cryptoauth-openssl-engine is not compatible with OpenSSL v1.1.x, until
it will be supported, we disable it.
https://jira.digi.com/browse/DEL-6412
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The SDMA firmware does no longer live inside the kernel tree.
It must now be installed on the rootfs.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6420
Just add the following to the conf/local.conf file:
MACHINEOVERRIDES .= ":use-mainline-bsp"
The defconfig is the mainline imx_v6_v7_defconfig.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Since we were modifying UBOOT_SYMLINK for the ccimx8x, we were generating
u-boot symlinks with imx-boot names. This also caused the imx-boot recipe to
fail during compilation, because it couldn't find the old UBOOT_SYMLINK that
we replaced.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some overrides that were missing (imxgpu, imxdpublit) are needed for certain
packages to build.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package includes applications to:
- Update the MCA firmware
- Manage different MCA settings
- Configure the tamper settings
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.
The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:
* Support for our platform (based on the mx8qxpa0, which uses A0-specific
parameters for mkimage and appends the DCD explicitly)
* Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
string per platform; so the compile, install and deploy functions had to
be tweaked to build both 1GB and 2GB variants for our platform).
Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
U-Boot's 'dboot' command now supports uncompressing Image.gz.
This will be the default kernel image type for the CC8X.
This also changes the names of the device tree artifacts, that must be
updated on the boot script. While on it, add support for all the SOM
variants (wireless and non-wireless).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- This is an AARCH64 platform that requires to build "Image", so let's
change KERNEL_IMAGETYPE to a weak assignment in imx-digi-base.inc
- The device tree is inside a vendor folder.
- For the moment, this platform builds from a different branch.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
With this patch a user can provide his own kernel 'defconfig' file by:
- setting the variable KERNEL_DEFCONFIG to a custom kernel configuration
file inside the kernel repository.
- setting the variable KERNEL_DEFCONFIG to a kernel configuration file
using the full path to the file.
- clearing the variable KERNEL_DEFCONFIG and providing a kernel
configuration file in the layer (in this case the file must be named
'defconfig').
Otherwise the default platform's kernel configuration file will be taken
directly from the Linux source code tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This adds support for U-Boot v2017.03 for all platforms (including CC8X).
For legacy v2015.04:
- Renames u-boot.inc as a versioned file only for v2015.04.
- Moves boot/install scripts from versioned folder into non-versioned
folder (since the scripts remain the same between versions).
For new v2017.03:
- Re-uses poky's u-boot.inc in rocko for v2017.03
- DEY recipe re-writes the do_compile for special U-Boot configuration
required for TrustFence.
- DEY recipe appends the do_deploy, for U-Boot scripts and deploy of
special TrustFence artifacts.
- Adds u-boot-dtb.xxx to UBOOT_CONFIG, required for new U-Boots.
- Adds CC8X scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
Add initial support for Digi ConnectCore 8X SBC Express.
- ccimx6qp was used as reference machine from meta-digi.
- imx8qxpmek was used as a reference machine from meta-fsl-bsp-release.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
As a side effect, remove U-Boot entry point variable and LOADADDR
extra parameter from the kernel recipe.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5554
U-Boot has been able to boot kernel zImage for a long time so make this
the default kernel image.
For the CC6 we still want to use uImage for compatibility reasons.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5237
Add initial support for Digi's ConnectCore 6 QuadPlus SBC.
The ccimx6qp platform has the QCA6564 chip instead of the
other Atheros chips and included the Atmel ECC508A cryptographic
chip.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The current value only allows partitions of up to 8 MiB, which is not
enough for the 0x04 variant (which uses a linux partition of 24 MiB by
default).
This new value allows for up to 32 MiB (assuming 128 KiB erase block size).
Also add comments explaining the -c value and maximum partition sizes
supported.
https://jira.digi.com/browse/DEL-4971
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
After the 'ccardimx28js' platform removal, these variables and machine
features are not used anymore, so remove them.
https://jira.digi.com/browse/DEL-4771
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is required to be able to use the whole RootFS partition which is
512 MiB in the 0x04 CC6UL SOM variant.
The old value only allowed to manage partitions of up to 256 MiB, this new
value allows for up to 1 GiB (assuming 128 KiB erase block size).
https://jira.digi.com/browse/DEL-4567
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This library adds support to use the Atmel CryptoAuth device available
in the ConnectCore 6UL.
https://jira.digi.com/browse/DEL-4284
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The main purpose is to improve our kits usability. This way users do not need
to follow the steps in the documentation to change from static to DHCP IPs.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit adds the wireless concurrent mode as a default
configuration to the CC6UL machine.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3818
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The i.MX6UL supports some basic multimedia functionality
using the pixel pipeline (PXP).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2358
This application can be used to:
- Update the MCA firmware
- Configure the tamper settings
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3230
This commit adds the proper DEFAULTTUNE and overrides for the ccimx6ul
family of modules.
https://jira.digi.com/browse/DEL-3102
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This reverts commit b8f50680e5.
The support to read and write to an encrypted environment has been added, so
there is no need to exclude the u-boot-fw-utils anymore.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
APM is an ancient power management API mainly for x86. There is an
optional emulation layer for ARM, but none of our platforms is using
it, so just remove the machine feature.
https://jira.digi.com/browse/DEL-2745
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
enabled
There is currently no support on fw_printenv/fw_setenv to access an
encrypted environment.
This commit removes the package if U-Boot environment encryption is
enabled to avoid environment corruption on access.
It also documents the issue as a known issue.
https://jira.digi.com/browse/DEL-2625
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
U-Boot environment on the CC6UL NAND is located at partition /dev/mtd1:
- original copy is located at offset 0 in the partition
- redundant copy is located 1 erase block (128K) after the original copy
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2552
The size of the destination partition (linux) is around 14MiB so the
max-leb-cnt must be reduced compared to the one used for the rootfs
partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2697
This commit will add the cryptodev module to the CC6UL kernel to use
the CAAM from user space through this device.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2719
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This daemon (rngd) feeds random data from hardware device to kernel
entropy pool.
https://jira.digi.com/browse/DEL-2501
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This module is the interface between user-space (openssl, gnutls) and
the hardware cryptographic acceleration support (CAAM).
This commit installs the module in the rootfs and configures it so it is
loaded on boot.
https://jira.digi.com/browse/DEL-2501
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These tools are part of the official FSL gst1.0 plugin. Add then to the
MACHINE_GSTREAMER_1_0_PLUGIN variable so they get added to the rootfs.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove QT4 phonon patches and qtmediaplayer demo as they depend on
gstreamer-0.10.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 2.0
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Split the ATH6KL firmware files to a different recipe and package so
they can be used regardless of what driver we are using (the external
module or the upstream driver).
Reuse the 'firmware-atheros' recipe which was creating a package with
bluetooth firmware, to create the package with wireless firmware as
well.
Also remove 'ccimx6' as compatible machine for the external atheros
module, as the module does not even compile with the kernel version we
are using (3.14).
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Which wireless module to use belongs more to the machine config files in
the BSP layer, than to the generic wireless packagegroup.
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 1.8
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one u-boot supported for each platform, so there is no
need to explicitly set the u-boot preferred version.
As a result it was needed to rework the nvram recipe which was using the
removed PREFERRED_VERSION_u-boot-dey variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one kernel supported for each platform, so there is no
need to explicitly set the kernel preferred version.
Also:
* Remove IS_KERNEL_2X variable which is no longer needed.
* Simplify jenkins build script, now that we do not need to build two
kernel versions for ccardimx28.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of creating a new recipe for u-boot fw-utils (fw_printenv) just
bbappend the recipe in Poky.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Merge u-boot-dey-rev_2015.04.inc into the recipe. There is no need to
split the recipe, as there is no other recipe using this u-boot code.
* Update uboot configurations to the new format '_defconfig'. Also add
the new 2GB variant.
* Remove PREFERRED_VERSION_u-boot-dey for CC6, as there is only one
version available for this platform.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Linux 3.10 is still available via project's local.conf.
PREFERRED_VERSION_linux-dey = "3.10"
KERNEL_DEVICETREE = "..."
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Platform defconfig corresponds to sha1 'e1506ff' in the kernel.
At this point linux-3.10 continues to be the default, some device-tree
files were renamed and the external atheros module does not compile with
linux-3.14, so to use this kernel with dey-1.8, following lines are
needed in the project's local.conf:
PREFERRED_VERSION_linux-dey = "3.14"
KERNEL_DEVICETREE = " \
imx6dl-ccimx6sbc-wb.dtb \
imx6dl-ccimx6sbc-w.dtb \
imx6q-ccimx6sbc.dtb \
imx6q-ccimx6sbc-wb.dtb \
imx6q-ccimx6sbc-wb-ldo-bypass.dtb \
imx6q-ccimx6sbc-w.dtb \
"
MACHINE_FEATURES_remove = "wifi"
https://jira.digi.com/browse/DEL-1748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The 'resize2fs' command we use to resize the filesystem on first boot
has been moved from standard 'e2fsprogs' package to its own
'e2fsprogs-resize2fs', so this is the one we need to include now.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use Yocto's UBOOT_CONFIG new functionality to select the u-boot
configuration to build.
https://jira.digi.com/browse/DEL-1584
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Remove the current DEY variants support and framework for CC6 because in
following commits we will add support for all *hardware* variants in
just one set of DEY images for CC6.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The IMAGE_FSTYPES variable for ccimx51js and ccimx53js was not correct,
it was taking the default one from Poky (IMAGE_FSTYPES="tar.gz")
instead of the one in 'imx-digi-base.inc' file. This happened because we
were using the weak '??=' assignement while the default in Poky was
using '?='.
Also rework a bit how this variable is set, so it is easily overriden on
project config files or initramfs recipes.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove support for device tree variants as it's not needed. We will
only have different device tree for the different CPUs, but not for the
different variants of the same CPU.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 1.8
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Variant 0x8 does not have wireless/bluetooth, but it uses the same
device tree than the other variants.
https://jira.digi.com/browse/DEL-1524
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3ba5bff51ebbe6be8325128ae3beb950993607d2)
Variant 0x5 (Furuno) does not have bluetooth, but the device tree in the
kernel is the same than the variant with bluetooth.
https://jira.digi.com/browse/DEL-1524
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 7de11f08e95fecb8d4895556292a488a91af6817)
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 015d029255eb407cca4c986562a304aef7de3940)
Kernel 3.10 does not fail to build perf features (as kernel 2.6.35
does), so there is no need to disable them for platforms using that
kernel version.
https://jira.digi.com/browse/DEL-1418
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
In Yocto 1.7 meta-fsl-arm replaced udev-extraconf bbappend with a new
package (udev-rules-imx). So we need to adapt our own bbappend to these
changes so all the needed udev rules are in place.
https://jira.digi.com/browse/DEL-1336
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We inherited from DEL the requirement to build more than one flash image
for the same rootfs contents depending on the EBS of the flash chip.
Yocto does not have support to generate more than one flash image so we
had to create functions in the image_types_digi bbclass to provide this
feature.
This commit removes that functionality and uses the standard yocto
support to generate ubifs and jffs2 flash images. The way to customize
the flash parameters is via EXTRA_IMAGECMD_jffs2 and MKUBIFS_ARGS
variables. In our case those variables are already set depending on the
different hardware variants.
https://jira.digi.com/browse/DEL-232
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Arturo Buzarra
Hector Palacios
Alex Gonzalez
Gabriel Valcazar
Javier Viguera
Jose Diaz de Grenu
Tatiana Leon
Mike Engel
Isaac Hermida