Update to NXP's v1.3.0 porting kit and add power optimizations for suspend
mode.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to v2.5.4 and add new recipe imx-seco-libs. For the time being, use the
B0 firmware for all i.MX8QXP platforms and leave C0 support in a comment.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCREV and SRCBRANCH, change the names of the m4 demos that are
installed into imx-boot, change the name of the SECO firmware (ahab container)
and update our patch so it applies over the newest revision of imx-mkimage.
For the time being, use the B0 SECO firmware for all i.MX8QXP platforms and add
the changes needed for C0 support in comments.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update the values of the MACHINE_SOCARCH_FILTER variable with the ones in
meta-fsl-bsp-release's imx-base.inc.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The LPDDR4 retention code is executed as part of the suspend/resume process.
When resuming, this code writes to a register that doesn't exist on the
i.MX8MN, causing the system to freeze before control is returned to Linux.
Add a patch that introduces a compile-time check for the SoC type to avoid
performing the write operation on the i.MX8MN.
https://jira.digi.com/browse/DEL-6914
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The Cortex-M7 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Nano DVK board to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
For the i.MX8M processors, the do_deploy support is provided by
the upstream recipe firmware-imx-8m.
https://jira.digi.com/browse/DEL-6911
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
WPA and P2P configuration files are basically the same between all
platforms, so we remove all duplicated files to use a common file
and modify it in the recipe logic.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update the README as well to reflect this change, since the ftp protocol might
be blocked in some corporate networks.
https://jira.digi.com/browse/DEL-6880
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also remount the root filesystem as 'rw' when the symlinks need to be
updated.
https://jira.digi.com/browse/DEL-6760
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Obtain the mount point of the filesystem to remount as 'read-write' from
/proc/mounts to avoid issues related to df output wrapping on a second line
when the device filesystem name is too long.
When the script finishes, remount the filesystem as 'read-only' if that was
the original access permission.
https://jira.digi.com/browse/DEL-6760https://jira.digi.com/browse/DEL-5854
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a332ff445f)
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This adds the same example application that was used for the old version of the
library, but it has been separated into a proper package this time.
Recommend said package when installing the library.
https://jira.digi.com/browse/DEL-6826
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This version is based on the 20190517 master release, with the addition of
pkcs11 provisioning support.
The source code now has cmake files, so we don't need as many code
customizations as we used to. Revamp the recipe and its patches.
https://jira.digi.com/browse/DEL-6826https://jira.digi.com/browse/DEL-6835
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This imx-seco recipe manages now the NXP IMX SECO firmware, it was removed
from the firmware-imx recipe.
https://jira.digi.com/browse/DEL-6823
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Generalize script to select the correct board data file to load into the
wireless chip depending on the Regulatory Domain configuration whether it
is a variation of 'bdwlan30.bin' or 'fakeboar.bin'.
If 'bdwlan30_US.bin' or 'bdwlan30_World.bin' files are found in the firmware
directory, the script will create two symlinks, 'bdwlan30.bin and 'utfbd30.bin',
pointing to either one of those files.
If no 'bdwlan30_*.bin' files are found, but 'fakeboar_US.bin' or
'fakeboar_World.bin' is, it will create a single symlink, 'fakeboar.bin',
pointing to either one of those files. In the case a QCA6574 community driver
is loaded, 'board.bin' symlink will be updated.
If no 'fakeboard_*.bin' files are found either, the script will exit.
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Digi Embedded Yocto 2.6-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Generalize script to select the correct board data file to load into the
wireless chip depending on the Regulatory Domain configuration whether it
is a variation of 'bdwlan30.bin' or 'fakeboar.bin'.
If 'bdwlan30_US.bin' or 'bdwlan30_World.bin' files are found in the firmware
directory, the script will create two symlinks, 'bdwlan30.bin and 'utfbd30.bin',
pointing to either one of those files.
If no 'bdwlan30_*.bin' files are found, but 'fakeboar_US.bin' or
'fakeboar_World.bin' is, it will create a single symlink, 'fakeboar.bin',
pointing to either one of those files. In the case a QCA6574 community driver
is loaded, 'board.bin' symlink will be updated.
If no 'fakeboard_*.bin' files are found either, the script will exit.
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (e1db4a300b58776f8abd8588beadc09e)
This file was generated by calibrating several CC8X SOMs and SBCs and
merging their resulting BDF files into a Golden file.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Default poky's version of the 'mount.sh' script doesn't account
for the possibility of udev calling twice the script for the 'add'
action. This has been observed on USB sticks connected to a USB hub
and, although the script eventually fails, for already mounted
partitions, in that case the script tries to remove the created
mountpoint, when it shouldn't.
This patch checks for already mounted partitions earlier (before
creating the mount point) and returns with no actions.
The patch that it adds (with respect to poky's thud default) is
the following:
diff --git a/meta/recipes-core/udev/udev-extraconf/mount.sh b/meta/recipes-core/udev/udev-extraconf/mount.sh
index 3ee67b13183a..e6882a69c223 100644
--- a/meta/recipes-core/udev/udev-extraconf/mount.sh
+++ b/meta/recipes-core/udev/udev-extraconf/mount.sh
@@ -38,6 +38,12 @@ done
automount_systemd() {
name="`basename "$DEVNAME"`"
+ # Skip already mounted partitions
+ if [ -f /run/systemd/transient/run-media-$name.mount ]; then
+ logger "mount.sh/automount" "/run/media/$name already mounted"
+ return
+ fi
+
# Skip the partition which are already in /etc/fstab
grep "^[[:space:]]*$DEVNAME" /etc/fstab && return
for n in LABEL PARTLABEL UUID PARTUUID; do
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6759
Update file:
- fakeboar.bin (3e558869e3943da08899abd881455bc6)
This file was generated by calibrating several CC8X SOMs and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The current scripts used the standard mount binary at /bin/mount
for mounting the partitions. Systemd however seems to have a monitor
that eventually umounts such partitions if not mounted by systemd's
specific command 'systemd-mount`.
For platforms using systemd, we need to use this binary together with
parameter --no-block so that partitions are mounted correctly during
the boot process.
This commit merges the two scripts for Digi-handled partitions into
just one:
mount_bootparts.sh
\
+--> mount_digiparts.sh
/
mount_partition.sh
The merged script:
- checks if running with systemd, to use its binary.
- checks if running with busybox, to not use the unsupported '-o'
attribute.
- checks if mounting the 'linux' partition, to mount it read-only.
- checks for already-attached UBI devices, to avoid re-attaching.
This commit also combines the Digi-handled partitions (linux, update)
into the same udev rule, to simplify it, and breaks the rules lines
for readability.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6744
Error message was being printed upon successful copy of the
MAC addresses file, instead of upon failure.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Latest release r10007.1 updates the following files from qca6574au-le-2-2-1_qca_oem
repo at meta_build/firmware/pcie/:
- qwlan30.bin -> qwlan30.bin (60ac4486fba393294b590f86117f5539)
- utf30.bin -> utf.bin (c15794509d8a8435d4244fea699d99b3)
and the following files from meta_build/firmware/sdio/:
- qwlan30.bin -> qwlan30.bin (4421b30ca259ab73bbfa79df807e0b47)
- utf30.bin -> utf30.bin (b2651762aa1d620349593905efab326b)
Update Bluetooth firmware from qca6574au-le-2-2-1_qca_oem repo at
cnss_proc_1/btfm_proc/bt/wcss/bsp/rom/build/SCAQBAF/Test_Files/Linux/
- rampatch_tlv_3.2.tlv -> rampatch_tlv_3.2.tlv (72d28614afd0abe5846c1758099282e3)
- nvm_tlv_3.2.bin -> nvm_tlv_3.2.bin (3de46ea023570b86cabb9502b92a1fed)
Note: nvm_tlv_3.2.bin based on original md5sum
a97cdfe80e8109cf3574f74cd3c73fc7 but changed byte at
offset 0x36 from 0x82 to 0x02 (IBS).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6725
Remove our .bbappend, which was wrongly making this recipe compatible with the
imx8. Directly port NXP's recipe (v5.4.39), which is newer than the one in
meta-freescale (v5.4.38).
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Change the license type from "MIT" to "Proprietary". This change was taken
from the imx-sc-firmware recipe.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The 'soc_type' variable was already set by fastboot to "imx8qxp"
so the U-Boot board code that was setting this to just "8qxp" has
been changed to set it to "imx8qxp".
Update the scripts accordingly.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-901
On some scenarios, like when booting from NFS, the root filesystem is not
writteable. When this happens the qualcomm.sh is not able to write the MAC
file which so the wireless driver fails to load.
The arguments that U-Boot uses when booting from NFS using dboot result in
the root filesystem being mounted as read-only, but at some point it is
remounted as read/write. This happens after trying to load the wireless
driver, though.
Currently this is the only scenario in which we can reproduce the problem,
and there are several other processes in DEY that require a writeable root
filesystem (wireless SSID editing, Dropbear SSH key-gen and u-boot-fw-utils)
so remount the rootfs as writteable as a workaround.
While on it improve the script a bit to notify on error trying to create
this file, just in case this happens in other scenarios.
https://jira.digi.com/browse/DEL-5854
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All the dependencies of the required symbols are also added.
These are easier to mantain and enable the minimum support. If extra
features are required they shuold be explicitly added.
https://jira.digi.com/browse/DEL-6681
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This commit fixes two issues:
- Comparison clause uses only one equal sign
- Fix soc_type for Dual variants because the supported soc types
for the imx8 processor are: 8qm, 8qxp, and 8dx
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These images were broken in many ways, including ethernet not working and Linux
not booting. For now, revert back to the build command that was used in
DEY-2.6-r1.
https://jira.digi.com/browse/DEL-6677
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When using virtualization, ammend the kernel configuration so that docker
is supported.
https://jira.digi.com/browse/DEL-6681
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The meta-freescale-3rdparty layer used for the mainline bsp support does
not support the WiFi interface on thud. WiFi is currently merged on master
so it will probably be available on Zeus (2.8).
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
After the recent changes to generate the bootable artifacts, these are
now formed using the ${MACHINE} variable rather than the string in
${UBOOT_CONFIG} array, so the underscores must be changed with dashes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The artifacts that must go inside the installer ZIP image are not anymore
the ones in UBOOT_CONFIG. For CC8X, the artifacts are combinations of
UBOOT_CONFIG and RAM_CONFIGS.
This commit adds a function 'get_bootable_artifacts()' to boot-artifacts class
to generate a new variable BOOTABLE_ARTIFACTS with the list of bootable
artifacts DEY produces.
The installer recipe can then simply iterate on that list, rather than
needing to calculate it by itself.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
The existing loops were iterating through all RAM_CONFIGS, but
they must only iterate over those that match the RAM size on the
platform's UBOOT_CONFIG.
This commit adds a Python class 'boot-artifacts' to get the list of matching
combinations of RAM_CONFIGS and UBOOT_CONFIG so that the iteration
is easier to do than nesting loops inside one another.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
The recipe was creating a variable with the value of another one from
the main recipe, just to refer to the bootable artifact prefix.
We can now use instead the new UBOOT_PREFIX variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
A variable called IMAGE_BOOTLOADER was being used without distinction for
referring to two different things:
- the recipe that builds the bootable artifacts
- the prefix of those artifacts
The value of this is "u-boot" for most platforms, but "imx-boot" for the
CC8X based platforms.
The name of the variable is misleading, so this commit splits it into two:
- BOOTLOADER_IMAGE_RECIPE, to refer to the recipe
- UBOOT_PREFIX, to refer to the prefix of the bootable artifact
With the separation, the variable UBOOT_SYMLINK becomes a generic formed
one, so it is moved to digi-defaults.inc.
While on it, fix the image_types_digi.bbclass which was not making use of
the original variable to establish all the dependencies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Similar to the way the u-boot recipe does, create a symlink to the default
bootable artifact.
Since they are overwritten on every loop, this requires that the default
RAM configuration is set the last on the list of RAM_CONFIGS (same
convention than the one used on UBOOT_CONFIGS).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the rework to support variants, the machine name (actually the
UBOOT_CONFIG) was removed from the filename. Re-add it using
${MACHINE_NAME} which is more appropriate than the ${UBOOT_CONFIG} which
contains the RAM size (now present in ${ramc}).
While on it, remove one of the two symlinks on DEPLOYDIR. Only one makes
sense.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
Now the U-Boot binaries contain the RAM frequency and bus width, not just
only the RAM size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
There are several U-Boot binaries, depending on RAM size, at the moment:
- u-boot.bin-ccimx8x_sbc_pro512MB
- u-boot.bin-ccimx8x_sbc_pro1GB
- u-boot.bin-ccimx8x_sbc_pro2GB
and several SCFW files, depending on frequency, size, bus width, at the
moment:
- scfw_tcm.bin-1.2GHz_512B_16bit
- scfw_tcm.bin-1.2GHz_1GB_16bit
- scfw_tcm.bin-1.2GHz_1GB_32bit
- scfw_tcm.bin-1.2GHz_2GB_32bit
From these, we need to combine those that match the RAM size, to produce
bootable images for the different variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the arrival of DualX variants, the device tree files have been renamed
to contain the SOC type (8qxp, or 8dx). This is determined by a new U-Boot
variable 'soc_type'.
Default to "8qxp" if the variable is not defined (old U-Boots).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the arrival of DualX variants, the devicetree files have changed
their names to include the soc type (qxp, dx).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
Even though our ccimx6 and ccimx6qp images were using Linux v4.9 sources
correctly, they were using the same recipe as our images with Linux v4.14.
Technically, both recipes are identical (save for the branch name), but each
Linux version should have its own recipe.
Also, make sure that ccimx6/ccimx6qp images are built with our version of the
linux-imx-headers recipe instead of the one in meta-freescale.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We want to run the script if the 'wireless' node exits on the device tree.
This is to facilitate disabling of the wireless by removing that node.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6616
This recipe was updated in NXP's 4.14.98-2.0.1 patch release.
https://jira.digi.com/browse/DEL-6618
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The 'do_install()' call was doing a 'cd' command to later do symlinks
more straight forward.
This 'cd' however may affect further 'do_install' appends, that expect to
be working on the ${WORKDIR}.
Remove the 'cd' command and instead supply the correct paths to the 'ln'
commands.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 54bd1e47ad024515b737aea106dc4fca374c0fb8)
The new HWID fields make U-Boot create new variable 'module_ram'.
If it exists use it to select the U-Boot file to use during
firmware update. If not, fall back to old method of using the
variant code and the hard-coded table of variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6598
The new HWID fields make U-Boot create new variable 'module_ram'.
If it exists calculate new HWID fields to check if the SOM has
Wi-Fi, Bluetooth, etc. in order to select the device tree file.
If not, fall back to old method of using the variant code and
the hard-coded table of variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6598
P2P disabled is the default in the kernel module, so passing here the
parameter to 'modprobe' does nothing but prevents to set the parameter
in the kernel command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
P2P disabled is the default in the kernel module, so passing here the
parameter to 'modprobe' does nothing but prevents to set the parameter
in the kernel command line.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new development branch is based on NXP's v4.14.98 BSP.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga
for the imx8qxp.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe's package is meant for packages that require NXP-specific linux
headers.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
When using v1.5, we used a .bbappend to change the revision of the v1.5 recipe
in meta-freescale. Since we're upgrading to a version that isn't supported in
the other layers yet, remove the .bbappend and add the entire v2.0 recipe.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update NXP's .bbclass files with the ones in meta-fsl-bsp-release branch
sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These dependencies went missing when we deleted our first .bb file and replaced
it with a .bbappend. Without these dependencies, the build can sometimes fail.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Removing the flag breaks the build of the freetype package and possibly others.
Leave the flag as it is for now.
This reverts commit e4cbeafa1c.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This option configures gcc to use PIE by default, which is good from a security
standpoint. However, the files necessary to compile applications statically
with PIE support are missing from glibc, causing builds to fail. Said files
were removed on purpose in poky commit 472c86127ab57759588e5ec53c75ebb52667f094
because static PIE binaries apparently don't work very well when using gcc 7.x.
Instead of enabling static PIE support for glibc and risking runtime failures,
revert to our old situation and remove default PIE suport for gcc.
https://jira.digi.com/browse/DEL-6558
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variant is exactly the same as variant 0x02, but with a new revision
of the i.MX6UL silicon.
https://jira.digi.com/browse/DEL-6555
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This recipe adds a script and a related systemd service that
configures two GPIOs (user defined, or else platform-defaults) as
output and sets them to the appropriate value for initializing the
XBee socket:
- XBEE_SLEEP_RQ: is set low, for running the XBee
- XBEE_RESET_N: is set low and then high, to reset the XBee
The service triggers on the condition that the UART TTY device node
pointed to by variable XBEE_UART exists.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6366
In the update to thud, the recipe for this package was updated in
meta-freescale with a newer revision that, among other things, breaks
compatibility with the parameters we use to recover closed devices via USB.
Even if we change these parameters to obtain a configuration equivalent to the
one we've always had, closed devices still won't boot because the internal
logic of the tool has changed a lot.
Instead of patching the tool for this very specific use-case, revert to the
version we've been using in DEY 2.2 and 2.4.
https://jira.digi.com/browse/DEL-6520
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the linux-v4.20 recipe and use the linux-fslc kernel recipe in
meta-freescale-3rdparty instead.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Update following firmware binaries to tag r10005.1 from
qca6574au-le-2-2-1_qca_oem repo at meta_build/firmware/sdio/
in order to support fast roaming (802.11r) for the qca6564
wireless chip:
e018e7b629b055dc4616c7e88c615b41 otp30.bin
8b638fdaf21f089940d98db518323767 qwlan30.bin
d6ece5037e595000770fbbb6015c0461 utf30.bin
https://jira.digi.com/browse/DEL-6496
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update u-boot-fw-utils patches to apply on current upstream version. Remove
recipe for version 2017.09 since both U-Boot v2017.03 and v2018.03 work fine
with the newer version.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This version is only required to build U-Boot 2017.X, so select it as preferred
version only on those platforms that build this U-Boot (CC6 and CC6UL).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Most of the support has been added to the meta-freescale layer, so
substitute our recipe for a .bbappend and redefine the tasks to build
U-Boot images for our two variants (1GB and 2GB).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Every task in this recipe is already supported in the same way in the
meta-freescale layer, so just keep the .bbappend file to select SRCBRANCH and
SRCREV.
The DDR patch can be removed since that source code is now included into the
SCFW project.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This adds support for U-Boot v2018.03 for CC8X platforms only.
Create 'digi-u-boot.inc' with the common definitions for both v2017.03
and v2018.03.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Collects following changes:
- fix compatible string parsing: Only first compatible string
was being parsed from "/proc/device-tree/compatible"
while looking the device the application is running on.
https://jira.digi.com/browse/DEL-6436
Signed-off-by: Hector Bujanda <hector.bujanda@digi.com>
Add kernel module parameter to enable/disable the p2p interface.
By default p2p interface is disabled.
https://jira.digi.com/browse/DEL-6503
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The naming of branches in the qcacld repository is now in the qca65x4
namespace.
Also, the qca6564/master branch now does not hardcode the TX MCS to 0 as
this change should only apply to the CC6UL and not other platforms like
the CC6+.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Update file:
- fakeboar.bin (f9f8dc905be5732525e0c9e8db7822f3)
This file was generated by calibrating several CC8X SBC Pro boards and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10005.1 on
qca6574au-le-2-2-1_qca_oem repo.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Device tree files no longer have the kernel type prefixed to their name, so the
trustfence_sign() function must be updated to reflect this change or else
errors will occur.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This version supports OpenSSL v1.1.0 by default, which is used in DEY 2.6.
Trying to build older versions of the package will result in failures, so
remove support for said versions entirely.
Our patches apply cleanly except for the hab4_pki_tree.sh automation patch,
which needs a small tweak so it can get applied over the latest version of the
script.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Gabriel Valcazar
Javier Viguera
Arturo Buzarra
Gonzalo Ruiz
Francisco Gil
Hector Bujanda
Hector Palacios
Jose Diaz de Grenu
Alex Gonzalez
Mike Engel