This firmware was built using commit 9a6f1cbba2f49d2284c4211688d3cdd12fc67eca
in our cc8x-scfw repo.
https://jira.digi.com/browse/CC8X-149
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, move all of the recipe's patches from the .bbappend file to the .bb file,
because the .bb file's modifications depend greatly on said patches.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.
The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:
* Support for our platform (based on the mx8qxpa0, which uses A0-specific
parameters for mkimage and appends the DCD explicitly)
* Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
string per platform; so the compile, install and deploy functions had to
be tweaked to build both 1GB and 2GB variants for our platform).
Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In order for Yocto to append all the necessary firmware binaries to the U-Boot
image, this recipe needs to be up to date.
Also, remove the older hardcoded SRCREV in our .bbappend file. The file that
gets patched hasn't been modified since beta1, so our patch apllies cleanly to
beta2.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This adds and AHAB container to the QXP binaries, although according to the
makefiles in the mkimage package, it isn't used in the A0 revision of the CPU.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is needed to match U-Boot's SC API changes. Also, for now, use NXP's
A0 version of the firmware without our customizations until we have access to
the new SCFW SDK.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ATF binary's source code needs to be updated for the new U-Boot to work
properly.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates firmware binaries to tag r10004.2 from
https://stash.digi.com/scm/linux/qca6574au-le-2-2-1_qca_oem.git
and modifies the recipe to use the QCA6574 proprietary driver by default.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 5.4.37 recipe already exists on meta-freescale and the
bbappend was wrongly resetting the COMPATIBLE_MACHINE to only
the ccimx8x.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot's 'dboot' command now supports uncompressing Image.gz.
This will be the default kernel image type for the CC8X.
This also changes the names of the device tree artifacts, that must be
updated on the boot script. While on it, add support for all the SOM
variants (wireless and non-wireless).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This was done using Excel aid sheet:
MX8QXP_LPDDR4_register_programming_aid_ValidationBoard_1.2GHz_v7_DBI_enabled.xlsx
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe builds the Device Configuration Data (DCD) that
configures DRAM controller before the bootloader.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The firmware-qualcomm recipe now provides the Bluetooh and WiFi firmware
for QCA6564 (CC6UL, CC6PLUS) and QCA6574 (CC8X).
The Bluetooth firmware is the same for both chip models.
Regarding the Wifi firmware:
- If using the QCA6564, the proprietary firmware is used.
- If using the QCA6574, the recipe allows to select between the proprietary
or the community driver (via QUALCOMM_WIFI_DRIVER), and will install the
associated firmware. For the community driver, the firmware files have
been copied from linux-firmware repo at SHA1 7518922bd5b9, except for
the file 'board.bin' which needs to be substituted with the proprietary
one by Qualcomm. Default, is to use the community driver.
The do_install() has been improved for re-using the variables with the list
of files.
The package has been renamed basing on the QCA_MODEL variable which can
be set per platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This adds support for U-Boot v2017.03 for all platforms (including CC8X).
For legacy v2015.04:
- Renames u-boot.inc as a versioned file only for v2015.04.
- Moves boot/install scripts from versioned folder into non-versioned
folder (since the scripts remain the same between versions).
For new v2017.03:
- Re-uses poky's u-boot.inc in rocko for v2017.03
- DEY recipe re-writes the do_compile for special U-Boot configuration
required for TrustFence.
- DEY recipe appends the do_deploy, for U-Boot scripts and deploy of
special TrustFence artifacts.
- Adds u-boot-dtb.xxx to UBOOT_CONFIG, required for new U-Boots.
- Adds CC8X scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
Under certain circumstances I was able to create a microSD card with
the FAT file system but corrupt partition table like this one:
Device Boot Start End Sectors Size Id Type
/dev/sdf1p1 778135908 1919645538 1141509631 544,3G 72 unknown
/dev/sdf1p2 168689522 2104717761 1936028240 923,2G 65 Novell Netware 386
/dev/sdf1p3 1869881465 3805909656 1936028192 923,2G 79 unknown
/dev/sdf1p4 2885681152 2885736650 55499 27,1M d unknown
Specifying the partition index made the install script to fail, but
not specifying it makes it work, although it also falls back to use
the first partition in the table.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
In the old u-boot-fw-utils 2016.x the function 'fw_env_close' wrote
the environment to the media. That is no longer the case, now that
function only frees the memory used, and 'fw_env_flush' is used
to write the environment.
This was causing that userspace application using this library were not
able to write changes to the environment.
https://jira.digi.com/browse/DEL-5644
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Generate and include the host tools in the SDK when Trustfence is enabled.
This makes it easier to use the standalone signing and encrypting scripts.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This allows us to save around 4MiB of space in the rootfs image.
(see commit in poky/meta 71ca295786e35b7be84bfd4bc04e0c3ec0f97cd8)
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Support for dynamic location of U-Boot environment was added in
commit 2b5017956b. This forward ports
the patch to Yocto 2.4.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5574
As a side effect, remove U-Boot entry point variable and LOADADDR
extra parameter from the kernel recipe.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5554
Some packages are not updated in meta-freescale/rocko, so we do
need to include some of these.
The patches for gstreamer in the original commit are skipped, as
poky/rocko uses a newer version.
This partially reverts commits:
* 52a10ff88d.
* b06c81b277https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All these recipes and patches are now available and maintained in the
meta-freescale layer.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Pending to update the patch for dynamic environment location in NAND.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
When parsing the recipe, a warning is shown because the tarball is only found
in the downloads folder. However this is expected as it cannot be distributed.
As a workaround, add the tarball to the SRC_URI variable only when Trustfence
is active. That way the warning is not shown in all other cases.
This was incorrectly removed in commit 14fc51147f.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
U-Boot has been able to boot kernel zImage for a long time so make this
the default kernel image.
For the CC6 we still want to use uImage for compatibility reasons.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5237
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit includes ccimx6qpsbc platform in the recipe and adds
U-Boot scripts for deploying and booting the system.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
CC6 PS_ASIC_class_1.pst MD5SUM be8766069eed652449682d9006dd6ecd
https://jira.digi.com/browse/DEL-5057
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new fw-4.bin (v3.4.0.236) with md5sum e2fc33daba2c35fe2c4f62492a44f8b6
was used to pass RED (Radio Equipment Directive) certification on the CC6
module.
https://jira.digi.com/browse/DEL-4512
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
A mechanism was introduced in U-Boot to dynamically locate the environment
copies within a NAND partition, skipping bad blocks and making full use of
the partition blocks.
To trigger this mechanism in Linux tools (fw_printenv/fw_setenv) the
configuration file /etc/fw_env.config must have both copies entries
pointing to the same offset.
This commit substitutes the hardcoded configuration file for CC6UL with a
stub and generates one on an RPM post-script basing on:
- Supplied DEY variables (with default values per platform):
- UBOOT_ENV_OFFSET: starting offset of the environment within the
partition.
- UBOOT_ENV_SIZE: size of each copy of the environment.
- UBOOT_ENV_RANGE: size in the partition that the environment copies may
occupy, starting from UBOOT_ENV_OFFSET. If undefined, the whole
partition is used.
- Calculated values:
- NAND Erase block size
- Number of blocks available for the environment copies
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4256
This is a Consumer dual-core 1GHz, 4GB eMMC, 1GB DDR3, 0/+70C variant
without bluetooth, no wireless, no kinetis.
https://jira.digi.com/browse/DEL-4280
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results including the 2 dB power reduction
from DVT.
md5sums:
a5635e39aaaa220094e0d07f7a4f4567 bdwlan30_US.bin
cabebad84a6afc1c2a7d795d31dda480 bdwlan30_World.bin
https://jira.digi.com/browse/CC6UL-740
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Variant 0x04 has wireless and must select the '-wb' device tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4100
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
The firmware configuration and the driver configuration are part of the
driver repository. Stop duplicating the content in meta-digi so they
are updated with the driver itself.
https://jira.digi.com/browse/DEL-4021
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will allow to get the package from a premirror in case it is not
already downloaded in the DL_DIR.
https://jira.digi.com/browse/DEL-3051
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- Instead of using a different boot script when booting from linux
and from recovery, merge them into one script that checks the
boot source.
https://jira.digi.com/browse/DEL-3836
Signed-off-by: David Escalona <david.escalona@digi.com>
Patches added in 'meta-swupdate' (backported from U-Boot) broke our
layer. We also had those patches, so remove them and make sure the
rest or our patches are applied after the ones from 'meta-swupdate'
by using an anonymous python function instead of appending to the
SRC_URI variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new calibration settings
updated with the latest certification results.
md5sums:
bdwlan30_US.bin: f2c414adb682a8cd95e72593fad7fa08
bdwlan30_World.bin: 12e2bae1a871e2a3dfa6ded0ee675c09
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Refresh the patches with GIT so they apply cleanly using "git am".
Otherwise they fail with:
Applying: openssl_helper: use /dev/urandom as seed source
error: corrupt patch at line 16
Patch failed at 0003 openssl_helper: use /dev/urandom as seed source
Applying: hab4_pki_tree.sh: usa a random password for the default PKI generation
warning: keys/hab4_pki_tree.sh has type 100755, expected 100644
Notice that they were not failing in Yocto, as it does not use "git am"
to apply patches, but it's better to have the patches correctly done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Gabriel Valcazar
Arturo Buzarra
Hector Palacios
hbujanda
Gonzalo Ruiz
Jose Diaz de Grenu
Isaac Hermida
Francisco Gil
Mike Engel
Javier Viguera
Alex Gonzalez
Tatiana Leon
David Escalona
Pedro Perez de Heredia