Every task in this recipe is already supported in the same way in the
meta-freescale layer, so just keep the .bbappend file to select SRCBRANCH and
SRCREV.
The DDR patch can be removed since that source code is now included into the
SCFW project.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This adds support for U-Boot v2018.03 for CC8X platforms only.
Create 'digi-u-boot.inc' with the common definitions for both v2017.03
and v2018.03.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (f9f8dc905be5732525e0c9e8db7822f3)
This file was generated by calibrating several CC8X SBC Pro boards and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10005.1 on
qca6574au-le-2-2-1_qca_oem repo.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This version supports OpenSSL v1.1.0 by default, which is used in DEY 2.6.
Trying to build older versions of the package will result in failures, so
remove support for said versions entirely.
Our patches apply cleanly except for the hab4_pki_tree.sh automation patch,
which needs a small tweak so it can get applied over the latest version of the
script.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Fix write operation by moving the re-lock of the mmc partition
after performing the system synchronization, if not the mmc
driver throws read-only errors. Also, improved the code
to avoid compilation warnings because the return values were
not managed in write operations.
https://jira.digi.com/browse/DEL-6449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bitbake was using the imx-atf recipe inside of meta-freescale instead of ours.
Said recipe was compiling a different tag, causing our kernel to stop loading
when using our generated imx-boot images.
Remove our .bb file and add a .bbappend that changes the source code revision
to the tag compatible with the rest of the imx-boot files.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Device tree file names won't have the kernel image type like a
prefix anymore, since thud uses the original file names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is a new intermediate file that will be reused in every iteration if it's
not removed, causing all imx-boot images to have the same U-Boot binary.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Up to now, the ConnectCore 8X was using the Bluetooth firmware
files from model QCA6564 r110059.1.
This commit adds the firmware files from repo 'qca6574au-le-2-2-1_qca_oem'
at tag r10005.1:
nvm_tlv_3.2.bin: 3de46ea023570b86cabb9502b92a1fed
based on MD5SUM a97cdfe80e8109cf3574f74cd3c73fc7 but changed
byte 0x36 (decimal 54) to 0x02 (IBS)
rampatch_tlv_3.2.tlv: e8cdb0260615e02bd21c3b3fcaf832eb
The recipe has changed to use the variable QCA_MODEL and each firmware
has moved to a folder of its own.
While on it, remove old Bluetooth firmware files 3.0 which were
not used.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6218
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without these symlinks, U-Boot images will be left out of the installer .zip
file. Unlike the v2015.04 recipe, the default symlinks aren't removed, because
they're needed in the imx-boot recipe for the ccimx8x.
https://jira.digi.com/browse/DEL-6333
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is only a cosmetic change to break away from NXP's versioning and use our
own from now on.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This reflects the fact that the firmware is customized for Digi platforms. The
versioning still follows the one used by NXP in their recipe.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches were originally introduced in the recipe because the DCD files
were needed by mkimage to create the final imx-boot binaries. Now they are
in the SCFW source code instead.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The "sha384sum" tool included in the coreutils package is needed by mkimage
when creating the imx-boot image.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, the default imx-boot images will include the Cortex M4 demo.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These adaptations include changing the mkimage targets and removing any
handling of the DCD files, since they are now included in the SCFW. Note that
these changes break support for step A0 of the silicon.
The md5sum of the imx-sc-firmware tarball will be updated once the step B0 CPUs
are ready.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When the imx-boot recipe is added in EXTRA_IMAGEDEPENDS the
license file is being referenced in image postcommand
write_deploy_manifest, but the licenses of the dependant
packages are missing. This leads to the license files of the
recipes to be missing when write_deploy_manifest runs,
causing build errors to appear.
https://jira.digi.com/browse/DEL-6251
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Generalize DCD patch to be agnostic of the platform and modify the imx-boot
recipe to depend only on the memory configuration instead of the platform name.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Initialize Bluetooth chip in HCI_H4 mode and provide a firmware binary
with the IBS and DEEP_SLEEP mode disabled by default. Also this firmware
enables an internal clock required to maintain the system on low power modes.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This way, customers are less likely to flash the plain u-boot by accident
instead of imx-boot. Also, have the imx-boot recipe look for the u-boot files
in the imx-boot-tools directory.
https://jira.digi.com/browse/DEL-6185
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.4-r2.4-beta
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We have seen errors when verifying the rootfs update on 2 GiB variants. Forcing
otf-update prevents these errors from happening.
https://jira.digi.com/browse/DUB-855
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, make the script recognize the different SOM variants.
https://jira.digi.com/browse/DEL-6175
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit a2a8491140)
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Since this binary (u-boot-atf.bin) wasn't being deleted, the mkimage makefile
was using the one from the previous iteration, causing the 1GB imx-boot to
contain the 2GB U-Boot.
https://jira.digi.com/browse/DEL-6094
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This firmware was built using commit 9a6f1cbba2f49d2284c4211688d3cdd12fc67eca
in our cc8x-scfw repo.
https://jira.digi.com/browse/CC8X-149
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, move all of the recipe's patches from the .bbappend file to the .bb file,
because the .bb file's modifications depend greatly on said patches.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.
The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:
* Support for our platform (based on the mx8qxpa0, which uses A0-specific
parameters for mkimage and appends the DCD explicitly)
* Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
string per platform; so the compile, install and deploy functions had to
be tweaked to build both 1GB and 2GB variants for our platform).
Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In order for Yocto to append all the necessary firmware binaries to the U-Boot
image, this recipe needs to be up to date.
Also, remove the older hardcoded SRCREV in our .bbappend file. The file that
gets patched hasn't been modified since beta1, so our patch apllies cleanly to
beta2.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This adds and AHAB container to the QXP binaries, although according to the
makefiles in the mkimage package, it isn't used in the A0 revision of the CPU.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is needed to match U-Boot's SC API changes. Also, for now, use NXP's
A0 version of the firmware without our customizations until we have access to
the new SCFW SDK.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ATF binary's source code needs to be updated for the new U-Boot to work
properly.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates firmware binaries to tag r10004.2 from
https://stash.digi.com/scm/linux/qca6574au-le-2-2-1_qca_oem.git
and modifies the recipe to use the QCA6574 proprietary driver by default.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 5.4.37 recipe already exists on meta-freescale and the
bbappend was wrongly resetting the COMPATIBLE_MACHINE to only
the ccimx8x.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot's 'dboot' command now supports uncompressing Image.gz.
This will be the default kernel image type for the CC8X.
This also changes the names of the device tree artifacts, that must be
updated on the boot script. While on it, add support for all the SOM
variants (wireless and non-wireless).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This was done using Excel aid sheet:
MX8QXP_LPDDR4_register_programming_aid_ValidationBoard_1.2GHz_v7_DBI_enabled.xlsx
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe builds the Device Configuration Data (DCD) that
configures DRAM controller before the bootloader.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The firmware-qualcomm recipe now provides the Bluetooh and WiFi firmware
for QCA6564 (CC6UL, CC6PLUS) and QCA6574 (CC8X).
The Bluetooth firmware is the same for both chip models.
Regarding the Wifi firmware:
- If using the QCA6564, the proprietary firmware is used.
- If using the QCA6574, the recipe allows to select between the proprietary
or the community driver (via QUALCOMM_WIFI_DRIVER), and will install the
associated firmware. For the community driver, the firmware files have
been copied from linux-firmware repo at SHA1 7518922bd5b9, except for
the file 'board.bin' which needs to be substituted with the proprietary
one by Qualcomm. Default, is to use the community driver.
The do_install() has been improved for re-using the variables with the list
of files.
The package has been renamed basing on the QCA_MODEL variable which can
be set per platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This adds support for U-Boot v2017.03 for all platforms (including CC8X).
For legacy v2015.04:
- Renames u-boot.inc as a versioned file only for v2015.04.
- Moves boot/install scripts from versioned folder into non-versioned
folder (since the scripts remain the same between versions).
For new v2017.03:
- Re-uses poky's u-boot.inc in rocko for v2017.03
- DEY recipe re-writes the do_compile for special U-Boot configuration
required for TrustFence.
- DEY recipe appends the do_deploy, for U-Boot scripts and deploy of
special TrustFence artifacts.
- Adds u-boot-dtb.xxx to UBOOT_CONFIG, required for new U-Boots.
- Adds CC8X scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
Under certain circumstances I was able to create a microSD card with
the FAT file system but corrupt partition table like this one:
Device Boot Start End Sectors Size Id Type
/dev/sdf1p1 778135908 1919645538 1141509631 544,3G 72 unknown
/dev/sdf1p2 168689522 2104717761 1936028240 923,2G 65 Novell Netware 386
/dev/sdf1p3 1869881465 3805909656 1936028192 923,2G 79 unknown
/dev/sdf1p4 2885681152 2885736650 55499 27,1M d unknown
Specifying the partition index made the install script to fail, but
not specifying it makes it work, although it also falls back to use
the first partition in the table.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
In the old u-boot-fw-utils 2016.x the function 'fw_env_close' wrote
the environment to the media. That is no longer the case, now that
function only frees the memory used, and 'fw_env_flush' is used
to write the environment.
This was causing that userspace application using this library were not
able to write changes to the environment.
https://jira.digi.com/browse/DEL-5644
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Generate and include the host tools in the SDK when Trustfence is enabled.
This makes it easier to use the standalone signing and encrypting scripts.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This allows us to save around 4MiB of space in the rootfs image.
(see commit in poky/meta 71ca295786e35b7be84bfd4bc04e0c3ec0f97cd8)
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Support for dynamic location of U-Boot environment was added in
commit 2b5017956b. This forward ports
the patch to Yocto 2.4.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5574
As a side effect, remove U-Boot entry point variable and LOADADDR
extra parameter from the kernel recipe.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5554
Some packages are not updated in meta-freescale/rocko, so we do
need to include some of these.
The patches for gstreamer in the original commit are skipped, as
poky/rocko uses a newer version.
This partially reverts commits:
* 52a10ff88d.
* b06c81b277https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All these recipes and patches are now available and maintained in the
meta-freescale layer.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Pending to update the patch for dynamic environment location in NAND.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
When parsing the recipe, a warning is shown because the tarball is only found
in the downloads folder. However this is expected as it cannot be distributed.
As a workaround, add the tarball to the SRC_URI variable only when Trustfence
is active. That way the warning is not shown in all other cases.
This was incorrectly removed in commit 14fc51147f.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
U-Boot has been able to boot kernel zImage for a long time so make this
the default kernel image.
For the CC6 we still want to use uImage for compatibility reasons.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5237
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit includes ccimx6qpsbc platform in the recipe and adds
U-Boot scripts for deploying and booting the system.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
CC6 PS_ASIC_class_1.pst MD5SUM be8766069eed652449682d9006dd6ecd
https://jira.digi.com/browse/DEL-5057
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new fw-4.bin (v3.4.0.236) with md5sum e2fc33daba2c35fe2c4f62492a44f8b6
was used to pass RED (Radio Equipment Directive) certification on the CC6
module.
https://jira.digi.com/browse/DEL-4512
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
A mechanism was introduced in U-Boot to dynamically locate the environment
copies within a NAND partition, skipping bad blocks and making full use of
the partition blocks.
To trigger this mechanism in Linux tools (fw_printenv/fw_setenv) the
configuration file /etc/fw_env.config must have both copies entries
pointing to the same offset.
This commit substitutes the hardcoded configuration file for CC6UL with a
stub and generates one on an RPM post-script basing on:
- Supplied DEY variables (with default values per platform):
- UBOOT_ENV_OFFSET: starting offset of the environment within the
partition.
- UBOOT_ENV_SIZE: size of each copy of the environment.
- UBOOT_ENV_RANGE: size in the partition that the environment copies may
occupy, starting from UBOOT_ENV_OFFSET. If undefined, the whole
partition is used.
- Calculated values:
- NAND Erase block size
- Number of blocks available for the environment copies
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4256
This is a Consumer dual-core 1GHz, 4GB eMMC, 1GB DDR3, 0/+70C variant
without bluetooth, no wireless, no kinetis.
https://jira.digi.com/browse/DEL-4280
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results including the 2 dB power reduction
from DVT.
md5sums:
a5635e39aaaa220094e0d07f7a4f4567 bdwlan30_US.bin
cabebad84a6afc1c2a7d795d31dda480 bdwlan30_World.bin
https://jira.digi.com/browse/CC6UL-740
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Variant 0x04 has wireless and must select the '-wb' device tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4100
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
The firmware configuration and the driver configuration are part of the
driver repository. Stop duplicating the content in meta-digi so they
are updated with the driver itself.
https://jira.digi.com/browse/DEL-4021
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will allow to get the package from a premirror in case it is not
already downloaded in the DL_DIR.
https://jira.digi.com/browse/DEL-3051
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- Instead of using a different boot script when booting from linux
and from recovery, merge them into one script that checks the
boot source.
https://jira.digi.com/browse/DEL-3836
Signed-off-by: David Escalona <david.escalona@digi.com>
Patches added in 'meta-swupdate' (backported from U-Boot) broke our
layer. We also had those patches, so remove them and make sure the
rest or our patches are applied after the ones from 'meta-swupdate'
by using an anonymous python function instead of appending to the
SRC_URI variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new calibration settings
updated with the latest certification results.
md5sums:
bdwlan30_US.bin: f2c414adb682a8cd95e72593fad7fa08
bdwlan30_World.bin: 12e2bae1a871e2a3dfa6ded0ee675c09
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Refresh the patches with GIT so they apply cleanly using "git am".
Otherwise they fail with:
Applying: openssl_helper: use /dev/urandom as seed source
error: corrupt patch at line 16
Patch failed at 0003 openssl_helper: use /dev/urandom as seed source
Applying: hab4_pki_tree.sh: usa a random password for the default PKI generation
warning: keys/hab4_pki_tree.sh has type 100755, expected 100644
Notice that they were not failing in Yocto, as it does not use "git am"
to apply patches, but it's better to have the patches correctly done.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
On a CC6, the 'env default -a' command deletes the 'soc_family' variable
that is used on the U-Boot boot scripts to configure the name of the
device tree file to load.
Then if we try to boot into recovery directly (without a reset) because
the variable is not available, it fails to compose the correct name for
the fdt, and gives the error:
reading uImage--ccimx6sbc-id129.dtb
** Unable to read file uImage--ccimx6sbc-id129.dtb **
Force a reset, so the 'soc_family' variable is available again and the
correct fdt_file is loaded.
While on it, add some blank lines to the 'recovery reboot' message, so
it's easier to read.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The caam encryption check was only done from fw_env_write and fw_env_read
functions, which are not called when using the functions exported as a library.
Move the check_caam_encryption() call to fw_env_open(), which is called from
all code paths. A similar check for AES encryption cannot be moved because it
requires the AES key as an argument.
https://jira.digi.com/browse/DEL-3616
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NAND partitions may have pre-existing UBI volume information
and that will tell U-Boot to use 'ubiwrite' to keep UBI wear
leveling information instead of erasing the NAND partition
beforehand. Given that the UBI support in U-Boot is not
particularly complete and stable, and specially if the NAND
partition table has been changed, this could result into
problems during the UBI volume initialization or during the
update process. To prevent such problems it is better that
the NAND partitions are erased.
This loses the UBI wear leveling information but provides
a more reliable deployment install script.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-718
Modify patch to clean compiler warning:
warning: passing argument 1 of 'sysfs_mmcboot_set_protection' discards
'const' qualifier from pointer target type
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Even though this variable is documented as unused, removing it fails
wireless regression tests.
https://jira.digi.com/browse/DEL-3501
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The following document,
JQCA61x4, QCA65x4, and QCA937x
Configuration Parameters Specification
80-Y7674-11 Rev. J
September 30, 2016
Contains a list of unused configuration arguments in page 29. This commit
removes those listed arguments that appeared on the default configuration
file to avoid confusion.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Implements functions to get and set variables from U-Boot's environment.
https://jira.digi.com/browse/DEL-3358
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These have been provided by the embedded hardware team and they are to
be used for certification testing. The calibration corresponds to the
internal antenna on the module. If using the current external antenna on the
CC6UL SBC they work fine, although they could be tweaked to improve.
The BDF files provided were generated from the original ones, by running a
test tree for output power calibration for QCA6564A-3 chip. This test
tree is called
‘FCCSP_Rome3.x_WLAN_CLPC_cal_and_WLAN_BT_Verify_Y8611-H341.xtt’ and it
belongs to the Qualcomm Design Package ‘DP25-WL420-100’.
The test tree is to be run in the QSPR software tool, part of the QDART
software tools set provided by Qualcomm.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
As discovered during certifications preparation work, calibration changes
applied only on the bdwlan30.bin file do not take effect.
Per QCA guidelines, the bdwlan30.bin and utfbd30.bin files should be the
same for the calibration changes to work.
This commit removes the current utfbd30.bin file, with an md5sum that
matches the original bdwlan30.bin file in QCA's chipcode
qca6564-le-1-0-3_qca_device repository, and creates a symbolic link to the
actual bdwlan30.bin board file used to certify Digi's module internal
antenna.
https://jira.digi.com/browse/DEL-3454
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The codec MAX98088 present on the ccimx6ulsbc only needs one
configuration file that can play and record.
The default file enables the interfaces present on the ccimx6ulsbc:
- Headphones
- Speaker
- LineOut (in stereo mode)
- LineIN-A
- MIC2
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2352
The patch with the same name in 'meta-swupdate' fails to apply cleanly
after the patches we have done in meta-digi. So add here a version of
the patch that applies cleanly and with higher precedence in the search
path (using 'dey' distro override).
https://jira.digi.com/browse/DEL-3355
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
A corner case requires to save the environment so that the
boot command works after reset.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-681
Also change the image type of dey-image-trustfence-initramfs.
https://jira.digi.com/browse/DUB-615
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
The default DEY image recipe for ccimx6ulsbc builds dey-image-qt.
The graphical backend is determined dynamically.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Otherwise they are overridden with config files from other layers (for
example meta-fsl-arm) that may not be valid for our platforms.
https://jira.digi.com/browse/DEL-3046
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Set of the World country code in the BDF file. It was lost after syncing to the
latest QCA BDF files (commit b80f00f14a).
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
This patch adds the functionality to automatically detect if the enviroment
is encrypted (through the device tree). If it is, the environment is encrypted
and decrypted as required in a transparent way for the user.
https://jira.digi.com/browse/DEL-2836
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
https://jira.digi.com/browse/DEL-2925
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Tweaked to maintain the u-boot and linux revisions to AUTOREV instead of
the fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
So the warning message shows the TF variable setting in the correct
syntax that they should be written in the project's local.conf
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is native only, this patch ensures it can only be built
natively and fix the following problems:
* Add openssl-native rather than openssl to the dependencies.
* Use the $(CC) $(LDFLAGS) and $(CFLAGS) that Yocto provides to avoid a
compilation error.
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
We are including two firmware files: one for setting the country to US and the
other one to set it to the World Wide Roaming region (SKU 0060).
https://jira.digi.com/browse/DEL-2774
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
The correct U-Boot branch to be used with dey-2.0/master is v2015.04/master, as
it contains the latest development changes (just like dey-2.0/master).
This reverts commit 728619a5bc.
After commit b0a766eafc8 in the U-Boot repository, both signed and
encrypted images will be generated. Copy both of them to the deploy folder
https://jira.digi.com/browse/DUB-642
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
This allows to automatically create a secure PKI tree without user
interaction.
https://jira.digi.com/browse/DUB-618
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
NXP Code signing Tool for the High Assurance Boot library is needed for
signing and encrypting different artifacts (U-Boot image, uImage, ...).
As the CST cannot be included in DEY, the user needs to download the
tarball and add it to the recipe folder.
https://jira.digi.com/browse/DUB-618
Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com>
U-Boot environment on the CC6UL NAND is located at partition /dev/mtd1:
- original copy is located at offset 0 in the partition
- redundant copy is located 1 erase block (128K) after the original copy
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2552
At the moment there is no support for rootfs encryption for the CC6UL,
so there is not a ramdisk in the boot image. But with the initial
addition of TF support, the u-boot boot script was being on-the-fly
updated for TF regardless of the platform, making the CC6UL unable to
boot when TF was enabled.
This commit fixes the problem, by just changing the u-boot boot script
when TF is enabled only for the CC6.
https://jira.digi.com/browse/DEL-2754
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
builds.
When building multiple u-boots they get compiled externally into a
directory named after machine defconfigs.
Once there is a directory with the same name as a defconfig it is not
possible to run the defconfig make target.
Fixes https://jira.digi.com/browse/DEL-2644
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
builds.
When building multiple u-boots they get compiled externally into a
directory named after machine defconfigs.
Once there is a directory with the same name as a defconfig it is not
possible to run the defconfig make target.
This change should be only temporary until it gets upstream.
Fixes https://jira.digi.com/browse/DEL-2644
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
When Trustfence is enabled, this adds a dependence on the TF initramfs,
so it's built and added to the boot image.
It also modifies the u-boot boot script on the fly, to boot correctly
using the Trustfence initramfs.
https://jira.digi.com/browse/DEL-2278
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- boot.txt
Sets the device tree filename basing on the SOM variant read from
the HWID and boots from NAND.
- install_linux_fw_sd
Deploys a full system (as generated by Digi Embedded Yocto) from
a FAT formatted micro SD card into the NAND flash.
The u-boot-dey recipe is now fully shared by ccimx6 and ccimx6ul platforms
so we can remove the platform-specific appends.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The setting of 'bootcmd' in the script was done using single quotes, which
doesn't expand variables. As a consequence the following variables must
be defined again (during the execution of the second part of the script):
- mmcdev
- INSTALL_LINUX_FILENAME
- INSTALL_ROOTFS_FILENAME
This patch changes the single quotes with double quotes, so that these
variables are expanded during the setting of 'bootcmd' with the values
assigned at the begining of the installation script (notice these are
not dynamically generated so there is no risk to expand them).
At the same time we need to escape with a backslash:
- double quotes containing strings
- variables that we don't want to expand (like the return value $?)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
- Add semi-colons to instructions inside 'setenv' commands
- Remove semi-colons in instructions where they are not needed (for
consistency with the rest of instructions)
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
There are several possible values for TRUSTFENCE_UBOOT_ENV_DEK:
* Not defined: if the trustfence support is not included.
Should not include the feature.
* 32 characters: when defining a valid key.
Should include the feature.
* "0": when explicetily disabling the feature.
Should not include the feature
* <other>: Invalid value, should trigger the error.
This commits fixes the logic so that 'None' (no defined) is taken as a valid
value.
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
https://jira.digi.com/browse/DEL-2603
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Implement the set of TRUSTFENCE_ macros to configure each secure boot feature
available in U-Boot.
https://jira.digi.com/browse/DUB-570
Signed-off-by: Jose Diaz de Grenu de Pedro <Jose.DiazdeGrenudePedro@digi.com>
Adding some early initial support as a copy of ccimx6 files.
https://jira.digi.com/browse/DEL-2529
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
COMPATIBLE_MACHINE is a regular expression, so we need to update the current
pattern for ccimx6 due to it will also match with ccimx6ul.
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Old versions of u-boot 'v2013.0x' have a bug in the shell's test command
that makes structures like:
if test "${not-existing}" = "0x01"; then ...
if test -z "${not-existing}"; then ...
to fail when the checked variable does not exist.
So implement workarounds in the updater script to overcome this problem.
This is needed because the script may be used in modules with an old
pre-installed u-boot.
https://jira.digi.com/browse/DEL-2231
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The install script allows for an easy deployment of the DEY firmware
artifacts into the eMMC of the ConnectCore 6 by using a micro SD card.
The install script:
- updates U-Boot
- resets the U-Boot environmnet to default values
- formats the User Data partition of the eMMC
- installs the firmware images (linux and rootfs partitions)
- resets/starts the system
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
The canonical symlinks created by poky's U-Boot class in u-boot.inc for
the different U-Boot configs are in the form:
u-boot.imx-<config>
u-boot-<machine>.imx-<config>
These symlinks have the .imx file extension hidden in the middle of the
file name, which looks ugly.
For DEY, remove these unused symlinks and generate new ones in the form:
u-boot-<config>.imx
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2192
As the plan is to use the same git objects (SHA1) in the internal and
github repos, also remove that internal/external SRCREV infrastructure.
https://jira.digi.com/browse/DEL-2205
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Carrier board version is determined by U-Boot variable $board_id
which will be defined if a board ID has been burned on certain
OTP bits.
Use the value in this variable to create the $fdt_file variable
using the suffix "-id${board_id}" to point to the device tree
file that matches that board ID.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-2160
ERROR: u-boot-dey: md5 data is not matching for file://Licenses/README;md5=0507cd7da8e7ad6d6701926ec9b84c95
ERROR: u-boot-dey: The new md5 checksum is c7383a594871c03da76b3707929d2919
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
ccimx51js and ccimx53js are not supported in this version of DEY.
Support for those platforms is in previous versions of DEY.
https://jira.digi.com/browse/DEL-1890
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is an atheros proprietary package that contains the athtestcmd and
wmiconfig applications.
Neither of them are currently used.
https://jira.digi.com/browse/DEL-1878
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Split the ATH6KL firmware files to a different recipe and package so
they can be used regardless of what driver we are using (the external
module or the upstream driver).
Reuse the 'firmware-atheros' recipe which was creating a package with
bluetooth firmware, to create the package with wireless firmware as
well.
Also remove 'ccimx6' as compatible machine for the external atheros
module, as the module does not even compile with the kernel version we
are using (3.14).
https://jira.digi.com/browse/DEL-1858
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
There is only one u-boot supported for each platform, so there is no
need to explicitly set the u-boot preferred version.
As a result it was needed to rework the nvram recipe which was using the
removed PREFERRED_VERSION_u-boot-dey variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of creating a new recipe for u-boot fw-utils (fw_printenv) just
bbappend the recipe in Poky.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
* Merge u-boot-dey-rev_2015.04.inc into the recipe. There is no need to
split the recipe, as there is no other recipe using this u-boot code.
* Update uboot configurations to the new format '_defconfig'. Also add
the new 2GB variant.
* Remove PREFERRED_VERSION_u-boot-dey for CC6, as there is only one
version available for this platform.
https://jira.digi.com/browse/DEL-1829
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is a Consumer quad-core 1.2GHz, 4GB eMMC, 2GB DDR3, -20/+85C variant
with bluetooth and wireless, no kinetis.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Now each platform is only supported in one kernel version, so there is
no need to have multiple alsa config files per linux kernel version.
https://jira.digi.com/browse/DEL-1747
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The following section configures the Audio Data Path to Voice Over UART.
//Audio - Audio main config
[H:S]0041
[H:S]0004
[H:A]01 00 00 00
The syntax is explained in the AR3002 2.2 Tag definition 1.0 document from
Qualcomm/Atheros.
Other audio sections are removed as they are not being used.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Adapt u-boot bootscript after latest changes in 'mmcdev' variable
semantics. Now the boot media device is stored in 'mmcbootdev' variable.
Also set the device tree filename depending on the hardware variant.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Support new memory chips for 'ccardimx28js'.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit b7d108c35f6a26a78a4fbab399fd2c0878976a67)
Add post-installation script that runs on first boot to reconfigure the
u-boot environment depending on the media (EMMC,SD) the target is
booting from.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8486d120355d80ea8ad5864596c8486a1d3c0db2)
This is needed in the context of CC6 variants 0x7 and 0x9 (EMMC-less).
Changes:
* Do not use 'meta-fsl-arm' image generation class: removed include and
override SDCARD generation function
* Use same VFAT boot image for EMMC and SD card. The u-boot bootscript
has been adapted to be able to boot Linux from both SD and EMMC.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8b8456b8fd90facd92dfc87632effa582ca60475)
Remove the current DEY variants support and framework for CC6 because in
following commits we will add support for all *hardware* variants in
just one set of DEY images for CC6.
https://jira.digi.com/browse/DEL-1569
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The previous class 1 settings for the atheros bluetooth resulted in
output power higher than what is allowable in all regulatory
domains where class 1 devices are allowed on the CC6. The updated class 1
regulatory settings here reduce the maximum output power to levels
which pass when tested at an external lab.
This change resolves CCIMX6-389.
Signed-off-by: Paul Osborne <Paul.Osborne@digi.com>
Those packages are not machine specific, so there is no need to set
PACKAGE_ARCH to ${MACHINE_ARCH}.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
athtestcmd and wmiconfig are proprietary tools from Atheros. When
installed from GitHub we use prebuilt binaries because we cannot provide
the source code to the customers.
The prebuilt binaries need to be platform dependent, because the
'ccardimx28' uses soft-float binaries while the 'ccimx6' uses hard-float
binaries. Otherwise there is a failure:
root@ccimx6sbc:~# /usr/sbin/athtestcmd
-sh: /usr/sbin/athtestcmd: not found
While on it, removed the checksums for the binaries, as Yocto does
not verify checksums for local files by default, only for downloaded
files.
https://jira.digi.com/browse/DEL-1586
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 8a3a124c75a885a619b41bf1e17118f1b3dec13c)
The SD card images support added a dependence to mkimage native tool.
Otherwise the build may fail with:
mkimage: not found
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
With yocto 1.8 we need to pass CC and LD from yocto environment to
imx-bootlets makefile. Otherwise it fails:
arm-dey-linux-gnueabi-ld: cannot find -lgcc
make[1]: *** [output-target/linux_prep] Error 1
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Yocto 1.8 is more strict in the syntax when you append more flags to the
CFLAGS variable, because with previous yocto versions these packages
used to build fine and now fail with:
run.sstate_create_package: Syntax error: "(" unexpected
Use a different EXTRA_CFLAGS variable for our custom flags instead of
the standard CFLAGS.
https://jira.digi.com/browse/DEL-1558
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
It has never been a mirror of upstream packages.
It's the URL of packages needed for the BSP. These packages are mostly
Digi specific and not provided in any other location.
https://jira.digi.com/browse/DEL-1493
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit d4cf9a88c9db39c6ecfd0099437d82af81c96e85)
This completes the support for ccimx6sbc variants:
* support device tree variants
* split variants '0x01,0x02,0x04' group in two different groups (with or
without kinetis)
https://jira.digi.com/browse/DEL-1359
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(cherry picked from commit 3f20015411f4e270b2e2c8faf292678c75ff2aff)
Notes:
* This version of u-boot does not support comments in scripts
* Enabled EXT4 in kernel config (for the SDCARD rootfs)
https://jira.digi.com/browse/DEL-197
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The removal was added as a workaround to avoid installing a generic
asound.conf that was conflicting with our cards.
This is no longer needed as poky installs an empty asound.conf and
meta-fsl-arm overrides it with per-platform asound.conf files.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Those hacks were added to fix a problem when building development images
(with 'dev-pkgs' image feature enabled). In that case the developemnt
packages (libdigi-dev and microwindows-dev) have a dependence on the
normal packages (libdigi and microwindows). But those packages are not
created by default because they are empty, thus the needed ALLOW_EMPTY hack.
Fix the problem by just resetting the runtime dependences of the -dev
packages. This allows to not create empty libdigi and microwindows
packages.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
While on it, rework and simplify atheros firmware recipe:
* remove 'unknown' version (renamed recipe)
* do not create empty debug and development packages
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Needing to set the branch where a specific SHA1 revision is contained is
a unnecessary constraint that can be bypassed setting 'nobranch=1' in
the SRC_URI.
We do that for all the external repos (GitHub) plus the internal ones
for the im-xbootlets and the atheros kernel module (as those two repos
are stable enough and we are not developing actively on them).
For U-Boot and Linux we keep the SRCBRANCH framework for internal repos
as this is needed for the AUTOREV yocto feature.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Starting with Yocto 1.6 there is a need to configure in which branch a
specific SHA1 revision is included. We need a framework to set such
branches both for internal git repos and for external ones (Github).
If the branch is not specified in the SRC_URI, the do_fetch task may
fail even though the SHA1 revision exists in the repository.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
By default EMMC boot partition is locked. This prevents fw_setenv
utility to configure the u-boot environment from Linux.
This commit adds a patch that unlocks the EMMC boot partition just
before writing into it and then locks it again once the environment is
written.
https://jira.digi.com/browse/DEL-1021
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The setlocalversion script in u-boot 2009.08 did not have the
'--save-scmversion' parameter so the build was failing.
But for that version the whole do_compile_prepend can be removed because
it's not needed at all.
While on it, update the revisions for versions 2009.08 and 2013.01 to
include a fix done in 'setlocalversion' script.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This fix an error building 'nvram' for ccardimx28js:
ERROR: Fetcher failure: Unable to find revision ... in branch master even from
upstream
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This cleans following warning:
Use of PRINC is deprecated.
The PR server should be used to automatically increment the PR.
See: https://wiki.yoctoproject.org/wiki/PR_Service
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Building u-boot with Yocto does not show the version string in the
u-boot header. This is due to how Yocto compiles u-boot. It creates a
.scmversion file which may contain LOCALVERSION strings but in our case
it's empty. Later at build time u-boot's setlocalversion script detects
that file exists and exits with no further action (because it assumes
the file contains the version string).
https://jira.digi.com/browse/DEL-1007
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Provides fw_printenv/fw_setenv utilities to read/write the u-boot
environment from Linux.
https://jira.digi.com/browse/DEL-800
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This package is now used in both ccimx6adpt and ccardimx28js.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These utilities are very tight to the hardware so they need to be in
the BSP layer. This way they can also be installed in a poky distro
core-image-minimal without meta-digi-dey layer.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Instead of using a SHOWCURSOR variable hardcoded from the
HAVE_TOUCHSCREEN environment var, allow to set it freely in formfactors
config file and use it to show (or not) the cursor in the graphic
session.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Formfactor config files are needed in now so the touchscreen calibration
is loaded on target's boot. Otherwise the touch is not calibrated.
https://jira.digi.com/browse/DEL-910
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This was supported in kernel 2.6.35 (FSL release) but not in community
kernel 3.10
https://jira.digi.com/browse/DEL-839
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move the BOARD selection out of the bootlets recipe so it can be used
from machines defined in other layers.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This version does not properly work with v3.10 kernel, while
the newer version 3.0.35-4.1.0 does work for old and new
kernels.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
This set of patches are forward port of patches for old version
10.12.01 and to make it work with v3.10 kernel.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
Most SRC_URI defaults to DIGI_LOG_GIT. This patch sets a more generic
name (DIGI_GIT) that defaults to DIGI_LOG_GIT, but is configurable by
someone who might want to tune it (DIGI_MTK_GIT, etc.).
Signed-off-by: Seth Bollinger <sethb@digi.com>
New kernels don't get CPU information from U-Boot ATAGS and
so the /proc/cpuinfo file does not have the Hardware/Revision
lines filled in.
This patch gets the CPU model from the device tree information
at /proc/device-tree/compatible.
For backwards compatibility, if the CPU model cannot be retrieved
from this file, we try to get it from /proc/cpuinfo.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Javier Viguera <javier.viguera@digi.com>
https://jira.digi.com/browse/DEL-797
wmiconfig is Atheros proprietary code so the recipe builds from source
if DIGI_INTERNAL_GIT is defined or uses a prebuilt binary otherwise.
https://jira.digi.com/browse/DEL-640
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
We are now using yocto kernel headers (3.x) in the toolchain so the
patches need to be applied regardless of the version of the running
kernel.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
If people are creating derivative machines in their layer, make
COMPATIBLE_MACHINE more flexible. Use SOC_FAMILY instead of specific
machine types. This allows users to more easily share these recipes.
https://jira.digi.com/browse/DEL-676
Signed-off-by: Seth Bollinger <sethb@digi.com>
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Similar commit was done in DEL.
Japanese law limits the maximum transmit power for Bluetooth to 3 mW.
The cert field in OTP will be set to 2 when units are manufactured
for Japan.
Updated the bluez init script to configure Bluetooth for class 2
operation if the cert field is set to 2, and to delete the class 1
configuration file since it would be illegal to use it in Japan.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
move ccardimx28js specific patch under PN-PV subdirectory. Otherwise it
fails to find the patch (this version of yocto restricts the FILESPATH
where to look for files)
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The build was failing for any IMX platform because it was trying to
build a bootstream u-boot.
The u-boot variables (UBOOT_*) used by yocto were incorrectly set,
so I reworked and simplified them to fix the bug and ease maintenance.
https://jira.digi.com/browse/DEL-562
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
QA Issue: Variable ALLOW_EMPTY is set as not being package specific
QA Issue: Variable RPROVIDES is set as not being package specific
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The external repositories have been cleaned up and commits have been
squashed so the sha1s need to be updated.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The public branches of those repositories have been cleaned up so
the external sha1s have changed.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The final product will be called "Digi Embedded for Yocto" or DEY for
short.
This commit renames all relevant files.
https://jira.digi.com/browse/DEL-474
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Otherwise a dev or sdk image which include the dev-pkgs image feature
will fail.
https://jira.digi.com/browse/DEL-488
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
https://jira.digi.com/browse/DEL-331
While on it, fix whitespace problems (mixed tabs + spaces) in the
bitbake recipe.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
- Merge SRCREVS
- Remove UBOOT_MAKE_TARGET_paltform as they already are in machine
configuration files.
- Merge DEPENDS_mxs_platform as they are equal.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
According to the Poky reference manual, SUMMARY inherits DESCRIPTION, so
it's better to have only a DESCRIPTION or both.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
INC_PR is used in include files to that the recipes that include them
can use it to increment the PR.
In this recipe what we need is to set the PR.
An example from the Yocto dev manual:
recipes-graphics/xorg-font/xorg-font-common.inc:INC_PR = "r2"
recipes-graphics/xorg-font/encodings_1.0.4.bb:PR = "${INC_PR}.1"
recipes-graphics/xorg-font/font-util_1.3.0.bb:PR = "${INC_PR}.0"
recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
All bbappend files will start as follows:
# Copyright (C) 2013 Digi International.
PRINC := "${@int(PRINC) + 1}"
PR_append = "+${DISTRO}"
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This recipe install an init script that allows to set some alsa audio
parameters without having to touch the default alsa states.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
kobs-ng is needed to be able to flash the bootloader from user space
in mxs platforms.
Fixes https://jira.digi.com/browse/DEL-340
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Just a cosmetic name change for the merged wired and wireless platforms.
This and related commits fixes https://jira.digi.com/browse/DEL-188.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The ConnectCard needs a bootstreamed (.sb) u-boot to boot from flash. This
is flashed using u-boot.
This changes compiles a bootstream u-boot image. The bootlets are compiled
separately and it's U-Boot's Makefile that calls elftosb to generate the
final bootstream.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This package contains firmware files for the MXS Digi family (Embedded and
boxed products).
Now it contains the bluetooth binary firmware files.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Now that all code is our own as we are not copying recipes into the
layer but overriden the ones in meta-fsl-arm, the prefix to comments
have no use.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Instead of having the whole recipe in meta-digi-arm, use the original
recipe in meta-fsl-arm and just add a bbappend file with some overrides.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
We use the 11.09.01 tarball which also includes binary firmware for other
hardware like the sdma and atheros, but we don't install the firmware
we don't use.
Also, we include newer VPU binary files on this commit, from the
11.09.01_201112 tarball which are the ones we use in DEL.
This is also done this way in meta-fsl-arm.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Gonzalo Ruiz
Gabriel Valcazar
Arturo Buzarra
Hector Palacios
Mike Engel
Alex Gonzalez
hbujanda
Jose Diaz de Grenu
Isaac Hermida
Francisco Gil
Javier Viguera
Tatiana Leon
David Escalona
Pedro Perez de Heredia
Jose Diaz de Grenu de Pedro
Paul Osborne
Seth Bollinger
Francis Sreeves