This commit adds the initramfs into the FIT recovery
image. If the RAM disk image is included in the FIT
image we need to create a initramfs file that doesn't
include the u-boot header, because the FIT descriptor
contains all the necessary information to use the
initramfs file.
https://onedigi.atlassian.net/browse/DEL-9168
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The bluetooth daemon does not need the interface to exist before being
executed. We configure the daemon with AutoEnable=true, which will enable
adapters present on start or that appear later on.
On shutdown, systemd stops services in the opposite order to the boot,
so configuring the driver load service after the bluetooth service,
ensures that on shutdown the driver is unloaded before the bluetooth
daemon is stopped.
The btnxpuart driver needs this order, to prevent a module unload failure
on system reboot/poweroff.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
When EXTRA_IMAGE_FEATURES += "overlayfs-etc" is added these
configurations are needed to compile. They are provided with
the default configuration to work with our software.
https://onedigi.atlassian.net/browse/DEL-9186
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
This commit enables SWU image authentication when TrustFence
is enabled instead of when signing of images is enabled.
This allows the system to authenticate SWU images on images that
have been externally signed.
https://onedigi.atlassian.net/browse/DEL-8891
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
DEY generates the ccmp25 boot artifacts on subdirectories of the main
deploy folder. The firmware installation script expects to have them on
the deploy directory, so create the proper symlinks.
https://onedigi.atlassian.net/browse/DEL-9120
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Both CC93 and CCMP2 store the environment at the end of BOOT1 partition
and the redundant environment at the end of BOOT2 partition. Reuse the
'fw_env.config' file defined for CC93 for both platforms, and also include
CC91 in the process.
https://onedigi.atlassian.net/browse/DEL-9119
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
In CCMP2 the HWID is stored in 3 consecutive fuse words, now the third word has
the following scheme:
| 31..18 | 17 | 16 |15..12| 11..7 |6..3| 2..0 |
+--------+----+-------+------+---------+----+------+
| -- | BT | Wi-Fi | RAM | Variant | HV | Cert |
+--------+----+-------+------+---------+----+------+
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The main recipe already contains this file on the SRC_URI.
No need to append for every platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Add support based on v6.1.28 kernel version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on STM release openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add open-source implementation of the OpenGL API support based on v23.0.3
version from STM release openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add GPU support based on v6.4.15 version from STM release
openstlinux-6.1-yocto-mickledore-mpu-v24.06.26.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on v2.8 version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support based on v3.19.0 version from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add initial support cloned from ccmp15, based on v2022.10 from STM release
openstlinux-6.1-yocto-mickledore-mp2-v23.12.06.
https://onedigi.atlassian.net/browse/DEL-8995
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commits adds the CCMX91 platform to the DEY
build system. Furthermore, it creates generic ccimx9
support to be used for the CCiMX91 and CCiMX93
platform.
https://onedigi.atlassian.net/browse/DEL-9106
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
When TrustFence is enabled, use the HUK programmed on the OTP
bits for the ccmp15 platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9121
There is a harmless error when restoring alsa profiles, as it also
attempts to restore UCM profiles.
Since we do not include UCM profiles for our sound cards, skip it.
https://onedigi.atlassian.net/browse/DEL-9066
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
In legacy NAND platforms like the ccimx6ul, it's possible to use a single-MTD
configuration with dualboot disabled, which allows access to the functionality
provided by the recovery partition. However, the partition encryption feature
requires a multi-MTD configuation, so said feature shouldn't be accessible in
this case.
Prevent access to partition encryption in a single-MTD system by:
* Adding the "system" partition to the partition blacklist in both the
recovery-utils library and the recovery initscript.
* Checking the "singlemtdsys" environment variable before using any
functionality related to partition encryption.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Currently, when wiping the update volume via the recovery partition on a
ccimx6ul with singlemtdsys enabled, the procedure fails with this error:
[RECOVERY] Starting recovery...
[RECOVERY] Wipe 'update' partition requested
[RECOVERY] Formatting 'update' ubi volume
ubi0 error: ubi_open_volume.part.0: cannot open device 0, volume 3, error -16
ubiupdatevol: error!: cannot open "/dev/ubi0_3"
error 16 (Device or resource busy)
This is because the logic used to unmount a volume before formatting it is
expecting this entry format when running "mount":
ubi0:update on /mnt/update type ubifs
While this is the format of the "mount" output in userspace for the rootfs
volume, other trivial volumes have this format instead:
ubi0_3 on /mnt/update type ubifs
Adapt the logic to this format so that the "update" volume wipe procedure can
take place.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When running the installation script on variants with larger NANDs, two of the
script's commands take longer than our intended timeouts under specific
circumstances:
* When the variant has a NAND with 512 MiB or more and singlemtdsys is set
to "yes", running ubivolscipt takes longer than our 10 second timeout.
The larger the NAND storage size, the longer this command takes.
* When the variant has a 1 GiB NAND, singlemtdsys is set to "yes" and
dualboot is set to "no", the update of the recovery UBI volume takes
longer than our 15 second timeout.
In both of these cases, the script fails and the installation process cannot
continue. Apply the following changes to prevent this:
* Increase the ubivolscript timeout from 10 seconds to 30
* Increase the recovery update timeout from 15 seconds to 20
Also, remove the command immediately before ubivolscript is run, since said
command is already being run at the beginning of ubivolscript.
https://onedigi.atlassian.net/browse/DEL-9097
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Mike Engel
Javier Viguera
Francisco Gil
Hector Palacios
Arturo Buzarra
Gonzalo Ruiz
Isaac Hermida
Gabriel Valcazar