Introduce a configurable variable to enable/disable secure co-processor
firmware when TrustFence is enabled.
https://onedigi.atlassian.net/browse/DEL-9813
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
GPIO1 port access was not enabled on ATF because NXP
reserved it to have exclusive access from the secure
world on their EVK.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9839
Fix runtime undefined symbol by wrapping Awb::queueRequest() call to
configureAwbAlgo() with EVISION_ALGO_ENABLED.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Integrate ST libcamera recipe from meta-st-openstlinux layer at
openstlinux-6.6-yocto-scarthgap-mpu-v25.06.11 tag. This recipe is required by
the NPU demos in meta-st-x-linux-ai.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Enable signed firmware to prevent unauthenticated code on the Cortex-M33
co-processor by verifying images against OTP-stored keys.
https://onedigi.atlassian.net/browse/DEL-9813
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Exposing these regulators makes the SM disable them during
a reboot process, which leaves the SoC without power, preventing
it from resetting.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://onedigi.atlassian.net/browse/DEL-9804
Add a patch with the DDR calibration for B0 generated with NXP's config
tool version 2025.09.
https://onedigi.atlassian.net/browse/DEL-9811
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add a variable analogous to TRUSTFENCE_SIGN to enable/disable artifact
encryption. Deprecate TRUSTFENCE_DEK_PATH in favor of TRUSTFENCE_KEYS_PATH to
use a more generic name and avoid overloading it as an on/off flag. Add per-key
variables for encryption key filenames to avoid hardcoded names and allow
platform overrides.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Adds support for signing and encrypting Cortex-M firmware on STM platforms,
following the STM32 MPU Ecosystem v6.1.0. This update enables secure boot of
co-processor binaries on ConnectCore MP2, enhancing firmware protection.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Remove obsolete SD card image creation logic and related variables. We
will use WIC images for bootable SD cards.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Notice that we need to create u-boot and imx-boot symlinks in the deploy
directory, as they are required for the bootloader of the wic images.
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Different platforms use different Cortex-M processors, so instead of
using the M4_DEFAULT_IMAGE_MX95 (as meta-imx does) for an M7 processor,
generalize to the CORTEXM_DEFAULT_IMAGE variable name. Also, move it
to the imx-boot recipe (where it is used) and deploy that image to
the imx-boot-tools directory, so the imx-boot image can be regenerated
externally (without yocto).
https://onedigi.atlassian.net/browse/DEL-9768
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This series of patches expose a number of regulators of
the PMIC to the non-secure world, so that they can be
referenced and used by Linux drivers.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit updates the secure boot support for STM platforms based on the
STM32 MPU Ecosystem v6.1.0. It introduces support for encrypted boot artifacts,
including TF-A and FIP, and enables this functionality for the ConnectCore MP2
platform.
This enhancement allows secure boot deployments with both authentication and
encryption for improved protection of critical boot components.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit imports the Digi custom version of sign-stm32mp bbclass to ensure
that the search_path() function does not raise a build exception if the signing
tool or keys are not present in the PATH before starting the build process.
In our case, we do not need to manually install the tools or generate the keys
beforehand, as this is automatically handled by Yocto in our DEY distribution.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add support for the ccimx95 and reorganize the recipe so that all machine
patches are applied for the DEY distribution, regardless of the build
target.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the ccimx95dvk flavor to OP-TEE, define the UART6 base and DDR
settings, and update the machine mappings using OPTEEMACHINE as the base
recipe does.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Add the ccimx95 platform cloned from mx95lp5. Provide DDR configuration,
configure the console on lpuart6, and update ccimx95-dvk.conf to select
the new board.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit removes the wl_shell and libweston patche, which
are now not necessary anymore. Becasue we have removed the
wayland backend for the LVGL image.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
The Digi commits on the optee-os repository are part of the
same branch and apply on top of each other since they do not
collide with each other.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
After the update of the recipe in meta-freescale this patch
(which exists in meta-freescale) does no longer need to
live in meta-digi.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The Digi commits on the imx-atf repository are now part of the
same branch and apply on top of each other since they do not
collide with each other.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
A recent change in meta-st-x-linux-ai was completely overwriting our default
PACKAGECONFIG values, causing several plugins to be omitted (for example, the
wayland plugin). In turn, this was causing several build errors in many
packages that depend on said plugins.
Use a strict PACKAGECONFIG assignment to prevent this. As a side effect, this
removes the new "uvcsink" PACKAGECONFIG introduced by the recent change in
meta-st-x-linux-ai, so make sure to re-add it to avoid unexpected behavior when
building the brand new people-tracking-heatmap AI example.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
meta-freescale updated the base recipe for NXP's release 6.6.52_2.2.1,
so our overrides in the bbappend are no longer needed.
https://onedigi.atlassian.net/browse/DEL-9748
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This commit introduces a custom export_binaries() function to resolve a
deployment issue affecting the final TF-A artifact path. The issue occurs when
the SoC name does not match the TF-A device tree name.
This fix is required due to changes introduced in commit f0b4d0d02a
("ccmp15: enable secure_system_service for CCMP15"), which modified the TF-A
artifact generation process.
https://onedigi.atlassian.net/browse/DEL-9734
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit updates the Digi custom .bbappend recipes for FIP and TF-A to align
with the latest ST BSP release, based on the openstlinux-6.6-yocto-scarthgap-mpu-v25.06.11
tag for Yocto 5.0 (scarthgap).
https://onedigi.atlassian.net/browse/DEL-9734
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit fixes the default secure storage path
to /mnt/data/tee instead of /var/lib/tee. This will
store all secure storage keys in that path and will
keep them even during rootfs updates.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
mwifiex driver is not able to automatically download the corresponding
rgpower binary after receiving CountryIE beacon information from country
XX, so we have to do it manually running "iw reg set XX".
However, the driver considers country XX is already configured and
ignores the rgpower download request.
Fix it by not processing the countryIE information in the driver by
adding a patch from NXP that will be integrated in their next
official release.
https://onedigi.atlassian.net/browse/DEL-8974
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add service to automatically detect changes in the global regulatory
domain and force a PHY regulatory domain change.
This allows detecting regulatory domain changes based on beacon
information when 802.11d is enabled and instructing the wireless
driver to download the rgpower firmware file corresponding to the
selected country.
If the selected country is not one of the supported ones, Worldwide
rgpower_WW.bin file will be downloaded by default.
Run the check service every 5 seconds through a systemd timer.
https://onedigi.atlassian.net/browse/DEL-8974
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Javier Viguera
Arturo Buzarra
Hector Palacios
Mike Engel
Gabriel Valcazar
Gonzalo Ruiz