Some configuration files inside of the SDK make use of the default SDK
installation path, so some tools might break unless the SDK is installed in said
default path.
Recently, we modified the default installation path to include the platform and
the image type, but the image type was added after the SDK was created, so even
though the environment script's paths include the image type, the "original"
default path in the config files inside of the SDK doesn't include the image
type. A side effect of this is that Qt5 apps cannot be built, since the qmake
and Qt configuration files are pointing to the "original" SDK path.
Remove the image type from the path so that the paths in the SDK's config files
match the real default installation path.
This partially reverts commit be0fe088e3.
https://jira.digi.com/browse/DEL-6972
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The bootable artifacts that must go inside the installer ZIP image, are defined
in the variable BOOTABLE_ARTIFACTS. For platforms without RAM_CONFIGS, these
artifacts are obtained from the UBOOT_CONFIG variable.
This commit fixes the final artifact name added to the BOOTABLE_ARTIFACTS that
for some platform is not strictly the same that the UBOOT_CONFIG name.
For example for the U-Boot configuration "ccimx8mn_dvk", corresponds the
bootable artifact "ccimx8mn-dvk"
https://jira.digi.com/browse/DEL-6974
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the copy of the initramfs final image with the extension
*.tf when Trustfence is disabled. This was introduced by commit
5beec04b ("trustfence: Add Trustfence support for CCMX8X")
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Commit 5beec04b ("trustfence: Add Trustfence support for CCMX8X") introduces
a dependency when the imx-mkimage recipe and the SIGN_MODE is equal to AHAB.
However this dependency should be added only when the TRUSTFENCE_SIGN is equal
to 1 and when the SIGN_MODE is equal to AHAB, not only when the SIGN_MODE is
equal to AHAB. This commit introduces this double check.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 31d8ff94 ("meta-digi-arm: u-boot: Update recipes with new u-boot version")
updates the license checksum for the new u-boot_2019.04 recipe, however this
license file is different for the other u-boot versions.
This commit reverts this change and includes the updated checksum only for the
new u-boot_2019.04 recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Wrapped lines must have a back-slash symbol so that U-Boot
doesn't interpret them as finished.
The missing symbol resulted in the script not being able to
determine the U-Boot image to program in some cases.
Reported-by: Leonid Makhnovskiy <leonid.makhnovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6953
Regulatory domain support will be added completely with the 'regulatory-addon'.
Also simplify symlink management now that BDF file has the same name for
every platform.
https://jira.digi.com/browse/DEL-6841
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The ccimx8mn console is on ttymxc0 (uart1 thanks to aliases).
https://jira.digi.com/browse/DEL-6876
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
This file does not longer exist. It has been replaced by bdwlan30_US.bin,
which is already included to the community driver option.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Now that xbee-init supports multiple interfaces, add the XBee Cellular
GPIOs to the already existing XBee User ones to it so it can handle both
of them on the ccimx8mn DVK.
https://jira.digi.com/browse/DEL-6887
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
XBEE_RESET_N_GPIO and XBEE_SLEEP_RQ_GPIO can now be comma-separated lists of
GPIO indexes instead of just a single index. Modify the xbee-init script to
support this change and modify the sed script in xbee.bb to allow commas
in the aforementioned variables.
https://jira.digi.com/browse/DEL-6887
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update US Board Data File to fix a wrong calibration of channel 7 (2442 MHz).
The rest of the file remains the same.
The new BDF is:
- bdwlan30_US.bin (f6ec3328309aaa3e187295446966ab27)
https://jira.digi.com/browse/DEL-6922
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- bdwlan30_US.bin (d5221377de1dde9ff442740e56fea647)
This file was generated by calibrating several CC8MN DVKs and
merging their resulting BDF files into a Golden file.
Reference calibration file is:
- bdwlan30_US.bin (a5635e39aaaa220094e0d07f7a4f4567)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The new driver uses the same files for both platforms (6564,
6574). The specific platform binaries have been removed.
Now the modifications of the nvm_tlv_3.2 to disable the IBS
is done by the recipe.
The disable of the deep sleep and the enable of the internal
clock is done in the recipe only for the CC6UL.
We have used the files from the following repo:
qca6574au-le-2-2-2_qca_oem -> 4d29c6886f2Commit label r00005.1
- CS2.2 0.0.005.1
md5sum
------------------------------------------------------------
nvm_tlv_3.2.bin -> a97cdfe80e8109cf3574f74cd3c73fc7
rampatch_tlv_3.2.tlv -> 72d28614afd0abe5846c1758099282e3
https://jira.digi.com/browse/DEL-6766
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update the wireless driver to a newer version that supports both
chips (qca6574 and qca6564).
We keep the same bdwlan30_US.bin files as the previous version
of the driver (or fakeboard_US for the qca6474).
Rename directories to qca65X4_driver_interface.
We have used the files from the following repo:
qca6574au-le-2-2-2_qca_oem -> 4d29c6886f2Commit label r00005.1
- CS2.2 0.0.005.1
md5sum
----------------------------------------------------------
qca65X4_pcie: otp30.bin -> 9d1cf03473904bd8b97fa30bc92b4a16
qwlan30.bin -> 794f7a6f12ef3e6f8db6257b3a6f896f
utf30.bin -> 41cfb4e50613cd0eeb0fa99a005131bd
qca65X4_sdio: otp30.bin -> e018e7b629b055dc4616c7e88c615b41
qwlan30.bin -> fe37bc043132ecf21e504eb33f46b846
utf30.bin -> 4743dee015047752e433e69f4db89974
https://jira.digi.com/browse/DEL-6766
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Rework the weston-init recipe and add a BBMASK to ignore meta-freescale's
weston-init.bbappend file.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some .bbappend files for clutter, cogl and mesa recipes are already available
in meta-freescale, so we can remove them from meta-digi. Also remove the
libinput recipe, since a much newer version of it exists in poky.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Although the recipe was updated with the modifications in meta-fsl-bsp-release,
the revision was still pointing to the sumo-4.14.98-2.2.0 version of
imx-mkimage, which is incompatible with our recently updated patch.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to NXP's v1.3.0 porting kit and add power optimizations for suspend
mode.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Userspace firmware loading support is required for the Linux imx-sdma driver.
The patches that accomplish this were originally in poky, but were removed in
the thud upgrade. Re-work the patches so they apply over systemd v239.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, examples such as skeletalanimation are broken.
Reported-by: Alfonso Martin Rey <alfonso.martinrey@digi.com>
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCBRANCH in most recipes and SRCREV for gstreamer1.0-plugins-good.
update imx-gst1.0-plugin to v4.5.2.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to v2.5.4 and add new recipe imx-seco-libs. For the time being, use the
B0 firmware for all i.MX8QXP platforms and leave C0 support in a comment.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCREV and SRCBRANCH, change the names of the m4 demos that are
installed into imx-boot, change the name of the SECO firmware (ahab container)
and update our patch so it applies over the newest revision of imx-mkimage.
For the time being, use the B0 SECO firmware for all i.MX8QXP platforms and add
the changes needed for C0 support in comments.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update the values of the MACHINE_SOCARCH_FILTER variable with the ones in
meta-fsl-bsp-release's imx-base.inc.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Gabriel Valcazar
Arturo Buzarra
Mike Engel
Francisco Gil
Hector Palacios
Gonzalo Ruiz
Javier Viguera
Hector Bujanda