Since our recipes handle native builds differently, port the latest version
of the recipes from meta-freescale to our layer while keeping our
customizations. Use the same revision for all platforms.
Adapt patches for lf-6.6.23-2.0.0 release and add the "Upstream-Status" tag to
them to avoid QA errors.
For now, use the imx-boot recipe from meta-freescale, but there's a chance we
might need to port the version of the recipe in meta-imx.
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The recipe for 4.2.0.imx has been upstreamed, so merge both of our .bb files
for 4.0.0.imx and 4.2.0.imx into a single .bbappend file. Adapt our patches to
support the ccimx93 and ccimx91, and while at it, add the "Upstream-Status"
tag to them to avoid QA errors
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Back in Yocto 4.0, we applied some imx recipe changes exclusively for the
ccimx93 from meta-imx's rel_imx_6.1.55_2.2.0 tag, but now these changes have
been upstreamed in the meta-freescale scarthgap branch. Since there currently
isn't an NXP BSP based on scarthgap, make all platforms use the upstreamed
versions of the recipes, which are the same versions or newer as the ones
available in meta-imx
Remove the recipes for:
* firmware-ele-imx
* gstreamer1.0-plugins-bad
* gstreamer1.0-plugins-base
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-good
* gstreamer1.0-plugins-ugly
* gstreamer1.0
* imx-atf
* imx-boot-firmware-files
* imx-codec
* imx-g2d-samples
* imx-m33-demos
* imx-m4-demos
* imx-m7-demos
* imx-parser
* imx-pxp-g2d
* libdrm
* linux-imx-headers
* optee-test
* wayland
* wayland-protocols
* weston
* xwayland
Apply these changes:
* Remove ccimx93-exclusive changes in gstreamer1.0-meta-base
* Modify imx-gst1.0-plugin bbappend so the upstream version is used in all
platforms
* Remove imx-alsa-plugins bbappend so the upstream version is used in all
platforms
* Remove firmware-nxp-wifi bbappend since the files we need to install seem
to already be included in the meta-freescale recipe
* Remove imx-test and imx-lib bbappends since our custom changes have
already been included in the meta-freescale recipes
https://onedigi.atlassian.net/browse/DEL-9011https://onedigi.atlassian.net/browse/DEL-9081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
* meta-ml was renamed to meta-imx-ml, and its BBFILE_COLLECTIONS was renamed to
imx-machine-learning
* meta-st-stm32mpu-ai was renamed to meta-st-x-linux-ai
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Starting in poky commit 8791c77a4098d62080ecad09d94718eccd7f1a47, there is
now a check to make sure TEMPLATECONF follows specific rules. If we don't abide
by them, an error will occur when creating a project with our mkproject.sh
script. Move the templates to the place they're supposed to be in and reflect
the change in mkproject.sh.
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The SCP firmware introduces too much verbosity (with
timestamp included) in the middle of the boot log
between the TF-A and U-Boot.
Reduce the log and remove compiler flags for errors
on unused variables (banner strings).
This removes the following messages from SCP firmware:
[ 0.000000] SCP-firmware v2.12.0-dev
[ 0.000000]
[ 0.000000] [FWK] Module initialization complete!
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ST_OPTEE_DEBUG_TRACE is set to 0 if ST_DEBUG_TRACE is set to 0.
However, on the optee source code, if ST_OPTEE_DEBUG_TRACE=0 the
log level is automatically set to 3 (INFO) resulting in a very
verbose optee log.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The ccimx91 is a headless platform. Disabling those distro features
prevents building/installing packages that are useless (e.g. gstreamer)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit changes the linux and recovery UUID when booting
the system in single mode.
https://onedigi.atlassian.net/browse/DEL-9244
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Some settings were incorrectly set. Align the card settings with the
same values used in our other platforms.
https://onedigi.atlassian.net/browse/DEL-8703
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
These are files for programming images with STM32CubeProgrammer tool. We don't
use the tool or the files. Disable the task to avoid build warnings, just like
we do for the ccmp1 platforms.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of manually disabling the task, use the ENABLE_FLASHLAYOUT_CONFIG
variable which is meant for that exact purpose.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This removes the psplash package from "core-image" images, which
prevents this failure onn boot:
[FAILED] Failed to start Start psplash boot splash screen.
psplash[454]: Error opening /dev/fb0
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Based on the environment variable emulate-cc91:
* Limit the ram memory to 512MB
* Enable the overlay _ov_som_emulate-ccimx91_ccimx93.dtbo
* Disable the npu node
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit adds the initramfs into the FIT recovery
image. If the RAM disk image is included in the FIT
image we need to create a initramfs file that doesn't
include the u-boot header, because the FIT descriptor
contains all the necessary information to use the
initramfs file.
https://onedigi.atlassian.net/browse/DEL-9168
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
When EXTRA_IMAGE_FEATURES += "overlayfs-etc" is added these
configurations are needed to compile. They are provided with
the default configuration to work with our software.
https://onedigi.atlassian.net/browse/DEL-9186
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
DEY generates the ccmp25 boot artifacts on subdirectories of the main
deploy folder. The firmware installation script expects to have them on
the deploy directory, so create the proper symlinks.
https://onedigi.atlassian.net/browse/DEL-9120
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Both CC93 and CCMP2 store the environment at the end of BOOT1 partition
and the redundant environment at the end of BOOT2 partition. Reuse the
'fw_env.config' file defined for CC93 for both platforms, and also include
CC91 in the process.
https://onedigi.atlassian.net/browse/DEL-9119
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
In CCMP2 the HWID is stored in 3 consecutive fuse words, now the third word has
the following scheme:
| 31..18 | 17 | 16 |15..12| 11..7 |6..3| 2..0 |
+--------+----+-------+------+---------+----+------+
| -- | BT | Wi-Fi | RAM | Variant | HV | Cert |
+--------+----+-------+------+---------+----+------+
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The main recipe already contains this file on the SRC_URI.
No need to append for every platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add support based on v6.1.28 kernel version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on STM release openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add open-source implementation of the OpenGL API support based on v23.0.3
version from STM release openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add GPU support based on v6.4.15 version from STM release
openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on v2.8 version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on v3.19.0 version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add initial support cloned from ccmp15, based on v2022.10 from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
When TrustFence is enabled, use the HUK programmed on the OTP
bits for the ccmp15 platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9121
When running the installation script on variants with larger NANDs, two of the
script's commands take longer than our intended timeouts under specific
circumstances:
* When the variant has a NAND with 512 MiB or more and singlemtdsys is set
to "yes", running ubivolscipt takes longer than our 10 second timeout.
The larger the NAND storage size, the longer this command takes.
* When the variant has a 1 GiB NAND, singlemtdsys is set to "yes" and
dualboot is set to "no", the update of the recovery UBI volume takes
longer than our 15 second timeout.
In both of these cases, the script fails and the installation process cannot
continue. Apply the following changes to prevent this:
* Increase the ubivolscript timeout from 10 seconds to 30
* Increase the recovery update timeout from 15 seconds to 20
Also, remove the command immediately before ubivolscript is run, since said
command is already being run at the beginning of ubivolscript.
https://onedigi.atlassian.net/browse/DEL-9097
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
By default, the secure storage path in the REE is "/var/lib/tee". It is
part of the rootfs, and thus, it gets lost on a firmware update.
This commit changes that path to a different partition "/mnt/data/tee"
when Trustfence file-based encryption is enabled.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Building Optee trusted applications (TA) depends on optee_client and the TA
devkit provided by optee_os. Our toolchain provides those dependencies, but
the SDK script which configures the environment for standalone building,
is not configuring some variables needed to build trusted applications.
This commit extends the SDK environment script to allow building TAs.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Occassionally, the loading the WiFi driver might fail, because of the
MMC node was not correctly initialized.
Fix that by rebinding the MMC node. This fix implements a similar workaround
as in c30b947408.
https://onedigi.atlassian.net/browse/DEL-9083
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
One of the conditions used to determine the U-Boot file was missing its
terminator, breaking the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 26dc437a25)
On devices with NAND as storage media, a post install script
modifies the fw_env.config file basing on the NAND geometry.
This only happens once after deployment, typically on production
environments. If the power is removed soon after the post install
script runs (which is a normal procedure on manufacturing
environments), there are chances that pending file system
operations have not been flushed, which may occasionally lead
to the fw_env.config file end up empty on the next reboot.
This commit adds a sync at the end of the post-install script
to guarantee the changes are written to the file system.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9059
There is a corner case that wasn't cover by the script, if you
use the script using a -k -t the "-t" would be the name of the
dek.bin.
This new implementation solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
By default is trying to install an artifact imx-boot--<platform>
if trustfence is not enabled.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Some variables in the script belong to u-boot, not to the shell
running the script. Escape those variables so the shell does not
expand them.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit removes the Cortex-M4 overlay because the M4 has
been enabled now in the DTSI file.
https://onedigi.atlassian.net/browse/DEL-9056
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The patches have been backported from the lf-6.1.36-2.1.0 release of
imx-mkimage.
https://onedigi.atlassian.net/browse/DUB-1081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The patches have been backported from the lf-6.1.36-2.1.0 release of
imx-mkimage.
https://onedigi.atlassian.net/browse/DUB-1081
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit adds some basic TSN support to DEY.
It includes the kernel configuration fragment with
the IEEE 802.1 support and the some user space tools
necessary to configure the network.
https://onedigi.atlassian.net/browse/DEL-9026
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The command trustfence update doesn't require the partition argument.
Besides of that, remove extra fi on the cc8m platforms.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
* Move Digi code out of the upstream files to minimize conflicts in
version migrations.
* Remove all the TEE client copied code and use the libteeclient library.
* Some fixes in the Optee-based environment encryption
* Some simplifications in CAAM-based environment encryption.
https://onedigi.atlassian.net/browse/DUB-1079
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the moment, this overlay adds RTC calibration to compensate
the drift observed in the 32kHz input frequency of hardware
version 1 of the SOM.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-8987
Update BDF file used on CC8MN and CC8MM with a new calibration
(GOLDEN3) to obtain a flatter frequency response and a better EVM
performance.
Reference calibration file is obtained from 'qca6574au-le-2-2-2_qca_oem'
repo at tag 'r00005.1' under path
'wlanfw/cnss_proc/wlan/fw/target/sdio_dst/qc6174/bdwlan30.bin'
(MD5SUM: 8a40d95698825e1718bee640b1f7982a).
Target output powers tables and CTL tables remain intact.
Changes required to pass the EN 300 328 V2.2.2 blocking test also remain
intact.
New BDF file:
- bdwlan30_US.bin (86180198440e6ab53734aabf0112c6ba)
https://onedigi.atlassian.net/browse/DEL-9001
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit adds RT functionality to CCMP1. The patches
have been extracted from STM RT expansion package and
includes the maineline RT patches and the STM RT driver
patches and RT Kernel defconfig changes.
https://onedigi.atlassian.net/browse/DEL-8880
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
This commit adds RT functionality to the CCiMX93
platform. The patches have been extracted from the
NXP real time edge BSP and include the maineline RT
patches and the NXP RT driver patches and RT Kernel
defconfig changes.
https://onedigi.atlassian.net/browse/DEL-8881
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Use the generic sys class to check if a mtd device is attached.
The virtual node may not be present in some kernel versions.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit fixes u-boot Trustfence naming for signed and
encrypted images used in the installation script removing
the a duplicated dash in the u-boot name.
https://onedigi.atlassian.net/browse/DEL-8271
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Optee-client provides the TEE Client API as defined by the GlobalPlatform TEE standard.
It is required to communicate with a Trusted Application (TA) running in a Trusted OS.
https://onedigi.atlassian.net/browse/DEL-8970
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Several things were wrong after the latest update to version 4.0: the
tee-supplicant path, some settings in the systemd unit, etc.
This commit fixes the installation so the optee test suite completes again.
https://onedigi.atlassian.net/browse/DEL-8989
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit fixes the set_fip_sign_key() function to match the new keys format
where there is a key_pass file for each key, no longer needing to search with
the key index.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes a race condition where, if you have an existing PKI tree with
the new format (one key_pass file for each key), the script detects that the
PKI tree is incomplete because it is always trying to find the key_pass.txt
file with the old format. This commit adds an additional validation step to
verify the new keys format.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add a check on the existence of the "temp-fitimg-loaded" environment
variable before setting it. It is needed, as with encrypted FIT images,
we need to decrypt them before accessing the boot script. In such cases,
u-boot sets that variable to "no" so the boot script does not override it,
and the FIT image is loaded again before the final boot to the OS.
https://onedigi.atlassian.net/browse/DEL-8945
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The signing tools have a dependency of libQt5Core.so.5, which implies that this
library must to be installed on the native PC. This commit includes all the
required shared libraries for the signing tools inside the own package to avoid
external dependencies. With this change there is not needed any more the qtbase
dependency at build time.
Package version has been bumped to 1.2.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the set_fip_sign_key() function to match the new keys format
where there is a key_pass file for each key, no longer needing to search with
the key index.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes a race condition where, if you have an existing PKI tree with
the new format (one key_pass file for each key), the script detects that the
PKI tree is incomplete because it is always trying to find the key_pass.txt
file with the old format. This commit adds an additional validation step to
verify the new keys format.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
- For Qualcomm QCA65x4 platforms:
Add support to create the 'World' board data file for the QCA65x4 Wi-Fi
chip to operate on World regulatory domain.
Kernel wireless driver already supports selecting the correct file based
on the configured Regulatory Domain via Kernel command line argument
'wlan.regdmn', which allows the following parameters:
* "US", for U.S.A. (default)
* "World", for worldwide
- For Murata type2AE platforms:
Add World CLM blob file for the wireless interface and JRL hcd file for
the Bluetooth interface. Also add the autocountry ininitialization script
and systemd service.
World CLM blob file:
- cyfmac4373-sdio_World.clm_blob (1abe7f3fa86d4123b0586cbbf0ec91ac)
Kernel wireless and bluetooth drivers already support selecting the correct
files based on the configured Regulatory Domain via Kernel command line
arguments 'brcmfmac.regdmn' and 'btbcm.regdmn' respectively, which allow the
following parameters:
'brcmfmac.regdmn':
* "US", for U.S.A. (default)
* "World", for worldwide
'btbcm.regdmn':
* "FCC.CE", for U.S.A., Europe and the rest of the world (default)
* "JRL", for Japan
https://onedigi.atlassian.net/browse/DEL-8905
Co-authored-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Different mechanisms are used to sign FIT images on the ccmp1 platforms and the
ccimx93, and we manage each mechanism via a different variable. The variable
names don't really reflect which platform they affect, which makes maintenance
harder.
Rename the variables so that it's easier to identify the platforms/vendors they
affect:
* Replace TRUSTFENCE_FIT_IMG with TRUSTFENCE_SIGN_FIT_STM
* Replace TRUSTFENCE_SIGN_FIT_ARTIFACT with TRUSTFENCE_SIGN_FIT_NXP
Don't rename TRUSTFENCE_FIT_IMG_SIGN_KEYNAME
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Unless we have a use case in which we need to apply these fragments separately,
we can merge them both into a single fragment.
https://onedigi.atlassian.net/browse/DEL-8946
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This logic was fixed in commit e915a14b4b, so we
no longer have to manually copy the bootscript to generate FIT images.
https://onedigi.atlassian.net/browse/DEL-8946
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
We rely on FIT support to implement boot artifact authentication on ccmp1
platforms, but our implementation made it impossible to enable FIT support
outside of the context of Trustfence/secure boot.
Change this so that it's possible to enable FIT support without having to sign
the FIT artifacts. Also, modify the linux-dey 5.15 recipe so that the U-Boot
DTBs with signatures get copied only when FIT signing is enabled.
https://onedigi.atlassian.net/browse/DEL-8946
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates the required firmware binaries for Bluetooth and Wireless
interfaces, hostapd and wpa_supplicant recipes based on the Cypress Linux WiFi
Driver (FMAC) release v5.15.58-2023_1128 (Wireless firmware v13.10.246.334).
This change also includes a custom defconfig file for the hostapd and
wpa_supplicant recipes including the changes from the patches and the Digi
customizations.
Also are updated the Murata firmware repositories to match with the latest
Murata release imx-kirkstone-hedorah_r1.0, which is based in the same Cypress
Linux Wifi Driver release v5.15.58-2023_1128.
https://onedigi.atlassian.net/browse/DEL-8667
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The standard string split() function does not support splitting a string
by spaces but preserving quoted strings, so it does not work for build
options disabling functionality, as they have this format:
"# CONFIG_OPTION is not set"
On the other hand, the "shlex" module provides a split function that
allows splitting strings by spaces and, at the same time, preserves
quoted strings.
In Trustfence, we need this functionality to disable default options that
would allow the booting of non-authenticated images.
https://onedigi.atlassian.net/browse/DEL-8704
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The script to sign the boot artifacts lacked the support to configure the
revocation mask. The at-the-moment supported platforms did not need it,
but the ccimx93 does need it, so implement it in this commit.
https://onedigi.atlassian.net/browse/DEL-8704
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With the introduction of the ccimx93 support in the following commits, the
srktool parameters not only differ for HAB/AHAB devices but also between
devices using AHAB (for example, different parameters for ccimx8x and
ccimx93). Thus, move this information to the platform-specific data table.
https://onedigi.atlassian.net/browse/DEL-8704
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It is a cosmetic change, as there is no change in functionality, but
convert the if..elif..fi structure to a table with the platform-specific
data, so it's easier to maintain and extend.
https://onedigi.atlassian.net/browse/DEL-8704
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
expand the docker defconfig excerpt to add more default options, as some
of them might be enable in some platform defconfigs but not in other ones,
so just set all of them, as it is safe, and nothing happens if they are
already set in the original default defconfig.
To check if all LXC/docker options are enabled for a kernel,
run lxc-checkconfig in the system.
https://onedigi.atlassian.net/browse/DEL-8924
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
When we use a fitImage kernel type, all the boot artifacts are inside the
FIT image, so there is no need to add them to the boot image additionally.
We were using TRUSTFENCE_FIT_IMG to do this filtering, which uses
a fitImage kernel type underneath. This commit uses KERNEL_IMAGETYPE
instead, as this way, we can use kernel FIT images out of Trustfence and
still prevent polluting the boot images with not-needed artifacts.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Other recipes may access SYSROOT_DIRS content by adding a dependence
on do_populate_sysroot.
We need this specific directory for the kernel fitImage support.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This update fixes an initialization issue with devices without HWID programmed.
https://onedigi.atlassian.net/browse/DUB-1066
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes a build issue when this script is installed but not shipped
in the u-boot-tools package.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Not only install the US but all the FW files.
Apart of that, some scripts need a little adjustement such as:
* Modify the BT baudrate to 3Mbps for EU power configuration, as it is the
baudrate used by the btnxpuart driver.
* Replace the way to reset the interface on each hcitool command to
avoid missleading BT behaviour.
https://onedigi.atlassian.net/browse/DEL-8458
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This commit implements the support to sign the different memory configurations for
the CCMP1 platforms, when trustfence is enabled, using FIT images.
https://onedigi.atlassian.net/browse/DEL-8752
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit implements the support to allow different memory configurations for
the CCMP1 platforms, adding support to 512MB and 1GB memory variants for the CCMP15.
https://onedigi.atlassian.net/browse/DEL-8752
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Command 'bootz' allows boot unsigned Linux zImages, so disable it when secure
boot is enabled using FIT images.
https://onedigi.atlassian.net/browse/DEL-8769
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Gabriel Valcazar
Javier Viguera
Arturo Buzarra
Francisco Gil
Hector Palacios
Mike Engel
Isaac Hermida
Gonzalo Ruiz