These dependencies went missing when we deleted our first .bb file and replaced
it with a .bbappend. Without these dependencies, the build can sometimes fail.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variant is exactly the same as variant 0x02, but with a new revision
of the i.MX6UL silicon.
https://jira.digi.com/browse/DEL-6555
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update following firmware binaries to tag r10005.1 from
qca6574au-le-2-2-1_qca_oem repo at meta_build/firmware/sdio/
in order to support fast roaming (802.11r) for the qca6564
wireless chip:
e018e7b629b055dc4616c7e88c615b41 otp30.bin
8b638fdaf21f089940d98db518323767 qwlan30.bin
d6ece5037e595000770fbbb6015c0461 utf30.bin
https://jira.digi.com/browse/DEL-6496
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update u-boot-fw-utils patches to apply on current upstream version. Remove
recipe for version 2017.09 since both U-Boot v2017.03 and v2018.03 work fine
with the newer version.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Most of the support has been added to the meta-freescale layer, so
substitute our recipe for a .bbappend and redefine the tasks to build
U-Boot images for our two variants (1GB and 2GB).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Every task in this recipe is already supported in the same way in the
meta-freescale layer, so just keep the .bbappend file to select SRCBRANCH and
SRCREV.
The DDR patch can be removed since that source code is now included into the
SCFW project.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This adds support for U-Boot v2018.03 for CC8X platforms only.
Create 'digi-u-boot.inc' with the common definitions for both v2017.03
and v2018.03.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (f9f8dc905be5732525e0c9e8db7822f3)
This file was generated by calibrating several CC8X SBC Pro boards and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10005.1 on
qca6574au-le-2-2-1_qca_oem repo.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This version supports OpenSSL v1.1.0 by default, which is used in DEY 2.6.
Trying to build older versions of the package will result in failures, so
remove support for said versions entirely.
Our patches apply cleanly except for the hab4_pki_tree.sh automation patch,
which needs a small tweak so it can get applied over the latest version of the
script.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Fix write operation by moving the re-lock of the mmc partition
after performing the system synchronization, if not the mmc
driver throws read-only errors. Also, improved the code
to avoid compilation warnings because the return values were
not managed in write operations.
https://jira.digi.com/browse/DEL-6449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bitbake was using the imx-atf recipe inside of meta-freescale instead of ours.
Said recipe was compiling a different tag, causing our kernel to stop loading
when using our generated imx-boot images.
Remove our .bb file and add a .bbappend that changes the source code revision
to the tag compatible with the rest of the imx-boot files.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Device tree file names won't have the kernel image type like a
prefix anymore, since thud uses the original file names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is a new intermediate file that will be reused in every iteration if it's
not removed, causing all imx-boot images to have the same U-Boot binary.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Up to now, the ConnectCore 8X was using the Bluetooth firmware
files from model QCA6564 r110059.1.
This commit adds the firmware files from repo 'qca6574au-le-2-2-1_qca_oem'
at tag r10005.1:
nvm_tlv_3.2.bin: 3de46ea023570b86cabb9502b92a1fed
based on MD5SUM a97cdfe80e8109cf3574f74cd3c73fc7 but changed
byte 0x36 (decimal 54) to 0x02 (IBS)
rampatch_tlv_3.2.tlv: e8cdb0260615e02bd21c3b3fcaf832eb
The recipe has changed to use the variable QCA_MODEL and each firmware
has moved to a folder of its own.
While on it, remove old Bluetooth firmware files 3.0 which were
not used.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6218
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without these symlinks, U-Boot images will be left out of the installer .zip
file. Unlike the v2015.04 recipe, the default symlinks aren't removed, because
they're needed in the imx-boot recipe for the ccimx8x.
https://jira.digi.com/browse/DEL-6333
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is only a cosmetic change to break away from NXP's versioning and use our
own from now on.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This reflects the fact that the firmware is customized for Digi platforms. The
versioning still follows the one used by NXP in their recipe.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches were originally introduced in the recipe because the DCD files
were needed by mkimage to create the final imx-boot binaries. Now they are
in the SCFW source code instead.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The "sha384sum" tool included in the coreutils package is needed by mkimage
when creating the imx-boot image.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, the default imx-boot images will include the Cortex M4 demo.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These adaptations include changing the mkimage targets and removing any
handling of the DCD files, since they are now included in the SCFW. Note that
these changes break support for step A0 of the silicon.
The md5sum of the imx-sc-firmware tarball will be updated once the step B0 CPUs
are ready.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When the imx-boot recipe is added in EXTRA_IMAGEDEPENDS the
license file is being referenced in image postcommand
write_deploy_manifest, but the licenses of the dependant
packages are missing. This leads to the license files of the
recipes to be missing when write_deploy_manifest runs,
causing build errors to appear.
https://jira.digi.com/browse/DEL-6251
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gabriel Valcazar
Hector Palacios
Francisco Gil
Gonzalo Ruiz
Arturo Buzarra
Mike Engel