Commit 619ca8b2a8 changed the ccimx6ul's default endpoint URL and client cert
path in order to prevent performance issues if the client cert is erased before
registering the device.
In reality, the client cert path doesn't really matter after this change since
the remotemanager.digi.com endpoint won't make use of it, and we now ensure
that /mnt/data is writable; so we might as well keep using that path.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
If a target's DRM certificate is lost/erased before registering said target,
the CCCS server will reject all connection attempts from the target. This
can happen during development, as our installer scripts format the data
partition where the certificate is stored by default (see commit c17af3fd47).
Since the ccimx6ul uses sysvinit, we respawn the cccsd daemon via inittab if
process ends unexpectedly (see commit b154154a7e). When the server always
rejects connections due to a missing certificate, the cccsd daemon is
constantly respawning and terminating prematurely. Said daemon is very
CPU-intensive during initialization, so this causes the overall system's
performance to be hindered.
For now, to avoid this situation, use the CCCS endpoint that doesn't require
a certificate in order to ensure stable connections even if the data partition
gets formatted.
https://onedigi.atlassian.net/browse/DEL-9892https://onedigi.atlassian.net/browse/DEL-9894
This reverts commit 4f8ed2d434.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Add a check to avoid disabling read-only protection on partitions that don't
support it, and refine logging to print the specific bootloader partition being
flashed (instead of the generic "U-Boot" label).
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Do not append the encryption key to the bootloader on STM platforms, it’s not
required and triggers an installation error.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Replace the standalone connectcore-demo-example-webkit recipe with
a bbappend extending the main demo recipe. This is in preparation for
adding support for chromium-based connectcore demo.
While on it, merge the .inc file into the main recipe as there is only a
consumer of that inc file. Also minor cosmetic fixes to make the recipe
more Yoct-ish.
https://onedigi.atlassian.net/browse/DEL-9838
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The ccimx95 does not share most of the configuration with the ccimx91/93,
so use a specific configuration file.
At the moment only the GPIO's configuration is updated for the ccimx95
(user LEDs and BUTTONs).
https://onedigi.atlassian.net/browse/DEL-9809
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use ${servicedir} instead of hardcoded /srv, disable unnecessary
configure/compile steps and reorder the recipe according to Yocto coding
style.
No functional change.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
While on it, remove the third argument to write_artifact_emmc function,
as write access is always needed to write in U-Boot partitions, otherwise
they would be 'ro' protected.
https://onedigi.atlassian.net/browse/DEL-9735
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
(cherry picked from commit 5001419caf)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
While on it, remove the third argument to write_artifact_emmc function,
as write access is always needed to write in U-Boot partitions, otherwise
they would be 'ro' protected.
https://onedigi.atlassian.net/browse/DEL-9735
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Until DEY 5.0, the ccimx6ul platform was the only one that did not include a
`data` partition.
As a result, `cccsd` had to store the client certificate from Remote Manager in
the root filesystem, under `/etc/ssl/certs` by default.
This setup caused issues after a software update, as the received client
certificate would be lost, making the device unable to reconnect to the server
until the certificate was manually reset from Remote Manager.
The same problem occurred in dual-boot systems, since the certificate was stored
in the rootfs of the current bank and was not accessible from the other bank.
To avoid this situation, the ccimx6ul used the `remotemanager.digi.com` endpoint
instead of `edp12.devicecloud.com`, as the former does not support or deliver
client certificates.
Now that DEY 5.0 includes a `data` partition in the ccimx6ul partition table, we
can remove this exception and allow the use of `edp12.devicecloud.com`, storing
the certificates persistently in the `data` partition.
Signed-off-by: Tatiana Leon <Tatiana.Leon@digi.com>
add a new recipe to include nxp prebuilt binaries for:
* mlanutl: WoWLAN support
* nanapp: NAN support
* nmlawls: monitor Wi-Fi events
Included prebuilt version obtained from next release:
SD-WLAN-UART-BT-SPI-OT-Zigbee-DualPAN-IW612-LNX_6_12_3-IMX8-18.99.3.p23.20-18.99.3.p23.20-MM6X18505.p23-GPL.zip
https://onedigi.atlassian.net/browse/DEL-8462
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Some of our example recipes that are meant to be used on specific platform
subsets are available to be built/installed for all platforms. Even though it's
possible to build/install these recipes for platforms they aren't meant for,
we should restrict them to their intended platforms:
* dey-examples-btconfig: this is only meant for ccimx6 platforms that use
the Atheros wifi/bt chip, so reflect this in the recipe and in the
examples packagegroup.
* dey-examples-tamper: this is only meant for platforms with MCA (ccimx6ul,
ccimx8x and ccimx8m). This requirement was already set in the examples
packagegroup, but the recipe was available to any platform.
https://onedigi.atlassian.net/browse/DEL-9612
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Commit 15f9aeba0e removed the dey-examples-v4l2
recipe, yet we still kept it as a dependency for ccimx6 platforms. Remove this
impossible dependency to be able to build the examples packagegroup for ccimx6
platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Like we do for our other supported images, provide a recipe to generate a SWU
package based on dey-image-flutter
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
There are several recipes in meta-digi related to features that we haven't
tested in a long time and don't appear in the DEY 5.0 documentation. Remove
them to avoid unexpected behavior.
Said features are:
* Coral TPU support (only supported in DEY 3.2)
* AWS support (removed from default images and docs in DEY 4.0)
* dey-image-tiny (hasn't been maintained since DEY 2.0)
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Refactored some functions to make them more generic, allowing for
greater parameter reusability.
https://onedigi.atlassian.net/browse/DEL-9526
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Due to a change in systemd the default home directory is now "/root".
Modify our recipes to match with this change.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Device tree overlays now have the extension 'dtso' that
distinguishes them from board 'dts' files, so there is
no need for a prefix '_ov_' to tell if a file contains
a DT overlay.
To make them shorter and easier to tell the platform they
are for, change the filename format to:
<platform-name>_<functionality>.dtso
where <platform-name> can be the name of the SOM or the
name of the DVK, so there is no need either to specify
'som' or 'board' on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
bootcount utility started by bootcount-init script was inconditionally setting
bootcount to 0 even if the functionality is disabled.
According to documentation, bootcount functionality is only enabled if bootlimit
variable is defined to a value greater than 0 in U-Boot environment.
In platforms like cc6ul, that use MCA NVRAM to store bootcount, this was corrupting
user NVRAM.
Version increased to 1.1.
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
We haven't included fbtest in our default images for a long time. Also, its
lone dependency, microwindows, is broken due to an outdated SRC_URI that no
longer exists. Remove both recipes
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since the ConnectCore demo server forks execution to start the demo server
Python script, it may not be fully initialized when the ConnectCore demo
example initializes the UI and attempts to retrieve information from the server
daemon. This commit introduces a delay to ensure the server is ready before
another service, such as the ConnectCore demo example, interacts with it.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
robin
Hector Palacios
Javier Viguera
Arturo Buzarra
Gabriel Valcazar
Gonzalo Ruiz
Isaac Hermida
Tatiana Leon
Francisco Gil
Hector Bujanda