This commit adds the initramfs into the FIT recovery
image. If the RAM disk image is included in the FIT
image we need to create a initramfs file that doesn't
include the u-boot header, because the FIT descriptor
contains all the necessary information to use the
initramfs file.
https://onedigi.atlassian.net/browse/DEL-9168
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
When EXTRA_IMAGE_FEATURES += "overlayfs-etc" is added these
configurations are needed to compile. They are provided with
the default configuration to work with our software.
https://onedigi.atlassian.net/browse/DEL-9186
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
DEY generates the ccmp25 boot artifacts on subdirectories of the main
deploy folder. The firmware installation script expects to have them on
the deploy directory, so create the proper symlinks.
https://onedigi.atlassian.net/browse/DEL-9120
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Both CC93 and CCMP2 store the environment at the end of BOOT1 partition
and the redundant environment at the end of BOOT2 partition. Reuse the
'fw_env.config' file defined for CC93 for both platforms, and also include
CC91 in the process.
https://onedigi.atlassian.net/browse/DEL-9119
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
In CCMP2 the HWID is stored in 3 consecutive fuse words, now the third word has
the following scheme:
| 31..18 | 17 | 16 |15..12| 11..7 |6..3| 2..0 |
+--------+----+-------+------+---------+----+------+
| -- | BT | Wi-Fi | RAM | Variant | HV | Cert |
+--------+----+-------+------+---------+----+------+
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The main recipe already contains this file on the SRC_URI.
No need to append for every platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add support based on v6.1.28 kernel version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on STM release openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add open-source implementation of the OpenGL API support based on v23.0.3
version from STM release openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add GPU support based on v6.4.15 version from STM release
openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on v2.8 version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on v3.19.0 version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add initial support cloned from ccmp15, based on v2022.10 from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
When TrustFence is enabled, use the HUK programmed on the OTP
bits for the ccmp15 platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9121
When running the installation script on variants with larger NANDs, two of the
script's commands take longer than our intended timeouts under specific
circumstances:
* When the variant has a NAND with 512 MiB or more and singlemtdsys is set
to "yes", running ubivolscipt takes longer than our 10 second timeout.
The larger the NAND storage size, the longer this command takes.
* When the variant has a 1 GiB NAND, singlemtdsys is set to "yes" and
dualboot is set to "no", the update of the recovery UBI volume takes
longer than our 15 second timeout.
In both of these cases, the script fails and the installation process cannot
continue. Apply the following changes to prevent this:
* Increase the ubivolscript timeout from 10 seconds to 30
* Increase the recovery update timeout from 15 seconds to 20
Also, remove the command immediately before ubivolscript is run, since said
command is already being run at the beginning of ubivolscript.
https://onedigi.atlassian.net/browse/DEL-9097
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
By default, the secure storage path in the REE is "/var/lib/tee". It is
part of the rootfs, and thus, it gets lost on a firmware update.
This commit changes that path to a different partition "/mnt/data/tee"
when Trustfence file-based encryption is enabled.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Building Optee trusted applications (TA) depends on optee_client and the TA
devkit provided by optee_os. Our toolchain provides those dependencies, but
the SDK script which configures the environment for standalone building,
is not configuring some variables needed to build trusted applications.
This commit extends the SDK environment script to allow building TAs.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Occassionally, the loading the WiFi driver might fail, because of the
MMC node was not correctly initialized.
Fix that by rebinding the MMC node. This fix implements a similar workaround
as in c30b947408.
https://onedigi.atlassian.net/browse/DEL-9083
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
One of the conditions used to determine the U-Boot file was missing its
terminator, breaking the script.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
(cherry picked from commit 26dc437a25)
On devices with NAND as storage media, a post install script
modifies the fw_env.config file basing on the NAND geometry.
This only happens once after deployment, typically on production
environments. If the power is removed soon after the post install
script runs (which is a normal procedure on manufacturing
environments), there are chances that pending file system
operations have not been flushed, which may occasionally lead
to the fw_env.config file end up empty on the next reboot.
This commit adds a sync at the end of the post-install script
to guarantee the changes are written to the file system.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9059
There is a corner case that wasn't cover by the script, if you
use the script using a -k -t the "-t" would be the name of the
dek.bin.
This new implementation solves the issue.
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Isaac Hermida
Arturo Buzarra
Mike Engel
Javier Viguera
Francisco Gil
Gonzalo Ruiz
Hector Palacios
Gabriel Valcazar