, run the command 'sysinfo'. This generates the following file:
|
|
/tmp/<current timestamp>.txt.gz.
|
|
2. Attach the <current timestamp>.txt.gz file to your support ticket.
|