Both boot artifacts now use the same signed label, so this commit removes
unnecessary logic and updates the UUU install script to support the new boot
artifact naming. It also fixes the detection of signed artifacts by checking
for the presence of the FIP artifact, instead of relying on a U-BOOT artifact
that does not exist on this platform.
https://onedigi.atlassian.net/browse/DEL-9442
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Assignment of variable 'force_erase' was done without escaping quotes
which led to wrong assignment and the script not forcing the erasure of
NAND partitions.
While on it, remove it from ccmp1 scripts where its use makes no sense
as the 'ubivolscript' script takes care of erasing the partitions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
(cherry picked from commit 96e1e8351d)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Assignment of variable 'force_erase' was done without escaping quotes
which led to wrong assignment and the script not forcing the erasure of
NAND partitions.
While on it, remove it from ccmp1 scripts where its use makes no sense
as the 'ubivolscript' script takes care of erasing the partitions.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Device tree overlays now have the extension 'dtso' that
distinguishes them from board 'dts' files, so there is
no need for a prefix '_ov_' to tell if a file contains
a DT overlay.
To make them shorter and easier to tell the platform they
are for, change the filename format to:
<platform-name>_<functionality>.dtso
where <platform-name> can be the name of the SOM or the
name of the DVK, so there is no need either to specify
'som' or 'board' on the filename.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Based on the boot schemes and sources supported for each platform, the boot
artifacts now include this information in their filenames. This commit updates
the filenames accordingly in several recipes.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update ccmp2 platform to use the latest U-Boot v2023.10 based on the
openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9381
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These patches were originally backported from U-Boot v2023.07, and now that
u-boot-tools is using v2024.01, they are no longer needed
https://onedigi.atlassian.net/browse/DEL-9011
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit changes the linux and recovery UUID when booting
the system in single mode.
https://onedigi.atlassian.net/browse/DEL-9244
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Based on the environment variable emulate-cc91:
* Limit the ram memory to 512MB
* Enable the overlay _ov_som_emulate-ccimx91_ccimx93.dtbo
* Disable the npu node
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
In CCMP2 the HWID is stored in 3 consecutive fuse words, now the third word has
the following scheme:
| 31..18 | 17 | 16 |15..12| 11..7 |6..3| 2..0 |
+--------+----+-------+------+---------+----+------+
| -- | BT | Wi-Fi | RAM | Variant | HV | Cert |
+--------+----+-------+------+---------+----+------+
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add initial support cloned from ccmp15, based on v2022.10 from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
When running the installation script on variants with larger NANDs, two of the
script's commands take longer than our intended timeouts under specific
circumstances:
* When the variant has a NAND with 512 MiB or more and singlemtdsys is set
to "yes", running ubivolscipt takes longer than our 10 second timeout.
The larger the NAND storage size, the longer this command takes.
* When the variant has a 1 GiB NAND, singlemtdsys is set to "yes" and
dualboot is set to "no", the update of the recovery UBI volume takes
longer than our 15 second timeout.
In both of these cases, the script fails and the installation process cannot
continue. Apply the following changes to prevent this:
* Increase the ubivolscript timeout from 10 seconds to 30
* Increase the recovery update timeout from 15 seconds to 20
Also, remove the command immediately before ubivolscript is run, since said
command is already being run at the beginning of ubivolscript.
https://onedigi.atlassian.net/browse/DEL-9097
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
One of the conditions used to determine the U-Boot file was missing its
terminator, breaking the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 26dc437a25)
There is a corner case that wasn't cover by the script, if you
use the script using a -k -t the "-t" would be the name of the
dek.bin.
This new implementation solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
By default is trying to install an artifact imx-boot--<platform>
if trustfence is not enabled.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Arturo Buzarra
Isaac Hermida
Francisco Gil
Hector Palacios
Gonzalo Ruiz
Javier Viguera
Gabriel Valcazar
Mike Engel