183 lines
8.0 KiB
Markdown
183 lines
8.0 KiB
Markdown
# Digi Embedded Yocto (DEY) 2.2
|
|
## Release 2.2-r3
|
|
|
|
This document provides information about Digi Embedded Yocto,
|
|
Digi International's professional embedded Yocto development environment.
|
|
|
|
Digi Embedded Yocto 2.2 is based on the 2.2 (Morty) Yocto release.
|
|
|
|
For a full list of supported features and interfaces please refer to the
|
|
online documentation.
|
|
|
|
# Supported Platforms
|
|
|
|
The current release supports the following hardware platforms:
|
|
|
|
Software for the following hardware platforms is in production support:
|
|
|
|
* Digi ConnectCore 6UL
|
|
* [Digi P/N CC-WMX-JN58-NE](http://www.digi.com/products/models/cc-wmx-jn58-ne)
|
|
* [Digi P/N CC-MX-JN58-Z1](https://www.digi.com/products/models/cc-mx-jn58-z1)
|
|
* Digi P/N CC-WMX-JN7A-NE
|
|
* Digi ConnectCore 6UL SBC Express
|
|
* [Digi P/N CC-WMX6UL-START](http://www.digi.com/products/models/cc-wmx6ul-start) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001548/default.htm#concept/yocto/c_get_started_with_yocto.htm))
|
|
* Digi ConnectCore 6UL SBC Pro
|
|
* [Digi P/N CC-WMX6UL-KIT](https://www.digi.com/products/models/cc-wmx6ul-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001547/default.htm#concept/yocto/c_get_started_with_yocto.htm))
|
|
|
|
* Digi ConnectCore 6
|
|
* [Digi P/N CC-WMX-J97C-TN](http://www.digi.com/products/models/cc-wmx-j97c-tn)
|
|
* [Digi P/N CC-WMX-L96C-TE](http://www.digi.com/products/models/cc-wmx-l96c-te)
|
|
* [Digi P/N CC-WMX-L87C-TE](http://www.digi.com/products/models/cc-wmx-l87c-te)
|
|
* [Digi P/N CC-MX-L76C-Z1](http://www.digi.com/products/models/cc-mx-l76c-z1)
|
|
* [Digi P/N CC-MX-L86C-Z1](http://www.digi.com/products/models/cc-mx-l86c-z1)
|
|
* [Digi P/N CC-MX-L96C-Z1](http://www.digi.com/products/models/cc-mx-l96c-z1)
|
|
* [Digi P/N CC-WMX-L76C-TE](http://www.digi.com/products/models/cc-wmx-l76c-te)
|
|
* Digi P/N CC-WMX-K87C-FJA
|
|
* Digi P/N CC-WMX-K77C-TE
|
|
* Digi P/N CC-WMX-L97D-TN
|
|
* Digi P/N CC-WMX-J98C-FJA
|
|
* Digi P/N CC-WMX-J98C-FJA-1
|
|
|
|
* Digi ConnectCore 6 Development Kit
|
|
* [Digi P/N CC-WMX6-KIT](http://www.digi.com/products/models/cc-wmx6-kit) ([Get Started](https://www.digi.com/resources/documentation/digidocs/90001546/default.htm#concept/yocto/c_get_started_with_yocto.htm))
|
|
|
|
* Digi ConnectCore 6 SBC
|
|
* [Digi P/N CC-SB-WMX-J97C-1](http://www.digi.com/products/models/cc-sb-wmx-j97c-1)
|
|
* [Digi P/N CC-SB-WMX-L87C-1](https://www.digi.com/products/models/cc-sb-wmx-l87c-1)
|
|
* [Digi P/N CC-SB-WMX-L76C-1](https://www.digi.com/products/models/cc-sb-wmx-l76c-1)
|
|
|
|
Previous versions of Digi Embedded Yocto include support for additional Digi
|
|
hardware.
|
|
|
|
# Documentation
|
|
|
|
Documentation is available online on the Digi documentation site:
|
|
|
|
* [Digi ConnectCore 6UL SBC Express](https://www.digi.com/resources/documentation/digidocs/90001548/default.htm)
|
|
* [Digi ConnectCore 6UL SBC Pro](https://www.digi.com/resources/documentation/digidocs/90001547/default.htm)
|
|
* [Digi ConnectCore 6 Jumpstart Development Kit](https://www.digi.com/resources/documentation/digidocs/90001546/default.htm)
|
|
|
|
# Downloads
|
|
|
|
* Demo images: ftp://ftp1.digi.com/support/digiembeddedyocto/2.2/r2/images/
|
|
* Software Development Kit (SDK): ftp://ftp1.digi.com/support/digiembeddedyocto/2.2/r2/sdk/
|
|
|
|
# Release Changelog
|
|
|
|
## 2.2-r3
|
|
|
|
* TBC
|
|
|
|
## 2.2-r2
|
|
|
|
* Use NetworkManager for ethernet, wireless (station) and cellular network interfaces
|
|
* Updated kernel version to v4.1.41 for CC6 platform
|
|
* Added support for SPI Slave mode on CC6UL platform
|
|
* Added support for Atmel Cryptochip ATEC508A using Cryptoauthlib
|
|
* Network failover mechanism
|
|
* Powered by AWS certified on all supported hardware platforms including:
|
|
* AWS GreenGrass core software
|
|
* AWS IoT Device SDK for embedded C
|
|
* Updated AR6233 firmware for Radio Equipment Directive module certification
|
|
* QCA6564 WorldWide board data file available on request
|
|
* Includes MCA firmware v1.0:
|
|
* MCA analog tamper detection
|
|
* MCA ADC-based analog comparators
|
|
* Updated U-Boot to version 2015.04-r9
|
|
* Added support for CC6UL variant 0x4
|
|
* Added dynamic environment location and bad block handling for the environment
|
|
* TrustFence:
|
|
* Move RootFS encryption key to 'safe' partition
|
|
* Added support for four tamper interfaces
|
|
* Disable external memory boot in OTP for secure boot
|
|
* Skip initial scanning of bad blocks for faster boot on NAND
|
|
* Updated documentation
|
|
|
|
## 2.2-r1
|
|
|
|
* Release based on [Yocto 2.2 (Morty)](https://www.yoctoproject.org/downloads/core/morty22) including:
|
|
* New toolchain based on GCC-6.2.0 and GLIBC-2.24
|
|
* Updated Qt 5.7
|
|
* Updated ModemManager with validated support for:
|
|
* Digi's XBee Cellular LTE Cat 1 (USA/Verizon), with P/N XBC-V1-UT-001
|
|
* Digi's XBee Cellular 3G Global, with P/N XBC-M5-UT-001
|
|
* U-Blox's TOBY L-200/L-210
|
|
* Telit's LE910 and HE910
|
|
* Huawei's ME909u
|
|
* Quectel's EC21 and EC25
|
|
* Modified default networking settings:
|
|
* Defalt to dynamic IP addresses assignments
|
|
* Default station and softAP concurrent wireless mode
|
|
* TrustFence enabled
|
|
* Remote manager
|
|
* Local and remote manager firmware update
|
|
* Package upgrades and security fixes
|
|
* U-boot support for 1GB DDR3 RAM on CC6UL
|
|
|
|
# Known Issues and Limitations
|
|
|
|
This is a list of known issues and limitations at the time of release. An
|
|
updated list can be found on the online documentation.
|
|
|
|
* If TrustFence (TM) image encryption support is enabled, the uSD image will
|
|
boot a signed U-Boot only.
|
|
* Firmware update
|
|
* The software update package must be located in the root level of the
|
|
update media (subfolders are not yet supported).
|
|
* Cloud Connector
|
|
* Remote file system management fails with long file names and paths
|
|
(over 255 characters).
|
|
|
|
## Digi ConnectCore 6UL
|
|
|
|
* The UART connected to the Bluetooth chip on early versions of the ConnectCore
|
|
6UL system-on-module (hardware version < 4) cannot properly execute flow
|
|
control. To work around this issue, UART1 of these SOM versions has been
|
|
configured to operate at 115200 bps and without hardware flow control,
|
|
reducing the maximum throughput of this interface.
|
|
* When using wireless concurrent mode as the wireless interface is shared
|
|
between several different functionalities performance is reduced.
|
|
* When using wireless concurrent mode Digi recommends to keep the different
|
|
modes on the same frequency channels. For example, when configuring access
|
|
point mode on channel 36 on band A, the recommendation would be to connect
|
|
to the same channel both in station mode and WiFi direct so that the radio
|
|
performance is optimized
|
|
* When working as an access point, DFS capable channels in band A are not
|
|
currently supported.
|
|
* The QCA6564 wireless chip does not support Wake On Wireless LAN
|
|
|
|
## Digi ConnectCore 6
|
|
|
|
* NXP i.MX6 processor has a documented errata (ERR004512) whereby the maximum
|
|
performance of the Gigabit FEC is limited to 400Mbps (total for Tx and Rx)
|
|
* When using softAP mode on Band A on the Qualcomm AR6233, channels used for
|
|
Dynamic Frequency Selection (DFS) are not supported
|
|
* The Qualcomm AR6233 firmware does not support the following configuration
|
|
modes:
|
|
* Concurrent modes involving P2P mode, such as P2P + softAP or P2P + STA
|
|
* Bluetooth + softAP + STA concurrent mode
|
|
* A maximum of five clients are supported when using Qualcomm's AR6233 in
|
|
softAP mode
|
|
* A maximum of ten connected devices are supported when using Qualcomm's AR6233
|
|
Bluetooth Low Energy mode
|
|
|
|
## Digi ConnectCore 6 SBC
|
|
|
|
* The Micrel PHY KSZ9031 may take between five and six seconds to
|
|
auto-negotiate with Gigabit switches
|
|
|
|
# Support Contact Information
|
|
|
|
For support questions please contact Digi Technical Support:
|
|
|
|
* [Enterprise Support](https://mydigi.secure.force.com/customers/)
|
|
* [Product Technical Support](http://www.digi.com/support/product-support)
|
|
* [Support forum](http://www.digi.com/support/forum/)
|
|
|
|
When you contact Digi Technical Support, include important system details and
|
|
device information to help Digi resolve the issue more quickly.
|
|
|
|
1. In the device, run the command 'sysinfo'. This generates the following file:
|
|
/tmp/<current timestamp>.txt.gz.
|
|
2. Attach the <current timestamp>.txt.gz file to your support ticket.
|