This commit changes the linux and recovery UUID when booting
the system in single mode.
https://onedigi.atlassian.net/browse/DEL-9244
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Some settings were incorrectly set. Align the card settings with the
same values used in our other platforms.
https://onedigi.atlassian.net/browse/DEL-8703
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Based on the environment variable emulate-cc91:
* Limit the ram memory to 512MB
* Enable the overlay _ov_som_emulate-ccimx91_ccimx93.dtbo
* Disable the npu node
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Both CC93 and CCMP2 store the environment at the end of BOOT1 partition
and the redundant environment at the end of BOOT2 partition. Reuse the
'fw_env.config' file defined for CC93 for both platforms, and also include
CC91 in the process.
https://onedigi.atlassian.net/browse/DEL-9119
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
In CCMP2 the HWID is stored in 3 consecutive fuse words, now the third word has
the following scheme:
| 31..18 | 17 | 16 |15..12| 11..7 |6..3| 2..0 |
+--------+----+-------+------+---------+----+------+
| -- | BT | Wi-Fi | RAM | Variant | HV | Cert |
+--------+----+-------+------+---------+----+------+
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The main recipe already contains this file on the SRC_URI.
No need to append for every platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add initial support cloned from ccmp15, based on v2022.10 from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
When running the installation script on variants with larger NANDs, two of the
script's commands take longer than our intended timeouts under specific
circumstances:
* When the variant has a NAND with 512 MiB or more and singlemtdsys is set
to "yes", running ubivolscipt takes longer than our 10 second timeout.
The larger the NAND storage size, the longer this command takes.
* When the variant has a 1 GiB NAND, singlemtdsys is set to "yes" and
dualboot is set to "no", the update of the recovery UBI volume takes
longer than our 15 second timeout.
In both of these cases, the script fails and the installation process cannot
continue. Apply the following changes to prevent this:
* Increase the ubivolscript timeout from 10 seconds to 30
* Increase the recovery update timeout from 15 seconds to 20
Also, remove the command immediately before ubivolscript is run, since said
command is already being run at the beginning of ubivolscript.
https://onedigi.atlassian.net/browse/DEL-9097
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
One of the conditions used to determine the U-Boot file was missing its
terminator, breaking the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 26dc437a25)
On devices with NAND as storage media, a post install script
modifies the fw_env.config file basing on the NAND geometry.
This only happens once after deployment, typically on production
environments. If the power is removed soon after the post install
script runs (which is a normal procedure on manufacturing
environments), there are chances that pending file system
operations have not been flushed, which may occasionally lead
to the fw_env.config file end up empty on the next reboot.
This commit adds a sync at the end of the post-install script
to guarantee the changes are written to the file system.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9059
There is a corner case that wasn't cover by the script, if you
use the script using a -k -t the "-t" would be the name of the
dek.bin.
This new implementation solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
By default is trying to install an artifact imx-boot--<platform>
if trustfence is not enabled.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Some variables in the script belong to u-boot, not to the shell
running the script. Escape those variables so the shell does not
expand them.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The command trustfence update doesn't require the partition argument.
Besides of that, remove extra fi on the cc8m platforms.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
* Move Digi code out of the upstream files to minimize conflicts in
version migrations.
* Remove all the TEE client copied code and use the libteeclient library.
* Some fixes in the Optee-based environment encryption
* Some simplifications in CAAM-based environment encryption.
https://onedigi.atlassian.net/browse/DUB-1079
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment, this overlay adds RTC calibration to compensate
the drift observed in the 32kHz input frequency of hardware
version 1 of the SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8987
Update BDF file used on CC8MN and CC8MM with a new calibration
(GOLDEN3) to obtain a flatter frequency response and a better EVM
performance.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem'
repo at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin'
(MD5SUM: 8a40d95698825e1718bee640b1f7982a).
Target output powers tables and CTL tables remain intact.
Changes required to pass the EN 300 328 V2.2.2 blocking test also remain
intact.
New BDF file:
- bdwlan30_US.bin (86180198440e6ab53734aabf0112c6ba)
https://onedigi.atlassian.net/browse/DEL-9001
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit fixes u-boot Trustfence naming for signed and
encrypted images used in the installation script removing
the a duplicated dash in the u-boot name.
https://onedigi.atlassian.net/browse/DEL-8271
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Add a check on the existence of the "temp-fitimg-loaded" environment
variable before setting it. It is needed, as with encrypted FIT images,
we need to decrypt them before accessing the boot script. In such cases,
u-boot sets that variable to "no" so the boot script does not override it,
and the FIT image is loaded again before the final boot to the OS.
https://onedigi.atlassian.net/browse/DEL-8945
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The signing tools have a dependency of libQt5Core.so.5, which implies that this
library must to be installed on the native PC. This commit includes all the
required shared libraries for the signing tools inside the own package to avoid
external dependencies. With this change there is not needed any more the qtbase
dependency at build time.
Package version has been bumped to 1.2.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
- For Qualcomm QCA65x4 platforms:
Add support to create the 'World' board data file for the QCA65x4 Wi-Fi
chip to operate on World regulatory domain.
Kernel wireless driver already supports selecting the correct file based
on the configured Regulatory Domain via Kernel command line argument
'wlan.regdmn', which allows the following parameters:
* "US", for U.S.A. (default)
* "World", for worldwide
- For Murata type2AE platforms:
Add World CLM blob file for the wireless interface and JRL hcd file for
the Bluetooth interface. Also add the autocountry ininitialization script
and systemd service.
World CLM blob file:
- cyfmac4373-sdio_World.clm_blob (1abe7f3fa86d4123b0586cbbf0ec91ac)
Kernel wireless and bluetooth drivers already support selecting the correct
files based on the configured Regulatory Domain via Kernel command line
arguments 'brcmfmac.regdmn' and 'btbcm.regdmn' respectively, which allow the
following parameters:
'brcmfmac.regdmn':
* "US", for U.S.A. (default)
* "World", for worldwide
'btbcm.regdmn':
* "FCC.CE", for U.S.A., Europe and the rest of the world (default)
* "JRL", for Japan
https://onedigi.atlassian.net/browse/DEL-8905
Co-authored-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Different mechanisms are used to sign FIT images on the ccmp1 platforms and the
ccimx93, and we manage each mechanism via a different variable. The variable
names don't really reflect which platform they affect, which makes maintenance
harder.
Rename the variables so that it's easier to identify the platforms/vendors they
affect:
* Replace TRUSTFENCE_FIT_IMG with TRUSTFENCE_SIGN_FIT_STM
* Replace TRUSTFENCE_SIGN_FIT_ARTIFACT with TRUSTFENCE_SIGN_FIT_NXP
Don't rename TRUSTFENCE_FIT_IMG_SIGN_KEYNAME
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Unless we have a use case in which we need to apply these fragments separately,
we can merge them both into a single fragment.
https://onedigi.atlassian.net/browse/DEL-8946
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This logic was fixed in commit e915a14b4b, so we
no longer have to manually copy the bootscript to generate FIT images.
https://onedigi.atlassian.net/browse/DEL-8946
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We rely on FIT support to implement boot artifact authentication on ccmp1
platforms, but our implementation made it impossible to enable FIT support
outside of the context of Trustfence/secure boot.
Change this so that it's possible to enable FIT support without having to sign
the FIT artifacts. Also, modify the linux-dey 5.15 recipe so that the U-Boot
DTBs with signatures get copied only when FIT signing is enabled.
https://onedigi.atlassian.net/browse/DEL-8946
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates the required firmware binaries for Bluetooth and Wireless
interfaces, hostapd and wpa_supplicant recipes based on the Cypress Linux WiFi
Driver (FMAC) release v5.15.58-2023_1128 (Wireless firmware v13.10.246.334).
This change also includes a custom defconfig file for the hostapd and
wpa_supplicant recipes including the changes from the patches and the Digi
customizations.
Also are updated the Murata firmware repositories to match with the latest
Murata release imx-kirkstone-hedorah_r1.0, which is based in the same Cypress
Linux Wifi Driver release v5.15.58-2023_1128.
https://onedigi.atlassian.net/browse/DEL-8667
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Francisco Gil
Arturo Buzarra
Mike Engel
Isaac Hermida
Hector Palacios
Javier Viguera
Gonzalo Ruiz
Gabriel Valcazar