This is required to be able to use the whole RootFS partition which is
512 MiB in the 0x04 CC6UL SOM variant.
The old value only allowed to manage partitions of up to 256 MiB, this new
value allows for up to 1 GiB (assuming 128 KiB erase block size).
https://jira.digi.com/browse/DEL-4567
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
A mechanism was introduced in U-Boot to dynamically locate the environment
copies within a NAND partition, skipping bad blocks and making full use of
the partition blocks.
To trigger this mechanism in Linux tools (fw_printenv/fw_setenv) the
configuration file /etc/fw_env.config must have both copies entries
pointing to the same offset.
This commit substitutes the hardcoded configuration file for CC6UL with a
stub and generates one on an RPM post-script basing on:
- Supplied DEY variables (with default values per platform):
- UBOOT_ENV_OFFSET: starting offset of the environment within the
partition.
- UBOOT_ENV_SIZE: size of each copy of the environment.
- UBOOT_ENV_RANGE: size in the partition that the environment copies may
occupy, starting from UBOOT_ENV_OFFSET. If undefined, the whole
partition is used.
- Calculated values:
- NAND Erase block size
- Number of blocks available for the environment copies
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4256
This library adds support to use the Atmel CryptoAuth device available
in the ConnectCore 6UL.
https://jira.digi.com/browse/DEL-4284
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
This allows to override the console using the local.conf.
https://jira.digi.com/browse/DEL-2856
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The main purpose is to improve our kits usability. This way users do not need
to follow the steps in the documentation to change from static to DHCP IPs.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
This commit adds the wireless concurrent mode as a default
configuration to the CC6UL machine.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3818
This commit adds a wpa supplicant P2P configuration file and configures
the p2p0 interface automatically at pre-up.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- Added the new image type 'recovery.vfat' to the DEY images
generation process. This new image is a clone of the 'boot.vfat'
but including the recovery ramdisk and the recovery boot script.
- Added the new image type 'recovery.ubifs' to the DEY images
generation process. This new image is similar to the 'boot.ubifs'
but including the recovery ramdisk and the recovery boot script.
Signed-off-by: David Escalona <david.escalona@digi.com>
The i.MX6UL supports some basic multimedia functionality
using the pixel pipeline (PXP).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2358
This application can be used to:
- Update the MCA firmware
- Configure the tamper settings
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3230
This commit adds the proper DEFAULTTUNE and overrides for the ccimx6ul
family of modules.
https://jira.digi.com/browse/DEL-3102
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The name "ext-eth" seems to indicate "External Ethernet". Rename that variable
and related ones to a more proper name like second ethernet.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This reverts commit b8f50680e5.
The support to read and write to an encrypted environment has been added, so
there is no need to exclude the u-boot-fw-utils anymore.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
APM is an ancient power management API mainly for x86. There is an
optional emulation layer for ARM, but none of our platforms is using
it, so just remove the machine feature.
https://jira.digi.com/browse/DEL-2745
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
enabled
There is currently no support on fw_printenv/fw_setenv to access an
encrypted environment.
This commit removes the package if U-Boot environment encryption is
enabled to avoid environment corruption on access.
It also documents the issue as a known issue.
https://jira.digi.com/browse/DEL-2625
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This device tree file corresponds to StarterBoard with ID=129
which corresponds to smart part number CC-WMX6UL-START.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot environment on the CC6UL NAND is located at partition /dev/mtd1:
- original copy is located at offset 0 in the partition
- redundant copy is located 1 erase block (128K) after the original copy
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2552
The size of the destination partition (linux) is around 14MiB so the
max-leb-cnt must be reduced compared to the one used for the rootfs
partition.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2697
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
The u-boot-dey recipe is now fully shared by ccimx6 and ccimx6ul platforms
so we can remove the platform-specific appends.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit will add the cryptodev module to the CC6UL kernel to use
the CAAM from user space through this device.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-2719
This function is deprecated in favor of bb.utils.contains. The same
change has been done in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The CC6UL does not support booting from SD card, so it does not make
sense to create a SDCARD image by default.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This daemon (rngd) feeds random data from hardware device to kernel
entropy pool.
https://jira.digi.com/browse/DEL-2501
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This module is the interface between user-space (openssl, gnutls) and
the hardware cryptographic acceleration support (CAAM).
This commit installs the module in the rootfs and configures it so it is
loaded on boot.
https://jira.digi.com/browse/DEL-2501
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There are different SBC boards IDs each one having a different
device tree file in the form imx6X-ccimx6sbc-idZZZ.dtb, where:
X is the CPU family (q=Quad/Dual, dl=DualLite/Solo).
ZZZ is the board ID number.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2160
That's the u-boot configuration used by variants 0x07 and 0x09, which
have been cancelled and are no longer supported by DEY.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Now that the MX5 platforms have been removed the only value for
WPA_DRIVER is 'nl80211' (used by Atheros wireless driver), so there is
no need to have a platform specific value.
Just initialize the value in the init-ifupdown recipe with a weak
assignment so it can be override from the project's local.conf.
https://jira.digi.com/browse/DEL-1890https://jira.digi.com/browse/DEL-1969
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These tools are part of the official FSL gst1.0 plugin. Add then to the
MACHINE_GSTREAMER_1_0_PLUGIN variable so they get added to the rootfs.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Also remove QT4 phonon patches and qtmediaplayer demo as they depend on
gstreamer-0.10.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This synchronizes the machine configuration files with the latest
changes in meta-fsl-arm for yocto 2.0
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Split the ATH6KL firmware files to a different recipe and package so
they can be used regardless of what driver we are using (the external
module or the upstream driver).
Reuse the 'firmware-atheros' recipe which was creating a package with
bluetooth firmware, to create the package with wireless firmware as
well.
Also remove 'ccimx6' as compatible machine for the external atheros
module, as the module does not even compile with the kernel version we
are using (3.14).
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Javier Viguera
Diaz de Grenu, Jose
Hector Palacios
Tatiana Leon
Mike Engel
Alex Gonzalez
David Escalona
Isaac Hermida