Just add the following to the conf/local.conf file:
MACHINEOVERRIDES .= ":use-mainline-bsp"
The defconfig is the mainline imx_v6_v7_defconfig.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
(cherry picked from commit 4d35d15fee)
Currently the contents of FILESEXTRAPATHS and the actual paths being used for
the patch files are not aligned. That generates the following WARNINGs:
imx-gst1.0-plugin_4.3.4.bb: Unable to get checksum for imx-gst1.0-plugin SRC_URI entry 0001-gstimxv4l2-map-dev-video1-to-dev-fb0.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
kernel-module-imx-gpu-viv_5.0.11.p8.6+fslc.bb: Unable to get checksum for kernel-module-imx-gpu-viv SRC_URI entry 0001-mxc-gpu-use-recommended-values-for-minimum-GPU-frequ.patch: file could not be found
Also, those patches are not being applied.
This patch fixes FILESEXTRAPATHS to contain the actual paths being used.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This way, customers are less likely to flash the plain u-boot by accident
instead of imx-boot. Also, have the imx-boot recipe look for the u-boot files
in the imx-boot-tools directory.
https://jira.digi.com/browse/DEL-6185
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
During the merge of the maintainance branch and the manual revert of
some recipes, these were forgotten.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Digi Embedded Yocto 2.4-r2.4-beta
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We have seen errors when verifying the rootfs update on 2 GiB variants. Forcing
otf-update prevents these errors from happening.
https://jira.digi.com/browse/DUB-855
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, make the script recognize the different SOM variants.
https://jira.digi.com/browse/DEL-6175
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Since we were modifying UBOOT_SYMLINK for the ccimx8x, we were generating
u-boot symlinks with imx-boot names. This also caused the imx-boot recipe to
fail during compilation, because it couldn't find the old UBOOT_SYMLINK that
we replaced.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This allows for other platforms to use different bootloaders (like imx-boot),
while leaving the default behaviour intact.
https://jira.digi.com/browse/DEL-6159
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The module was being loaded by the default udev rules. With this new rule, the
module will be loaded with our custom qualcomm.sh script.
https://jira.digi.com/browse/DEL-6067
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The module's sources are now obtained from the kernel and two of our patches
aren't needed anymore.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This way, other recipes (like the ones for kernel modules) can re-use the
sources if needed.
https://jira.digi.com/browse/DEL-6115
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Some overrides that were missing (imxgpu, imxdpublit) are needed for certain
packages to build.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also add gtk3+ and clutter demos that depend on wayland since they are also
included in NXP's images.
https://jira.digi.com/browse/DEL-6104
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit a2a8491140)
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Since this binary (u-boot-atf.bin) wasn't being deleted, the mkimage makefile
was using the one from the previous iteration, causing the 1GB imx-boot to
contain the 2GB U-Boot.
https://jira.digi.com/browse/DEL-6094
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This firmware was built using commit 9a6f1cbba2f49d2284c4211688d3cdd12fc67eca
in our cc8x-scfw repo.
https://jira.digi.com/browse/CC8X-149
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package includes applications to:
- Update the MCA firmware
- Manage different MCA settings
- Configure the tamper settings
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is our new Linux branch based on the beta 2 BSP for i.MX8 QXP
https://jira.digi.com/browse/DEL-6084
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, move all of the recipe's patches from the .bbappend file to the .bb file,
because the .bb file's modifications depend greatly on said patches.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.
The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:
* Support for our platform (based on the mx8qxpa0, which uses A0-specific
parameters for mkimage and appends the DCD explicitly)
* Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
string per platform; so the compile, install and deploy functions had to
be tweaked to build both 1GB and 2GB variants for our platform).
Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In order for Yocto to append all the necessary firmware binaries to the U-Boot
image, this recipe needs to be up to date.
Also, remove the older hardcoded SRCREV in our .bbappend file. The file that
gets patched hasn't been modified since beta1, so our patch apllies cleanly to
beta2.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This adds and AHAB container to the QXP binaries, although according to the
makefiles in the mkimage package, it isn't used in the A0 revision of the CPU.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is needed to match U-Boot's SC API changes. Also, for now, use NXP's
A0 version of the firmware without our customizations until we have access to
the new SCFW SDK.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ATF binary's source code needs to be updated for the new U-Boot to work
properly.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates firmware binaries to tag r10004.2 from
https://stash.digi.com/scm/linux/qca6574au-le-2-2-1_qca_oem.git
and modifies the recipe to use the QCA6574 proprietary driver by default.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The boot.(ext) image class was looping over ${KERNEL_DEVICETREE}
variable which is normally the list of device tree filenames.
The loop however does not take into account the possibility that
this list of files are within a sub-folder, as it happens with
ARM64 device tree files in the kernel tree.
Use 'basename' to remove any potential subfolder on the iterations.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6060
The 5.4.37 recipe already exists on meta-freescale and the
bbappend was wrongly resetting the COMPATIBLE_MACHINE to only
the ccimx8x.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Update to newest U-Boot v2017.03
Remove the package version since it is based on a git repo and only
used natively.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot's 'dboot' command now supports uncompressing Image.gz.
This will be the default kernel image type for the CC8X.
This also changes the names of the device tree artifacts, that must be
updated on the boot script. While on it, add support for all the SOM
variants (wireless and non-wireless).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe takes a binary demo for the Cortex M4 CPU.
This is later used by imx-boot recipe to bundle it with the
bootable image for the i.MX8 (together with the SC firmware,
U-Boot, etc).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
These are required for the imx-m4-demos. The classes exist in
meta-fsl-bsp-release but will eventually be moved to meta-freescale
so, presumably, they could be removed in the future.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This was done using Excel aid sheet:
MX8QXP_LPDDR4_register_programming_aid_ValidationBoard_1.2GHz_v7_DBI_enabled.xlsx
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe builds the Device Configuration Data (DCD) that
configures DRAM controller before the bootloader.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
CC8X variants include either 1GB or 2GB DDR. This requires
different defconfig files for each possible DDR size and so,
different U-boot binary files.
https://jira.digi.com/browse/DUB-836
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
A new variable QUALCOMM_WIFI_INTERFACE allows to select between 'sdio'
(default) and 'pcie'.
Compilation flags and source files differ between the two.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The firmware-qualcomm recipe now provides the Bluetooh and WiFi firmware
for QCA6564 (CC6UL, CC6PLUS) and QCA6574 (CC8X).
The Bluetooth firmware is the same for both chip models.
Regarding the Wifi firmware:
- If using the QCA6564, the proprietary firmware is used.
- If using the QCA6574, the recipe allows to select between the proprietary
or the community driver (via QUALCOMM_WIFI_DRIVER), and will install the
associated firmware. For the community driver, the firmware files have
been copied from linux-firmware repo at SHA1 7518922bd5b9, except for
the file 'board.bin' which needs to be substituted with the proprietary
one by Qualcomm. Default, is to use the community driver.
The do_install() has been improved for re-using the variables with the list
of files.
The package has been renamed basing on the QCA_MODEL variable which can
be set per platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- This is an AARCH64 platform that requires to build "Image", so let's
change KERNEL_IMAGETYPE to a weak assignment in imx-digi-base.inc
- The device tree is inside a vendor folder.
- For the moment, this platform builds from a different branch.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
With this patch a user can provide his own kernel 'defconfig' file by:
- setting the variable KERNEL_DEFCONFIG to a custom kernel configuration
file inside the kernel repository.
- setting the variable KERNEL_DEFCONFIG to a kernel configuration file
using the full path to the file.
- clearing the variable KERNEL_DEFCONFIG and providing a kernel
configuration file in the layer (in this case the file must be named
'defconfig').
Otherwise the default platform's kernel configuration file will be taken
directly from the Linux source code tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This adds support for U-Boot v2017.03 for all platforms (including CC8X).
For legacy v2015.04:
- Renames u-boot.inc as a versioned file only for v2015.04.
- Moves boot/install scripts from versioned folder into non-versioned
folder (since the scripts remain the same between versions).
For new v2017.03:
- Re-uses poky's u-boot.inc in rocko for v2017.03
- DEY recipe re-writes the do_compile for special U-Boot configuration
required for TrustFence.
- DEY recipe appends the do_deploy, for U-Boot scripts and deploy of
special TrustFence artifacts.
- Adds u-boot-dtb.xxx to UBOOT_CONFIG, required for new U-Boots.
- Adds CC8X scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
Add initial support for Digi ConnectCore 8X SBC Express.
- ccimx6qp was used as reference machine from meta-digi.
- imx8qxpmek was used as a reference machine from meta-fsl-bsp-release.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
We are going to remove this repo, so the sources will always be fetched from
the official Microchip repo from now on.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Install crypto libraries in the rootfs so external applications can made use
of them.
Reworked first patch with all the needed port changes.
https://jira.digi.com/browse/DEL-5710
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Make SRC_URI point to Microchip's standalone repo of the cryptoauth library,
add our customization patches and modify the license variables to point to the
new Microchip license file.
https://jira.digi.com/browse/DEL-5591
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Under certain circumstances I was able to create a microSD card with
the FAT file system but corrupt partition table like this one:
Device Boot Start End Sectors Size Id Type
/dev/sdf1p1 778135908 1919645538 1141509631 544,3G 72 unknown
/dev/sdf1p2 168689522 2104717761 1936028240 923,2G 65 Novell Netware 386
/dev/sdf1p3 1869881465 3805909656 1936028192 923,2G 79 unknown
/dev/sdf1p4 2885681152 2885736650 55499 27,1M d unknown
Specifying the partition index made the install script to fail, but
not specifying it makes it work, although it also falls back to use
the first partition in the table.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
util-linux is needed as the scripts use 'hexdump'. In previous versions
of Yocto the tool from the host was used, but this has been fixed in
Yocto 2.3
Also fix the other dependencies: the -native suffix is not needed nor
correct, as the native and nativesdk classes already map packages in
the DEPENDS variable to the corresponding packages.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
The MACHINE_EXTRA_RRECOMMENDS for the ccimx6ul in meta-digi-arm contains
cryptoauthlib. If we want to use meta-digi-arm as a standalone BSP layer
we need to move the cryptoauthlib recipe to meta-digi-arm, that or not make it
a machine dependency.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
In the old u-boot-fw-utils 2016.x the function 'fw_env_close' wrote
the environment to the media. That is no longer the case, now that
function only frees the memory used, and 'fw_env_flush' is used
to write the environment.
This was causing that userspace application using this library were not
able to write changes to the environment.
https://jira.digi.com/browse/DEL-5644
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Generate and include the host tools in the SDK when Trustfence is enabled.
This makes it easier to use the standalone signing and encrypting scripts.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Bash v4.4 or higher warns when discarding NULL bytes in command substitution
output. Remove these bytes to avoid the undesired warnings.
https://jira.digi.com/browse/DEL-5588
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This allows us to save around 4MiB of space in the rootfs image.
(see commit in poky/meta 71ca295786e35b7be84bfd4bc04e0c3ec0f97cd8)
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Support for dynamic location of U-Boot environment was added in
commit 2b5017956b. This forward ports
the patch to Yocto 2.4.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5574
As a side effect, remove U-Boot entry point variable and LOADADDR
extra parameter from the kernel recipe.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5554
Some packages are not updated in meta-freescale/rocko, so we do
need to include some of these.
The patches for gstreamer in the original commit are skipped, as
poky/rocko uses a newer version.
This partially reverts commits:
* 52a10ff88d.
* b06c81b277https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All these recipes and patches are now available and maintained in the
meta-freescale layer.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Pending to update the patch for dynamic environment location in NAND.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Cryptodev has been updated to version 1.9 and the patch is no longer
needed.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This tool was only needed for old kernels, newer kernels use the hardware
random number generator themselves.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
ConnectCore 6 and ConnectCore 6 UL are now supported in kernel v4.9.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This functionality is automatically enabled for any recipe that inherits
the kernel class.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
As per Yocto 2.4, do_image_<type>[depends] has replaced IMAGE_DEPENDS_<type>.
The previous trick to propagate *boot* dependencies from *boot.[vfat|ubifs]*
is no longer needed.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
When parsing the recipe, a warning is shown because the tarball is only found
in the downloads folder. However this is expected as it cannot be distributed.
As a workaround, add the tarball to the SRC_URI variable only when Trustfence
is active. That way the warning is not shown in all other cases.
This was incorrectly removed in commit 14fc51147f.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
U-Boot has been able to boot kernel zImage for a long time so make this
the default kernel image.
For the CC6 we still want to use uImage for compatibility reasons.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5237
Prevents loading the spidev module at boot time to avoid
the undesired warning message from driver.
https://jira.digi.com/browse/DEL-4748
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit re-adds the imx-gpu-g2d recipe that was removed
from the imx-gpu-viv v6 driver.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the recipe to update the GPU driver
to the latest version.
https://jira.digi.com/browse/DEL-5234
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the recipe to update the Vivante GPU
driver to the latest version and refresh patches.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit adds the defconfig for the platform ccimx6qpsbc
to the kernel v4.9 and modifies the recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit includes ccimx6qpsbc platform in the recipe and adds
U-Boot scripts for deploying and booting the system.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add initial support for Digi's ConnectCore 6 QuadPlus SBC.
The ccimx6qp platform has the QCA6564 chip instead of the
other Atheros chips and included the Atmel ECC508A cryptographic
chip.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The patch is needed to match the API kernel changes. This fixes:
zc.c:68:44: error: passing argument 7 of 'get_user_pages_remote' from incompatible pointer type [-Werror=incompatible-pointer-types]
(unsigned long)addr, pgcount, write, 0, pg, NULL);
^~
In file included from zc.c:28:0:
kernel-source/include/linux/mm.h:1276:6: note: expected 'struct vm_area_struct **' but argument is of type 'struct page **'
long get_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm,
^~~~~~~~~~~~~~~~~~~~~
zc.c:63:8: error: too many arguments to function 'get_user_pages_remote'
ret = get_user_pages_remote(
^~~~~~~~~~~~~~~~~~~~~
In file included from zc.c:28:0:
kernel-source/include/linux/mm.h:1276:6: note: declared here
long get_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm,
^~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
https://jira.digi.com/browse/DEL-5081
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
CC6 PS_ASIC_class_1.pst MD5SUM be8766069eed652449682d9006dd6ecd
https://jira.digi.com/browse/DEL-5057
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
The current value only allows partitions of up to 8 MiB, which is not
enough for the 0x04 variant (which uses a linux partition of 24 MiB by
default).
This new value allows for up to 32 MiB (assuming 128 KiB erase block size).
Also add comments explaining the -c value and maximum partition sizes
supported.
https://jira.digi.com/browse/DEL-4971
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
After the 'ccardimx28js' platform removal, these variables and machine
features are not used anymore, so remove them.
https://jira.digi.com/browse/DEL-4771
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We need to pass different log levels depending on the message, so they
appear in the console, so generalize the 'log' function.
https://jira.digi.com/browse/DEL-4682
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
At the point this script is running from udev (the system log is not yet
available), so to avoid debug messages from qualcomm wireless module
reduce the console log level.
https://jira.digi.com/browse/DEL-4570
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is required to be able to use the whole RootFS partition which is
512 MiB in the 0x04 CC6UL SOM variant.
The old value only allowed to manage partitions of up to 256 MiB, this new
value allows for up to 1 GiB (assuming 128 KiB erase block size).
https://jira.digi.com/browse/DEL-4567
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
At the point this script is run (from udev) the system log is not yet
available, so use the kernel log buffer instead.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Use the same udev script that loads the qualcomm wireless module to
create the 'wlan1' virtual interface.
https://jira.digi.com/browse/DEL-4453
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Udev comes with a bunch of generic rules for the hardware. One of them:
/lib/udev/rules.d/80-drivers.rules
is able to load the qualcomm wireless module.
At the same time our new rule is needed, so it prepares the firmware
before the module is loaded.
Both rules running collide with following error message:
udevd[181]: '/etc/udev/scripts/qualcomm.sh' [184] terminated by signal 1 (Hangup)
So to fix this, we rename the specific rule so it's parsed later, and
then we use the hard assignation '=' instead of '+=' to override the
values that come from the previous parsed rule.
Also clean-up a bit the 'qualcomm.sh' script and the modprobe file,
given that now we know the standard drivers rule won't run for this
interface.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
NetworkManager is not able to detect and manage the wireless interface
until is actually created, so let udev load the kernel module and create
the interface on boot.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The new fw-4.bin (v3.4.0.236) with md5sum e2fc33daba2c35fe2c4f62492a44f8b6
was used to pass RED (Radio Equipment Directive) certification on the CC6
module.
https://jira.digi.com/browse/DEL-4512
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
A mechanism was introduced in U-Boot to dynamically locate the environment
copies within a NAND partition, skipping bad blocks and making full use of
the partition blocks.
To trigger this mechanism in Linux tools (fw_printenv/fw_setenv) the
configuration file /etc/fw_env.config must have both copies entries
pointing to the same offset.
This commit substitutes the hardcoded configuration file for CC6UL with a
stub and generates one on an RPM post-script basing on:
- Supplied DEY variables (with default values per platform):
- UBOOT_ENV_OFFSET: starting offset of the environment within the
partition.
- UBOOT_ENV_SIZE: size of each copy of the environment.
- UBOOT_ENV_RANGE: size in the partition that the environment copies may
occupy, starting from UBOOT_ENV_OFFSET. If undefined, the whole
partition is used.
- Calculated values:
- NAND Erase block size
- Number of blocks available for the environment copies
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4256
This library adds support to use the Atmel CryptoAuth device available
in the ConnectCore 6UL.
https://jira.digi.com/browse/DEL-4284
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This is a Consumer dual-core 1GHz, 4GB eMMC, 1GB DDR3, 0/+70C variant
without bluetooth, no wireless, no kinetis.
https://jira.digi.com/browse/DEL-4280
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Since 30c253e108 the module is compiled from a repository which already
includes the patches, so we can remove them from DEY.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds support to read the GPU reserved memory
from the DT.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3868
These new US and world board data files contain new settings updated
with the latest certification results including the 2 dB power reduction
from DVT.
md5sums:
a5635e39aaaa220094e0d07f7a4f4567 bdwlan30_US.bin
cabebad84a6afc1c2a7d795d31dda480 bdwlan30_World.bin
https://jira.digi.com/browse/CC6UL-740
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Variant 0x04 has wireless and must select the '-wb' device tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4100
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
The firmware configuration and the driver configuration are part of the
driver repository. Stop duplicating the content in meta-digi so they
are updated with the driver itself.
https://jira.digi.com/browse/DEL-4021
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- The IVT table address inside the kernel image must be aligned at 0x1000
bytes. The calculation of this offset was not working when the kernel image
size was multiple of 0x1000 bytes. In this case the IVT table was moved an
extra offset of 0x1000 bytes, causing U-Boot to fail to validate the image
as the IVT table was not in the expected location.
This fix uses the same offset calculation algorithm as U-Boot, ensuring both,
the sign script and U-Boot will look for the IVT at the same address.
https://jira.digi.com/browse/DEL-3972
Signed-off-by: David Escalona <david.escalona@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will allow to get the package from a premirror in case it is not
already downloaded in the DL_DIR.
https://jira.digi.com/browse/DEL-3051
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This allows to override the console using the local.conf.
https://jira.digi.com/browse/DEL-2856
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The main purpose is to improve our kits usability. This way users do not need
to follow the steps in the documentation to change from static to DHCP IPs.
https://jira.digi.com/browse/DEL-3821
Signed-off-by: Tatiana Leon <tatiana.leon@digi.com>
The amount of patches to this driver maintained in meta-digi is
substantial, so we are moving to a git repository release model.
https://jira.digi.com/browse/DEL-3710
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- Instead of using a different boot script when booting from linux
and from recovery, merge them into one script that checks the
boot source.
https://jira.digi.com/browse/DEL-3836
Signed-off-by: David Escalona <david.escalona@digi.com>
Seems that this is needed for the bluetooth interface to work. Without
this options, the interface is not able to initialice (hciattach command
fails).
https://jira.digi.com/browse/DEL-3855
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit adds the wireless concurrent mode as a default
configuration to the CC6UL machine.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-3818
Loading firmware by userspace helpers has been deprecated from device
managers (like udev, eudev, etc). Firmware loading is supposed to be
performed by the kernel.
This fixes the loading of an external kernel module (qualcomm wlan.ko)
that was failing to load because of a missing firmware file.
In that case the kernel was requesting the firmware load from userspace:
ar6k_wlan mmc0:0001:1: Direct firmware load for qsetup30.bin failed with error -2
ar6k_wlan mmc0:0001:1: Falling back to user helper
The device manager we are using in DEY-2.2 (eudev) does not support
firmware loading and is not giving an error return value to the kernel
either, so at one point the kernel throws an oops:
Hardware name: Freescale i.MX6 Ultralite (Device Tree)
task: 88228000 ti: 88cbe000 task.ti: 88cbe000
PC is at 0x7f183758
LR is at request_firmware+0x38/0x40
pc : [<7f183758>] lr : [<802f80bc>] psr: 600f0013
sp : 88cbfdb8 ip : 00000000 fp : 88644c00
r10: 0000dac0 r9 : 88cbfefc r8 : 0000000c
r7 : 00007d08 r6 : 88cbfde4 r5 : 88644ea2 r4 : 00000005
r3 : 88cbfde4 r2 : 00000080 r1 : 00000000 r0 : fffffff5
and the wireless driver is not loaded.
https://jira.digi.com/browse/DEL-3856
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Patches added in 'meta-swupdate' (backported from U-Boot) broke our
layer. We also had those patches, so remove them and make sure the
rest or our patches are applied after the ones from 'meta-swupdate'
by using an anonymous python function instead of appending to the
SRC_URI variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The way the kernel artifacts are generated has change as of Yocto 2.2.
Also some of the variables (e.g. KERNEL_IMAGE_SYMLINK_NAME) have changed
their default values.
Thus the trustfence_sign function needed some tweaks to continue working
properly.
https://jira.digi.com/browse/DEL-3834
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
KERNEL_IMAGE_BASE_NAME and KERNEL_IMAGE_SYMLINK_NAME default values have
changed in Yocto 2.2, so now this appended command is failing because
it's translated to:
ln -sf -4.1-r0.2-ccimx6ulstarter-20170216122147.bin ccimx6ulstarter
which fails with:
ln: invalid option -- '4'
Just remove it, because we don't need that symlink anymore. New U-Boot's
'zimage' and 'uimage' environment variables have default values ending in
'.bin' which is what Yocto provides.
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Transfer dependences from base types 'boot' and 'recovery' to the
actual image types 'boot.vfat', 'boot.ubifs', 'recovery.vfat' and
'recovery.ubifs' using IMAGE_TYPEDEP variable.
* Now the images are created in a per image recipe deploy directory
(IMGDEPLOYDIR), so use that instead of the final DEPLOY_DIR_IMAGE.
* Remove manual creation of symbolic links and let Poky create them. For
this, we need to remove the default 'rootfs' image suffix using the
imgsuffix variable flag for the corresponding do_image_* functions.
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
As of Yocto 2.2, the way to generate images has changed. Now the image
fstypes have a basetype and then conversion types that define functions
that apply sequentially.
So implement the TrustFence initramfs sign process as a conversion type
of the base initramfs type (cpio).
This fixes following build issue:
mv: cannot stat ‘dey-image-recovery-initramfs-ccimx6ulstarter-20170220152625.rootfs.cpio.gz.u-boot’
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
meta-fsl-arm is no longer used for Morty release. Now the community
support is implemented in 'meta-freescale' layer.
https://jira.digi.com/browse/DEL-3451
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new calibration settings
updated with the latest certification results.
md5sums:
bdwlan30_US.bin: f2c414adb682a8cd95e72593fad7fa08
bdwlan30_World.bin: 12e2bae1a871e2a3dfa6ded0ee675c09
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Protect the invocation of the _scan_done() callback function with the
global lock to avoid that it is called while the module is being unloaded
and the data structures have been freed.
Additionally, the commit also adds a patch to reduce the log level of the
driver that is logging some annoying messages.
https://jira.digi.com/browse/DEL-3607https://jira.digi.com/browse/DEL-3393
Signed-off-by: Pedro Perez de Heredia <pedro.perez@digi.com>
Alex Gonzalez
Jose Diaz de Grenu
Gabriel Valcazar
Hector Palacios
Gonzalo Ruiz
Hector Bujanda
Arturo Buzarra
Isaac Hermida
Javier Viguera
David Escalona
Sebastian Pastor
Francisco Gil
Mike Engel
Tatiana Leon
Alejandro Navarro
Pedro Perez de Heredia