The LPDDR4 retention code is executed as part of the suspend/resume process.
When resuming, this code writes to a register that doesn't exist on the
i.MX8MN, causing the system to freeze before control is returned to Linux.
Add a patch that introduces a compile-time check for the SoC type to avoid
performing the write operation on the i.MX8MN.
https://jira.digi.com/browse/DEL-6914
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The Cortex-M7 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Nano DVK board to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
For the i.MX8M processors, the do_deploy support is provided by
the upstream recipe firmware-imx-8m.
https://jira.digi.com/browse/DEL-6911
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a332ff445f)
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This imx-seco recipe manages now the NXP IMX SECO firmware, it was removed
from the firmware-imx recipe.
https://jira.digi.com/browse/DEL-6823
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Digi Embedded Yocto 2.6-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (e1db4a300b58776f8abd8588beadc09e)
This file was generated by calibrating several CC8X SOMs and SBCs and
merging their resulting BDF files into a Golden file.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (3e558869e3943da08899abd881455bc6)
This file was generated by calibrating several CC8X SOMs and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Latest release r10007.1 updates the following files from qca6574au-le-2-2-1_qca_oem
repo at meta_build/firmware/pcie/:
- qwlan30.bin -> qwlan30.bin (60ac4486fba393294b590f86117f5539)
- utf30.bin -> utf.bin (c15794509d8a8435d4244fea699d99b3)
and the following files from meta_build/firmware/sdio/:
- qwlan30.bin -> qwlan30.bin (4421b30ca259ab73bbfa79df807e0b47)
- utf30.bin -> utf30.bin (b2651762aa1d620349593905efab326b)
Update Bluetooth firmware from qca6574au-le-2-2-1_qca_oem repo at
cnss_proc_1/btfm_proc/bt/wcss/bsp/rom/build/SCAQBAF/Test_Files/Linux/
- rampatch_tlv_3.2.tlv -> rampatch_tlv_3.2.tlv (72d28614afd0abe5846c1758099282e3)
- nvm_tlv_3.2.bin -> nvm_tlv_3.2.bin (3de46ea023570b86cabb9502b92a1fed)
Note: nvm_tlv_3.2.bin based on original md5sum
a97cdfe80e8109cf3574f74cd3c73fc7 but changed byte at
offset 0x36 from 0x82 to 0x02 (IBS).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6725
Remove our .bbappend, which was wrongly making this recipe compatible with the
imx8. Directly port NXP's recipe (v5.4.39), which is newer than the one in
meta-freescale (v5.4.38).
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Change the license type from "MIT" to "Proprietary". This change was taken
from the imx-sc-firmware recipe.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The 'soc_type' variable was already set by fastboot to "imx8qxp"
so the U-Boot board code that was setting this to just "8qxp" has
been changed to set it to "imx8qxp".
Update the scripts accordingly.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-901
This commit fixes two issues:
- Comparison clause uses only one equal sign
- Fix soc_type for Dual variants because the supported soc types
for the imx8 processor are: 8qm, 8qxp, and 8dx
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These images were broken in many ways, including ethernet not working and Linux
not booting. For now, revert back to the build command that was used in
DEY-2.6-r1.
https://jira.digi.com/browse/DEL-6677
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
After the recent changes to generate the bootable artifacts, these are
now formed using the ${MACHINE} variable rather than the string in
${UBOOT_CONFIG} array, so the underscores must be changed with dashes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The existing loops were iterating through all RAM_CONFIGS, but
they must only iterate over those that match the RAM size on the
platform's UBOOT_CONFIG.
This commit adds a Python class 'boot-artifacts' to get the list of matching
combinations of RAM_CONFIGS and UBOOT_CONFIG so that the iteration
is easier to do than nesting loops inside one another.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
The recipe was creating a variable with the value of another one from
the main recipe, just to refer to the bootable artifact prefix.
We can now use instead the new UBOOT_PREFIX variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Similar to the way the u-boot recipe does, create a symlink to the default
bootable artifact.
Since they are overwritten on every loop, this requires that the default
RAM configuration is set the last on the list of RAM_CONFIGS (same
convention than the one used on UBOOT_CONFIGS).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the rework to support variants, the machine name (actually the
UBOOT_CONFIG) was removed from the filename. Re-add it using
${MACHINE_NAME} which is more appropriate than the ${UBOOT_CONFIG} which
contains the RAM size (now present in ${ramc}).
While on it, remove one of the two symlinks on DEPLOYDIR. Only one makes
sense.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
Now the U-Boot binaries contain the RAM frequency and bus width, not just
only the RAM size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
There are several U-Boot binaries, depending on RAM size, at the moment:
- u-boot.bin-ccimx8x_sbc_pro512MB
- u-boot.bin-ccimx8x_sbc_pro1GB
- u-boot.bin-ccimx8x_sbc_pro2GB
and several SCFW files, depending on frequency, size, bus width, at the
moment:
- scfw_tcm.bin-1.2GHz_512B_16bit
- scfw_tcm.bin-1.2GHz_1GB_16bit
- scfw_tcm.bin-1.2GHz_1GB_32bit
- scfw_tcm.bin-1.2GHz_2GB_32bit
From these, we need to combine those that match the RAM size, to produce
bootable images for the different variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the arrival of DualX variants, the device tree files have been renamed
to contain the SOC type (8qxp, or 8dx). This is determined by a new U-Boot
variable 'soc_type'.
Default to "8qxp" if the variable is not defined (old U-Boots).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
This recipe was updated in NXP's 4.14.98-2.0.1 patch release.
https://jira.digi.com/browse/DEL-6618
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The 'do_install()' call was doing a 'cd' command to later do symlinks
more straight forward.
This 'cd' however may affect further 'do_install' appends, that expect to
be working on the ${WORKDIR}.
Remove the 'cd' command and instead supply the correct paths to the 'ln'
commands.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 54bd1e47ad024515b737aea106dc4fca374c0fb8)
The new HWID fields make U-Boot create new variable 'module_ram'.
If it exists use it to select the U-Boot file to use during
firmware update. If not, fall back to old method of using the
variant code and the hard-coded table of variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6598
The new HWID fields make U-Boot create new variable 'module_ram'.
If it exists calculate new HWID fields to check if the SOM has
Wi-Fi, Bluetooth, etc. in order to select the device tree file.
If not, fall back to old method of using the variant code and
the hard-coded table of variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6598
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
When using v1.5, we used a .bbappend to change the revision of the v1.5 recipe
in meta-freescale. Since we're upgrading to a version that isn't supported in
the other layers yet, remove the .bbappend and add the entire v2.0 recipe.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These dependencies went missing when we deleted our first .bb file and replaced
it with a .bbappend. Without these dependencies, the build can sometimes fail.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variant is exactly the same as variant 0x02, but with a new revision
of the i.MX6UL silicon.
https://jira.digi.com/browse/DEL-6555
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update following firmware binaries to tag r10005.1 from
qca6574au-le-2-2-1_qca_oem repo at meta_build/firmware/sdio/
in order to support fast roaming (802.11r) for the qca6564
wireless chip:
e018e7b629b055dc4616c7e88c615b41 otp30.bin
8b638fdaf21f089940d98db518323767 qwlan30.bin
d6ece5037e595000770fbbb6015c0461 utf30.bin
https://jira.digi.com/browse/DEL-6496
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update u-boot-fw-utils patches to apply on current upstream version. Remove
recipe for version 2017.09 since both U-Boot v2017.03 and v2018.03 work fine
with the newer version.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Most of the support has been added to the meta-freescale layer, so
substitute our recipe for a .bbappend and redefine the tasks to build
U-Boot images for our two variants (1GB and 2GB).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Every task in this recipe is already supported in the same way in the
meta-freescale layer, so just keep the .bbappend file to select SRCBRANCH and
SRCREV.
The DDR patch can be removed since that source code is now included into the
SCFW project.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This adds support for U-Boot v2018.03 for CC8X platforms only.
Create 'digi-u-boot.inc' with the common definitions for both v2017.03
and v2018.03.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (f9f8dc905be5732525e0c9e8db7822f3)
This file was generated by calibrating several CC8X SBC Pro boards and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10005.1 on
qca6574au-le-2-2-1_qca_oem repo.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This version supports OpenSSL v1.1.0 by default, which is used in DEY 2.6.
Trying to build older versions of the package will result in failures, so
remove support for said versions entirely.
Our patches apply cleanly except for the hab4_pki_tree.sh automation patch,
which needs a small tweak so it can get applied over the latest version of the
script.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Fix write operation by moving the re-lock of the mmc partition
after performing the system synchronization, if not the mmc
driver throws read-only errors. Also, improved the code
to avoid compilation warnings because the return values were
not managed in write operations.
https://jira.digi.com/browse/DEL-6449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bitbake was using the imx-atf recipe inside of meta-freescale instead of ours.
Said recipe was compiling a different tag, causing our kernel to stop loading
when using our generated imx-boot images.
Remove our .bb file and add a .bbappend that changes the source code revision
to the tag compatible with the rest of the imx-boot files.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Device tree file names won't have the kernel image type like a
prefix anymore, since thud uses the original file names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is a new intermediate file that will be reused in every iteration if it's
not removed, causing all imx-boot images to have the same U-Boot binary.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Up to now, the ConnectCore 8X was using the Bluetooth firmware
files from model QCA6564 r110059.1.
This commit adds the firmware files from repo 'qca6574au-le-2-2-1_qca_oem'
at tag r10005.1:
nvm_tlv_3.2.bin: 3de46ea023570b86cabb9502b92a1fed
based on MD5SUM a97cdfe80e8109cf3574f74cd3c73fc7 but changed
byte 0x36 (decimal 54) to 0x02 (IBS)
rampatch_tlv_3.2.tlv: e8cdb0260615e02bd21c3b3fcaf832eb
The recipe has changed to use the variable QCA_MODEL and each firmware
has moved to a folder of its own.
While on it, remove old Bluetooth firmware files 3.0 which were
not used.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6218
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without these symlinks, U-Boot images will be left out of the installer .zip
file. Unlike the v2015.04 recipe, the default symlinks aren't removed, because
they're needed in the imx-boot recipe for the ccimx8x.
https://jira.digi.com/browse/DEL-6333
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is only a cosmetic change to break away from NXP's versioning and use our
own from now on.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This reflects the fact that the firmware is customized for Digi platforms. The
versioning still follows the one used by NXP in their recipe.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches were originally introduced in the recipe because the DCD files
were needed by mkimage to create the final imx-boot binaries. Now they are
in the SCFW source code instead.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The "sha384sum" tool included in the coreutils package is needed by mkimage
when creating the imx-boot image.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, the default imx-boot images will include the Cortex M4 demo.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These adaptations include changing the mkimage targets and removing any
handling of the DCD files, since they are now included in the SCFW. Note that
these changes break support for step A0 of the silicon.
The md5sum of the imx-sc-firmware tarball will be updated once the step B0 CPUs
are ready.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When the imx-boot recipe is added in EXTRA_IMAGEDEPENDS the
license file is being referenced in image postcommand
write_deploy_manifest, but the licenses of the dependant
packages are missing. This leads to the license files of the
recipes to be missing when write_deploy_manifest runs,
causing build errors to appear.
https://jira.digi.com/browse/DEL-6251
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Generalize DCD patch to be agnostic of the platform and modify the imx-boot
recipe to depend only on the memory configuration instead of the platform name.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Initialize Bluetooth chip in HCI_H4 mode and provide a firmware binary
with the IBS and DEEP_SLEEP mode disabled by default. Also this firmware
enables an internal clock required to maintain the system on low power modes.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This way, customers are less likely to flash the plain u-boot by accident
instead of imx-boot. Also, have the imx-boot recipe look for the u-boot files
in the imx-boot-tools directory.
https://jira.digi.com/browse/DEL-6185
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.4-r2.4-beta
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We have seen errors when verifying the rootfs update on 2 GiB variants. Forcing
otf-update prevents these errors from happening.
https://jira.digi.com/browse/DUB-855
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, make the script recognize the different SOM variants.
https://jira.digi.com/browse/DEL-6175
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit a2a8491140)
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Since this binary (u-boot-atf.bin) wasn't being deleted, the mkimage makefile
was using the one from the previous iteration, causing the 1GB imx-boot to
contain the 2GB U-Boot.
https://jira.digi.com/browse/DEL-6094
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This firmware was built using commit 9a6f1cbba2f49d2284c4211688d3cdd12fc67eca
in our cc8x-scfw repo.
https://jira.digi.com/browse/CC8X-149
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, move all of the recipe's patches from the .bbappend file to the .bb file,
because the .bb file's modifications depend greatly on said patches.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.
The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:
* Support for our platform (based on the mx8qxpa0, which uses A0-specific
parameters for mkimage and appends the DCD explicitly)
* Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
string per platform; so the compile, install and deploy functions had to
be tweaked to build both 1GB and 2GB variants for our platform).
Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In order for Yocto to append all the necessary firmware binaries to the U-Boot
image, this recipe needs to be up to date.
Also, remove the older hardcoded SRCREV in our .bbappend file. The file that
gets patched hasn't been modified since beta1, so our patch apllies cleanly to
beta2.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This adds and AHAB container to the QXP binaries, although according to the
makefiles in the mkimage package, it isn't used in the A0 revision of the CPU.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is needed to match U-Boot's SC API changes. Also, for now, use NXP's
A0 version of the firmware without our customizations until we have access to
the new SCFW SDK.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ATF binary's source code needs to be updated for the new U-Boot to work
properly.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates firmware binaries to tag r10004.2 from
https://stash.digi.com/scm/linux/qca6574au-le-2-2-1_qca_oem.git
and modifies the recipe to use the QCA6574 proprietary driver by default.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 5.4.37 recipe already exists on meta-freescale and the
bbappend was wrongly resetting the COMPATIBLE_MACHINE to only
the ccimx8x.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot's 'dboot' command now supports uncompressing Image.gz.
This will be the default kernel image type for the CC8X.
This also changes the names of the device tree artifacts, that must be
updated on the boot script. While on it, add support for all the SOM
variants (wireless and non-wireless).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This was done using Excel aid sheet:
MX8QXP_LPDDR4_register_programming_aid_ValidationBoard_1.2GHz_v7_DBI_enabled.xlsx
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe builds the Device Configuration Data (DCD) that
configures DRAM controller before the bootloader.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The firmware-qualcomm recipe now provides the Bluetooh and WiFi firmware
for QCA6564 (CC6UL, CC6PLUS) and QCA6574 (CC8X).
The Bluetooth firmware is the same for both chip models.
Regarding the Wifi firmware:
- If using the QCA6564, the proprietary firmware is used.
- If using the QCA6574, the recipe allows to select between the proprietary
or the community driver (via QUALCOMM_WIFI_DRIVER), and will install the
associated firmware. For the community driver, the firmware files have
been copied from linux-firmware repo at SHA1 7518922bd5b9, except for
the file 'board.bin' which needs to be substituted with the proprietary
one by Qualcomm. Default, is to use the community driver.
The do_install() has been improved for re-using the variables with the list
of files.
The package has been renamed basing on the QCA_MODEL variable which can
be set per platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This adds support for U-Boot v2017.03 for all platforms (including CC8X).
For legacy v2015.04:
- Renames u-boot.inc as a versioned file only for v2015.04.
- Moves boot/install scripts from versioned folder into non-versioned
folder (since the scripts remain the same between versions).
For new v2017.03:
- Re-uses poky's u-boot.inc in rocko for v2017.03
- DEY recipe re-writes the do_compile for special U-Boot configuration
required for TrustFence.
- DEY recipe appends the do_deploy, for U-Boot scripts and deploy of
special TrustFence artifacts.
- Adds u-boot-dtb.xxx to UBOOT_CONFIG, required for new U-Boots.
- Adds CC8X scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
Under certain circumstances I was able to create a microSD card with
the FAT file system but corrupt partition table like this one:
Device Boot Start End Sectors Size Id Type
/dev/sdf1p1 778135908 1919645538 1141509631 544,3G 72 unknown
/dev/sdf1p2 168689522 2104717761 1936028240 923,2G 65 Novell Netware 386
/dev/sdf1p3 1869881465 3805909656 1936028192 923,2G 79 unknown
/dev/sdf1p4 2885681152 2885736650 55499 27,1M d unknown
Specifying the partition index made the install script to fail, but
not specifying it makes it work, although it also falls back to use
the first partition in the table.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
In the old u-boot-fw-utils 2016.x the function 'fw_env_close' wrote
the environment to the media. That is no longer the case, now that
function only frees the memory used, and 'fw_env_flush' is used
to write the environment.
This was causing that userspace application using this library were not
able to write changes to the environment.
https://jira.digi.com/browse/DEL-5644
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Generate and include the host tools in the SDK when Trustfence is enabled.
This makes it easier to use the standalone signing and encrypting scripts.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This allows us to save around 4MiB of space in the rootfs image.
(see commit in poky/meta 71ca295786e35b7be84bfd4bc04e0c3ec0f97cd8)
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Support for dynamic location of U-Boot environment was added in
commit 2b5017956b. This forward ports
the patch to Yocto 2.4.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5574
As a side effect, remove U-Boot entry point variable and LOADADDR
extra parameter from the kernel recipe.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5554
Some packages are not updated in meta-freescale/rocko, so we do
need to include some of these.
The patches for gstreamer in the original commit are skipped, as
poky/rocko uses a newer version.
This partially reverts commits:
* 52a10ff88d.
* b06c81b277https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All these recipes and patches are now available and maintained in the
meta-freescale layer.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Pending to update the patch for dynamic environment location in NAND.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
When parsing the recipe, a warning is shown because the tarball is only found
in the downloads folder. However this is expected as it cannot be distributed.
As a workaround, add the tarball to the SRC_URI variable only when Trustfence
is active. That way the warning is not shown in all other cases.
This was incorrectly removed in commit 14fc51147f.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
U-Boot has been able to boot kernel zImage for a long time so make this
the default kernel image.
For the CC6 we still want to use uImage for compatibility reasons.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5237
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit includes ccimx6qpsbc platform in the recipe and adds
U-Boot scripts for deploying and booting the system.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
CC6 PS_ASIC_class_1.pst MD5SUM be8766069eed652449682d9006dd6ecd
https://jira.digi.com/browse/DEL-5057
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new fw-4.bin (v3.4.0.236) with md5sum e2fc33daba2c35fe2c4f62492a44f8b6
was used to pass RED (Radio Equipment Directive) certification on the CC6
module.
https://jira.digi.com/browse/DEL-4512
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Gabriel Valcazar
Arturo Buzarra
Francisco Gil
Gonzalo Ruiz
Hector Palacios
Mike Engel
Alex Gonzalez
hbujanda
Jose Diaz de Grenu
Isaac Hermida
Javier Viguera