Follow the syntax:
_ov_<som|board>_<functionality>[_<hardware>].dts
where:
_ov_ identifies the file as an overlay.
som|board identifies whether the overlay applies to the SOM
or to the carrier board.
functionality identifies the function of the overlay.
hardware identifies the hardware to which the overlay
applies.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Wrapping unterminated lines doesn't work for scripts (even
if they contain the backslash).
Substitute with full non-wrapped if/elif sentences.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7252
In the ccimx6sbc, since each SOC has a separate set of device trees, we can use
the soc_family environment variable when generating the name of the final
device tree in the bootscript. However, for the ccimx6qpsbc, there is only one
set of device trees with the "imx6qp" prefix, even though there are SOC
variants such as the imx6dp. Running the bootscript on a ccimx6qpsbc with an
imx6dp SOC assembled will result in a failure, since it will look for a
non-existing device tree starting with a "imx6dp" prefix.
Stop using the soc_family variable and hardcode "imx6qp" instead.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the latest version of imx-mkimage, the original dtb file is being
removed at the end of the build.
Add a patch to preserve it and be able to run several builds during the
same compile run, like we do for imx-boot signing.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The CST package requires byacc to compile, and even though this dependency is
met when building images for the target, said dependency needs to be made
explicit when the package is built for the SDK in order to avoid build errors.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the previous solution we would need to generate
multiple overlays for each soc_type, so if we have a
new soc type (for example the solo), we would need
to generate 3 different overlays.
Signed-off-by: Francisco Gil Martinez <francisco.gilmartinez@digi.com>
This commit fixed the sdcard generation when encryption is enabled.
In the sdcard image always is included the signed image instead of the
encrypted.
https://jira.digi.com/browse/DEL-7200
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This version supports encryption for devices with Advanced High Assurance Boot
(AHAB) capabilities. This commit also updates and simplifies Digi custom
patches.
https://jira.digi.com/browse/DEL-7175
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add running 'mmc partconf 0 1 1 1' command to the uuu scripts after
writing the new U-Boot into the internal eMMC.
This is required for blank eMMCs on CC8MN and CC8X SOMs where the
'update' command has never been run to be able to boot from eMMC.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The encryption of the U-Boot environment uses the HWID as key
modifier. The HWID was being read using the fsl_otp driver sysfs
entries and over two words. The driver is now deprecated and also
the cc8x and cc8m platforms have different number of HWID words.
This patch modifies the function that reads the HWID words by
using new entries on the device tree 'digi,hwid_X' where X is the
index of the HWID word.
It also removes the need to select CONFIG_MD5 which is already
auto-selected on sandbox_defconfig by other config switches.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
(cherry picked from commit 8ced362766)
The encryption of the U-Boot environment uses the HWID as key
modifier. The HWID was being read using the fsl_otp driver sysfs
entries and over two words. The driver is now deprecated and also
the cc8x and cc8m platforms have different number of HWID words.
This patch modifies the function that reads the HWID words by
using new entries on the device tree 'digi,hwid_X' where X is the
index of the HWID word.
It also removes the need to select CONFIG_MD5 which is already
auto-selected on sandbox_defconfig by other config switches.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7185
The Cortex-M7 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Nano DVK board to avoid conflicts.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
Store mkimage log for every built target so it can be later used by the
signing script to create the correct CSF file for every target.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The mkimage.log file is required by the signing script to create the CSF file.
Since there is one mkimage log file per target, update the mkimage.log symlink
right before signing the imx-boot file to ensure creating the CSF with the
corresponding mkimage log for every target.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This commit updates to the NXP imx-5.4.24-2.1.0 BSP.
Including following changes
In M4 MCUX SDK 2.8.0, it added PMS demo for CM40 to support Partition
reboot feature besides rpmsg pingpong. So change the m40 default image
to imx8qm_m4_0_TCM_power_mode_switch_m40.bin
Build i.MX 8DXL flash_linux_m4 with V2X off
Use option V2X=NO to switch V2X off.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
imx-boot files for target flash_regression_linux_m4 fail the signature
process, so skip them while signing the rest of the targets.
https://jira.digi.com/browse/DEL-7158
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
When loading the wireless driver in test mode, the UTF firmware file
is loaded.
On pcie chips, the UTF file is expected to be named 'utf.bin'.
On sdio chips, the UTF file is expected to be named 'utf30.bin'.
Rename the pcie UTF file to match this requirement.
md5sum
----------------------------------------------------------
qca65X4_pcie: utf.bin -> 41cfb4e50613cd0eeb0fa99a005131bd
qca65X4_sdio: utf30.bin -> 4743dee015047752e433e69f4db89974
https://jira.digi.com/browse/DEL-7086
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Add Compliance Test Limits (CTL) information for FCC, CE and TELEC
certifications to the CC8X US Board Data File.
The rest of the file (calibration, target power levels, etc.) remains
intact.
Updated file:
- bdwlan30_US.bin (MD5SUM: 100a982b33b4a2cfeb34cdea794dc6d6)
https://jira.digi.com/browse/DEL-6995
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signed imx-boot files had the '-signed' appended at the end of the file.
Add it after the file prefix instead, so it is easier to replace using an
unsigned file for a signed one just by changing the file prefix.
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
The '-fmacro-prefix' option is a new GCC option introduced in gcc version 8.
To keep compatibility with previous GCC versions, remove this option from
the DEBUG_PREFIX_MAP list so nativesdk builds are able to compile this recipe.
Following is the compilation issue avoided by this patch:
| gcc: error: unrecognized command line option ‘-fmacro-prefix-map=<yocto-workspace>/tmp/work/x86_64-nativesdk-deysdk-linux/nativesdk-imx-mkimage/git-r0=/usr/src/debug/nativesdk-imx-mkimage/git-r0’
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This recipe is now built as native and nativesdk by means of the
BBCLASSEXTEND configuration.
Remove every remaining legacy native configuration since all will be covered
by the class extension.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This service is the same as the one provided by NXP, but with altered
dependencies. Start it before the kernel modules are loaded so the firmware is
ready by the time the mcp25xxfd module is loaded.
https://jira.digi.com/browse/DEL-7114
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The signing script is used for signing multiple artifacts, not just the
kernel, so rename it for a broader use.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Signing with AHAB mode only requires an additional prior step, so
reuse as much code as possible.
https://jira.digi.com/browse/DEL-7047
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
TRUSTFENCE_SIGN_MODE for ccimx8mn is "HAB", although the
BOOTLOADER_IMAGE_RECIPE is "imx-boot".
https://jira.digi.com/browse/DEL-7024
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
imx-mkimage is a host recipe to provide the mkimage_imx8 binaries, required
for the trustfence support with platform based on AHAB (ccimx8x). Since
these binaries are required to the sign process we need to export it in the
SDK to allow the standalone sign mode, and with that we can simplify the
mechanism to share these binaries with another recipes (u-boot, linux).
Also the do_deploy() from imx-mkimage recipe was removed to avoid overriding
the implementation from the native class and allow populating the mkimage
binaries.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Commit 3fbd38ca ("imx-boot: build ccimx8x images for B0 and C0 silicon
revisions") added support to build images for B0 and C0 revisions,
forgetting include this support on trustfence builds.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This recipe takes several binaries demo for the Cortex M7 CPU,
and are provided in the deploy directory.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This update is a cosmetic one and removes the RAM frequency from the SCFW
filenames. Reflect this change in the RAM_CONFIGS variable and in the uSD/UUU
installation scripts.
As a result, the imx-boot filenames will no longer have the RAM frequency
either.
https://jira.digi.com/browse/DEL-7096
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The scripts need to know the SOC's revision to be able to select the correct
imx-boot image. Modify the boot-artifacts bbclass so the renamed imx-boot files
are included in the installation .zip.
Also, bypass the SECO fw check in the uSD script so it can install future
versions that aren't recognized by U-Boot's SECO fw checking logic. The UUU
script doesn't require this bypass, since it doesn't use the Digi update
command to flash the bootloader.
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Modify the imx-seco recipe so it deploys the B0 and C0 versions of the SECO
firmware, Then, modify the imx-boot recipe so it builds every possible
combination of:
* RAM configuration
* imx-boot target (with and without M4 demos)
* Silicon revision
https://jira.digi.com/browse/DEL-7069
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
With the device tree overlays mechanism in place, the bootscript
doesn't need to set the fdt_file variable. Instead, it will use
the value it has (which can be changed by the user) and it will
simply update the 'overlays' variable with the device tree
overlays that apply basing on the hardware capabilities found
on the HWID, SOM version, and carrier board version.
This allows a user to override the default fdt_file to point
to his custom device tree, but still make use of the boot script
for hardware-detected overlays.
Without the need to set the base filename, the boot script is the
same for any carrier board of the ccimx8x SOM, so this commit
moves it to a common folder.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Each platform now has only one base device tree, meant for the i.MX8DX variants
of the ccimx8x boards. Apply the QXP overlay in the bootscript if the SOC is
identified as an i.MX8QXP.
Since we want to give this overlay a higher priority than the SOM overlays
(wifi and bluetooth), prepend it to the overlay list after appending the SOM
overlays.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Remove the old wb device trees from the ccimx8x-sbc-express and ccimx8x-sbc-pro
configuration files and add the ccimx8x wifi and bt overlays. Modify both
platforms' bootscripts to apply the overlays depending on board_id, hardware
capabilities or module variants.
https://jira.digi.com/browse/DEL-7100
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The function that parsed the output for a U-Boot variable value
was receiving a multi-line output, with blank lines that were
not being properly processed.
Simplify the parsing by using 'sed' command.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-951
The if condition expanded to nothing so the install command was
never called. Apart from that the install command was wrong and
missing the '-m' option for modifier.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Platform-based variable STORAGE_MEDIA, allows us to select the
correct configuration file without needing to replicate it per
platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Parse the hardware version from the HWID and load the overlay if and only if
the revision is "1". Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-7070
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Instead of having two separate device trees for the non-wireless and wireless
variants of the ccimx8mn, use the non-wireless .dtb as a base and apply the
overlays in the bootscript depending on the variant's capabilities.
Also, update the board's device tree list accordingly.
https://jira.digi.com/browse/DEL-2609
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This reverts commit 03d40edfd0.
The build of U-Boot without the flags field, incorporated changes
that made the Cortex M4 acquired certain resources (like GPIOs)
that were later not available for the Cortex A35 cores.
Revert this patch so that such changes only take place on images
that contain the M4 applications.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-7073
(cherry picked from commit 28ce9340f55a35199dacf1bcbf83dc016b6a2fc7)
Update to NXP's v1.4.0 porting kit, fix an issue with resource allocation
making some GPIOs unusable from the Cortex A35s and update the DCDs using NXP's
RPA v14.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update u-boot-fw-utils patches to apply on upstream version 2019.07.
https://jira.digi.com/browse/DEL-7013
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Add Trustfence support for signing imx-boot images:
- Install a different U-Boot signing script for images with U-Boot SPL.
- Store mkimage log for later use in the signing script
- make 'print_hab_log' and store its log for later use in the signing script
https://jira.digi.com/browse/DEL-7023
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Do not evaluate TRUSTFENCE_SIGN_MODE on conditions where the sign mode
is not relevant:
1) U-Boot binary file should be signed directly after building it when simple
U-Boot images are used, but it should not be signed when imx-boot bundled
images are used.
For those, the signing process is performed later over the whole imx-boot
bundled binary file on a different recipe.
We use BOOTLOADER_IMAGE_RECIPE variable to evaluate this distinction.
BOOTLOADER_IMAGE_RECIPE is set to "u-boot" by default and is set to "imx-boot"
on ccimx8x and ccimx8mn machine configuration files.
2) For signing imx-boot images we should treat differently those images that
include the RAM configuration in their name and those that don't, as we do
for the rest of the tasks in the same recipe. We can ignore the sign mode
method in this case.
https://jira.digi.com/browse/DEL-7023
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Some CC6Plus units fail to communicate with the Bluetooth chip at a certain
temperature range, as happened on some CC6UL units.
Apply the following customizations to the NVM file so the communication is
maintained regardless of the temperature.
- Disable DEEP_SLEEP
- Enable Internal Clock
These customizations were already performed on the NVM file for the CC6UL.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 400b31f652fb98bb1620e03f85a33c231bf6f244)
Generalize 'Disable Deep Sleep' and 'Enable Internal clock' customizations
so they can be applied on every platform by defining
BT_INTCLOCK_WORKAROUND to '1'.
Disable the customizations by default and enable them for ccimx6ul only.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit 78ef498178abe587d6e2cb4b1ed8ba5f8979fb4e)
We are currently applying customizations to the base NVM file on install.
There was an error that introduced the '"\' characters into the NVM file
instead of the intended hex data.
This commit fixes the implementation of this customization.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a204a7bfc54fc15aca0d87530c838fb427710a8e)
This commit adds a installation script that uses fastboot support to
update the target firmware.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
https://jira.digi.com/browse/DEL-6845
Digi Embedded Yocto 2.6-r3.1
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Mike Engel <mike.engel@digi.com>
There is no need to generate PV-PR revision of this file
since it's the same for any version.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The recipe needs to create a copy of the sign.sh script to be used by
other recipes, but the file is the same whether you use it for HAB or AHAB
images. This is determined through the use of an exported variable with
the mode. There is no need to have the script duplicated.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This binary is required for signing the U-Boot scripts generated
by the U-Boot recipe but it wasn't available because this recipe
was not installing it anywhere.
At the same time, remove the installation from imx-boot, to avoid a
conflict between the two (imx-mkimage is a dependency from imx-boot
anyway).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This commit adds some dependencies to include the imx-mkimage package
that is needed to use the mkimage_imx8 tool.
Signed-off-by: Mike Engel <Mike.Engel@digi.com>
* prefix TRUSTFENCE_ to variable SIGN_MODE for DEY
* prefix CONFIG_ to variable SIGN_MODE for script
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Commit 31d8ff94 ("meta-digi-arm: u-boot: Update recipes with new u-boot version")
updates the license checksum for the new u-boot_2019.04 recipe, however this
license file is different for the other u-boot versions.
This commit reverts this change and includes the updated checksum only for the
new u-boot_2019.04 recipe.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Wrapped lines must have a back-slash symbol so that U-Boot
doesn't interpret them as finished.
The missing symbol resulted in the script not being able to
determine the U-Boot image to program in some cases.
Reported-by: Leonid Makhnovskiy <leonid.makhnovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6953
This file does not longer exist. It has been replaced by bdwlan30_US.bin,
which is already included to the community driver option.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update US Board Data File to fix a wrong calibration of channel 7 (2442 MHz).
The rest of the file remains the same.
The new BDF is:
- bdwlan30_US.bin (f6ec3328309aaa3e187295446966ab27)
https://jira.digi.com/browse/DEL-6922
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- bdwlan30_US.bin (d5221377de1dde9ff442740e56fea647)
This file was generated by calibrating several CC8MN DVKs and
merging their resulting BDF files into a Golden file.
Reference calibration file is:
- bdwlan30_US.bin (a5635e39aaaa220094e0d07f7a4f4567)
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The new driver uses the same files for both platforms (6564,
6574). The specific platform binaries have been removed.
Now the modifications of the nvm_tlv_3.2 to disable the IBS
is done by the recipe.
The disable of the deep sleep and the enable of the internal
clock is done in the recipe only for the CC6UL.
We have used the files from the following repo:
qca6574au-le-2-2-2_qca_oem -> 4d29c6886f2Commit label r00005.1
- CS2.2 0.0.005.1
md5sum
------------------------------------------------------------
nvm_tlv_3.2.bin -> a97cdfe80e8109cf3574f74cd3c73fc7
rampatch_tlv_3.2.tlv -> 72d28614afd0abe5846c1758099282e3
https://jira.digi.com/browse/DEL-6766
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update the wireless driver to a newer version that supports both
chips (qca6574 and qca6564).
We keep the same bdwlan30_US.bin files as the previous version
of the driver (or fakeboard_US for the qca6474).
Rename directories to qca65X4_driver_interface.
We have used the files from the following repo:
qca6574au-le-2-2-2_qca_oem -> 4d29c6886f2Commit label r00005.1
- CS2.2 0.0.005.1
md5sum
----------------------------------------------------------
qca65X4_pcie: otp30.bin -> 9d1cf03473904bd8b97fa30bc92b4a16
qwlan30.bin -> 794f7a6f12ef3e6f8db6257b3a6f896f
utf30.bin -> 41cfb4e50613cd0eeb0fa99a005131bd
qca65X4_sdio: otp30.bin -> e018e7b629b055dc4616c7e88c615b41
qwlan30.bin -> fe37bc043132ecf21e504eb33f46b846
utf30.bin -> 4743dee015047752e433e69f4db89974
https://jira.digi.com/browse/DEL-6766
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Although the recipe was updated with the modifications in meta-fsl-bsp-release,
the revision was still pointing to the sumo-4.14.98-2.2.0 version of
imx-mkimage, which is incompatible with our recently updated patch.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to NXP's v1.3.0 porting kit and add power optimizations for suspend
mode.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update to v2.5.4 and add new recipe imx-seco-libs. For the time being, use the
B0 firmware for all i.MX8QXP platforms and leave C0 support in a comment.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update SRCREV and SRCBRANCH, change the names of the m4 demos that are
installed into imx-boot, change the name of the SECO firmware (ahab container)
and update our patch so it applies over the newest revision of imx-mkimage.
For the time being, use the B0 SECO firmware for all i.MX8QXP platforms and add
the changes needed for C0 support in comments.
https://jira.digi.com/browse/DEL-6932
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The LPDDR4 retention code is executed as part of the suspend/resume process.
When resuming, this code writes to a register that doesn't exist on the
i.MX8MN, causing the system to freeze before control is returned to Linux.
Add a patch that introduces a compile-time check for the SoC type to avoid
performing the write operation on the i.MX8MN.
https://jira.digi.com/browse/DEL-6914
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The Cortex-M7 uses the UART4 as debug console, and it is
shared with the Cortex-A53. This commit disables it for the
ConnectCore 8M Nano DVK board to avoid conflicts.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
For the i.MX8M processors, the do_deploy support is provided by
the upstream recipe firmware-imx-8m.
https://jira.digi.com/browse/DEL-6911
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
(cherry picked from commit a332ff445f)
Update file:
- fakeboar_US.bin (f74a835871d9c12f116312ff54927b39)
This file was generated by calibrating 10 CC8X SOMs (version 0x4) and merging
their resulting BDF files into a Golden file. Target powers table is also
updated to improve performance on 2.4GHz band.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6852
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This imx-seco recipe manages now the NXP IMX SECO firmware, it was removed
from the firmware-imx recipe.
https://jira.digi.com/browse/DEL-6823
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Digi Embedded Yocto 2.6-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Rename board data file loaded on qca6574 wireless chips to 'fakeboar_US.bin'.
A symlink named 'fakeboar.bin' will be created by 'qualcomm.sh' selecting
either this file or the WorlWide variant: 'fakeboar_World.bin'.
- fakeboard_US.bin (e1db4a300b58776f8abd8588beadc09e)
https://jira.digi.com/browse/DEL-6773
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (e1db4a300b58776f8abd8588beadc09e)
This file was generated by calibrating several CC8X SOMs and SBCs and
merging their resulting BDF files into a Golden file.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (3e558869e3943da08899abd881455bc6)
This file was generated by calibrating several CC8X SOMs and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10007.1 on
qca6574au-le-2-2-1_qca_oem repo.
https://jira.digi.com/browse/DEL-6736
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Latest release r10007.1 updates the following files from qca6574au-le-2-2-1_qca_oem
repo at meta_build/firmware/pcie/:
- qwlan30.bin -> qwlan30.bin (60ac4486fba393294b590f86117f5539)
- utf30.bin -> utf.bin (c15794509d8a8435d4244fea699d99b3)
and the following files from meta_build/firmware/sdio/:
- qwlan30.bin -> qwlan30.bin (4421b30ca259ab73bbfa79df807e0b47)
- utf30.bin -> utf30.bin (b2651762aa1d620349593905efab326b)
Update Bluetooth firmware from qca6574au-le-2-2-1_qca_oem repo at
cnss_proc_1/btfm_proc/bt/wcss/bsp/rom/build/SCAQBAF/Test_Files/Linux/
- rampatch_tlv_3.2.tlv -> rampatch_tlv_3.2.tlv (72d28614afd0abe5846c1758099282e3)
- nvm_tlv_3.2.bin -> nvm_tlv_3.2.bin (3de46ea023570b86cabb9502b92a1fed)
Note: nvm_tlv_3.2.bin based on original md5sum
a97cdfe80e8109cf3574f74cd3c73fc7 but changed byte at
offset 0x36 from 0x82 to 0x02 (IBS).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6725
Remove our .bbappend, which was wrongly making this recipe compatible with the
imx8. Directly port NXP's recipe (v5.4.39), which is newer than the one in
meta-freescale (v5.4.38).
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Change the license type from "MIT" to "Proprietary". This change was taken
from the imx-sc-firmware recipe.
https://jira.digi.com/browse/DEL-6722
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, users that are behind corporate firewalls might not be able to
obtain the package sources.
https://jira.digi.com/browse/DEL-6663
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The 'soc_type' variable was already set by fastboot to "imx8qxp"
so the U-Boot board code that was setting this to just "8qxp" has
been changed to set it to "imx8qxp".
Update the scripts accordingly.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DUB-901
This commit fixes two issues:
- Comparison clause uses only one equal sign
- Fix soc_type for Dual variants because the supported soc types
for the imx8 processor are: 8qm, 8qxp, and 8dx
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These images were broken in many ways, including ethernet not working and Linux
not booting. For now, revert back to the build command that was used in
DEY-2.6-r1.
https://jira.digi.com/browse/DEL-6677
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
After the recent changes to generate the bootable artifacts, these are
now formed using the ${MACHINE} variable rather than the string in
${UBOOT_CONFIG} array, so the underscores must be changed with dashes.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The existing loops were iterating through all RAM_CONFIGS, but
they must only iterate over those that match the RAM size on the
platform's UBOOT_CONFIG.
This commit adds a Python class 'boot-artifacts' to get the list of matching
combinations of RAM_CONFIGS and UBOOT_CONFIG so that the iteration
is easier to do than nesting loops inside one another.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
The recipe was creating a variable with the value of another one from
the main recipe, just to refer to the bootable artifact prefix.
We can now use instead the new UBOOT_PREFIX variable.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Similar to the way the u-boot recipe does, create a symlink to the default
bootable artifact.
Since they are overwritten on every loop, this requires that the default
RAM configuration is set the last on the list of RAM_CONFIGS (same
convention than the one used on UBOOT_CONFIGS).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the rework to support variants, the machine name (actually the
UBOOT_CONFIG) was removed from the filename. Re-add it using
${MACHINE_NAME} which is more appropriate than the ${UBOOT_CONFIG} which
contains the RAM size (now present in ${ramc}).
While on it, remove one of the two symlinks on DEPLOYDIR. Only one makes
sense.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
Now the U-Boot binaries contain the RAM frequency and bus width, not just
only the RAM size.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
There are several U-Boot binaries, depending on RAM size, at the moment:
- u-boot.bin-ccimx8x_sbc_pro512MB
- u-boot.bin-ccimx8x_sbc_pro1GB
- u-boot.bin-ccimx8x_sbc_pro2GB
and several SCFW files, depending on frequency, size, bus width, at the
moment:
- scfw_tcm.bin-1.2GHz_512B_16bit
- scfw_tcm.bin-1.2GHz_1GB_16bit
- scfw_tcm.bin-1.2GHz_1GB_32bit
- scfw_tcm.bin-1.2GHz_2GB_32bit
From these, we need to combine those that match the RAM size, to produce
bootable images for the different variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
With the arrival of DualX variants, the device tree files have been renamed
to contain the SOC type (8qxp, or 8dx). This is determined by a new U-Boot
variable 'soc_type'.
Default to "8qxp" if the variable is not defined (old U-Boots).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6641
This recipe was updated in NXP's 4.14.98-2.0.1 patch release.
https://jira.digi.com/browse/DEL-6618
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The 'do_install()' call was doing a 'cd' command to later do symlinks
more straight forward.
This 'cd' however may affect further 'do_install' appends, that expect to
be working on the ${WORKDIR}.
Remove the 'cd' command and instead supply the correct paths to the 'ln'
commands.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 54bd1e47ad024515b737aea106dc4fca374c0fb8)
The new HWID fields make U-Boot create new variable 'module_ram'.
If it exists use it to select the U-Boot file to use during
firmware update. If not, fall back to old method of using the
variant code and the hard-coded table of variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6598
The new HWID fields make U-Boot create new variable 'module_ram'.
If it exists calculate new HWID fields to check if the SOM has
Wi-Fi, Bluetooth, etc. in order to select the device tree file.
If not, fall back to old method of using the variant code and
the hard-coded table of variants.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6598
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
When using v1.5, we used a .bbappend to change the revision of the v1.5 recipe
in meta-freescale. Since we're upgrading to a version that isn't supported in
the other layers yet, remove the .bbappend and add the entire v2.0 recipe.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is the version used in meta-fsl-bsp-release branch sumo-4.14.98-2.0.0_ga.
https://jira.digi.com/browse/DEL-6603
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.6-r1.3
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
These dependencies went missing when we deleted our first .bb file and replaced
it with a .bbappend. Without these dependencies, the build can sometimes fail.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This variant is exactly the same as variant 0x02, but with a new revision
of the i.MX6UL silicon.
https://jira.digi.com/browse/DEL-6555
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Update following firmware binaries to tag r10005.1 from
qca6574au-le-2-2-1_qca_oem repo at meta_build/firmware/sdio/
in order to support fast roaming (802.11r) for the qca6564
wireless chip:
e018e7b629b055dc4616c7e88c615b41 otp30.bin
8b638fdaf21f089940d98db518323767 qwlan30.bin
d6ece5037e595000770fbbb6015c0461 utf30.bin
https://jira.digi.com/browse/DEL-6496
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Update u-boot-fw-utils patches to apply on current upstream version. Remove
recipe for version 2017.09 since both U-Boot v2017.03 and v2018.03 work fine
with the newer version.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Most of the support has been added to the meta-freescale layer, so
substitute our recipe for a .bbappend and redefine the tasks to build
U-Boot images for our two variants (1GB and 2GB).
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Every task in this recipe is already supported in the same way in the
meta-freescale layer, so just keep the .bbappend file to select SRCBRANCH and
SRCREV.
The DDR patch can be removed since that source code is now included into the
SCFW project.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This adds support for U-Boot v2018.03 for CC8X platforms only.
Create 'digi-u-boot.inc' with the common definitions for both v2017.03
and v2018.03.
https://jira.digi.com/browse/DUB-881
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
Update file:
- fakeboar.bin (f9f8dc905be5732525e0c9e8db7822f3)
This file was generated by calibrating several CC8X SBC Pro boards and merging
their resulting BDF files.
Reference calibration file is:
- bdwlan30.bin (8a558fa38dacee7038f04c1b10ec69a5)
located at 'cnss_proc/wlan/fw/target/pcie_dst/qc6174/' from tag r10005.1 on
qca6574au-le-2-2-1_qca_oem repo.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
This version supports OpenSSL v1.1.0 by default, which is used in DEY 2.6.
Trying to build older versions of the package will result in failures, so
remove support for said versions entirely.
Our patches apply cleanly except for the hab4_pki_tree.sh automation patch,
which needs a small tweak so it can get applied over the latest version of the
script.
https://jira.digi.com/browse/DEL-6476
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Fix write operation by moving the re-lock of the mmc partition
after performing the system synchronization, if not the mmc
driver throws read-only errors. Also, improved the code
to avoid compilation warnings because the return values were
not managed in write operations.
https://jira.digi.com/browse/DEL-6449
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Bitbake was using the imx-atf recipe inside of meta-freescale instead of ours.
Said recipe was compiling a different tag, causing our kernel to stop loading
when using our generated imx-boot images.
Remove our .bb file and add a .bbappend that changes the source code revision
to the tag compatible with the rest of the imx-boot files.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Device tree file names won't have the kernel image type like a
prefix anymore, since thud uses the original file names.
https://jira.digi.com/browse/DEL-6443
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This is a new intermediate file that will be reused in every iteration if it's
not removed, causing all imx-boot images to have the same U-Boot binary.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Up to now, the ConnectCore 8X was using the Bluetooth firmware
files from model QCA6564 r110059.1.
This commit adds the firmware files from repo 'qca6574au-le-2-2-1_qca_oem'
at tag r10005.1:
nvm_tlv_3.2.bin: 3de46ea023570b86cabb9502b92a1fed
based on MD5SUM a97cdfe80e8109cf3574f74cd3c73fc7 but changed
byte 0x36 (decimal 54) to 0x02 (IBS)
rampatch_tlv_3.2.tlv: e8cdb0260615e02bd21c3b3fcaf832eb
The recipe has changed to use the variable QCA_MODEL and each firmware
has moved to a folder of its own.
While on it, remove old Bluetooth firmware files 3.0 which were
not used.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-6218
Digi Embedded Yocto 2.4-r2.2
Manually changed recipes to use the master branches instead of the fixed SHA1
from the last release.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Without these symlinks, U-Boot images will be left out of the installer .zip
file. Unlike the v2015.04 recipe, the default symlinks aren't removed, because
they're needed in the imx-boot recipe for the ccimx8x.
https://jira.digi.com/browse/DEL-6333
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is only a cosmetic change to break away from NXP's versioning and use our
own from now on.
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This reflects the fact that the firmware is customized for Digi platforms. The
versioning still follows the one used by NXP in their recipe.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These patches were originally introduced in the recipe because the DCD files
were needed by mkimage to create the final imx-boot binaries. Now they are
in the SCFW source code instead.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The "sha384sum" tool included in the coreutils package is needed by mkimage
when creating the imx-boot image.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Otherwise, the default imx-boot images will include the Cortex M4 demo.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
These adaptations include changing the mkimage targets and removing any
handling of the DCD files, since they are now included in the SCFW. Note that
these changes break support for step A0 of the silicon.
The md5sum of the imx-sc-firmware tarball will be updated once the step B0 CPUs
are ready.
https://jira.digi.com/browse/DEL-6158
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When the imx-boot recipe is added in EXTRA_IMAGEDEPENDS the
license file is being referenced in image postcommand
write_deploy_manifest, but the licenses of the dependant
packages are missing. This leads to the license files of the
recipes to be missing when write_deploy_manifest runs,
causing build errors to appear.
https://jira.digi.com/browse/DEL-6251
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Generalize DCD patch to be agnostic of the platform and modify the imx-boot
recipe to depend only on the memory configuration instead of the platform name.
https://jira.digi.com/browse/DEL-6205
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Initialize Bluetooth chip in HCI_H4 mode and provide a firmware binary
with the IBS and DEEP_SLEEP mode disabled by default. Also this firmware
enables an internal clock required to maintain the system on low power modes.
https://jira.digi.com/browse/DEL-3711
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This way, customers are less likely to flash the plain u-boot by accident
instead of imx-boot. Also, have the imx-boot recipe look for the u-boot files
in the imx-boot-tools directory.
https://jira.digi.com/browse/DEL-6185
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Digi Embedded Yocto 2.4-r2.4-beta
Manually changed recipes to use the master branches instead of the
fixed SHA1 from the last release.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
We have seen errors when verifying the rootfs update on 2 GiB variants. Forcing
otf-update prevents these errors from happening.
https://jira.digi.com/browse/DUB-855
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, make the script recognize the different SOM variants.
https://jira.digi.com/browse/DEL-6175
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit a2a8491140)
When grepping for the mtd index "1" the script was also returning
partitions 10, 11, and so on.
Reported-by: Leonid Makhnovskiy <leonid.maknovskiy@digi.com>
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Since this binary (u-boot-atf.bin) wasn't being deleted, the mkimage makefile
was using the one from the previous iteration, causing the 1GB imx-boot to
contain the 2GB U-Boot.
https://jira.digi.com/browse/DEL-6094
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This firmware was built using commit 9a6f1cbba2f49d2284c4211688d3cdd12fc67eca
in our cc8x-scfw repo.
https://jira.digi.com/browse/CC8X-149
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
Also, move all of the recipe's patches from the .bbappend file to the .bb file,
because the .bb file's modifications depend greatly on said patches.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This package is the combination of U-Boot and the other i.MX firmware binaries.
In our case, these binaries are: the SCFW, the ATF and the DCD.
The recipe has been ported from the meta-fsl-bsp-release repo, with a couple of
important changes:
* Support for our platform (based on the mx8qxpa0, which uses A0-specific
parameters for mkimage and appends the DCD explicitly)
* Support for multiple UBOOT_CONFIG values (NXP only uses one UBOOT_CONFIG
string per platform; so the compile, install and deploy functions had to
be tweaked to build both 1GB and 2GB variants for our platform).
Our DCD patch used in imx-mkimage is also used, since both packages share the
same repo and imx-boot is the one responsible for generating the final,
bootable image.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
In order for Yocto to append all the necessary firmware binaries to the U-Boot
image, this recipe needs to be up to date.
Also, remove the older hardcoded SRCREV in our .bbappend file. The file that
gets patched hasn't been modified since beta1, so our patch apllies cleanly to
beta2.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This adds and AHAB container to the QXP binaries, although according to the
makefiles in the mkimage package, it isn't used in the A0 revision of the CPU.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This is needed to match U-Boot's SC API changes. Also, for now, use NXP's
A0 version of the firmware without our customizations until we have access to
the new SCFW SDK.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
The ATF binary's source code needs to be updated for the new U-Boot to work
properly.
https://jira.digi.com/browse/DEL-6085
Signed-off-by: Gabriel Valcazar <gabriel.valcazar@digi.com>
This commit updates firmware binaries to tag r10004.2 from
https://stash.digi.com/scm/linux/qca6574au-le-2-2-1_qca_oem.git
and modifies the recipe to use the QCA6574 proprietary driver by default.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
The 5.4.37 recipe already exists on meta-freescale and the
bbappend was wrongly resetting the COMPATIBLE_MACHINE to only
the ccimx8x.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
U-Boot's 'dboot' command now supports uncompressing Image.gz.
This will be the default kernel image type for the CC8X.
This also changes the names of the device tree artifacts, that must be
updated on the boot script. While on it, add support for all the SOM
variants (wireless and non-wireless).
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This was done using Excel aid sheet:
MX8QXP_LPDDR4_register_programming_aid_ValidationBoard_1.2GHz_v7_DBI_enabled.xlsx
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This recipe builds the Device Configuration Data (DCD) that
configures DRAM controller before the bootloader.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
The firmware-qualcomm recipe now provides the Bluetooh and WiFi firmware
for QCA6564 (CC6UL, CC6PLUS) and QCA6574 (CC8X).
The Bluetooth firmware is the same for both chip models.
Regarding the Wifi firmware:
- If using the QCA6564, the proprietary firmware is used.
- If using the QCA6574, the recipe allows to select between the proprietary
or the community driver (via QUALCOMM_WIFI_DRIVER), and will install the
associated firmware. For the community driver, the firmware files have
been copied from linux-firmware repo at SHA1 7518922bd5b9, except for
the file 'board.bin' which needs to be substituted with the proprietary
one by Qualcomm. Default, is to use the community driver.
The do_install() has been improved for re-using the variables with the list
of files.
The package has been renamed basing on the QCA_MODEL variable which can
be set per platform.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
This adds support for U-Boot v2017.03 for all platforms (including CC8X).
For legacy v2015.04:
- Renames u-boot.inc as a versioned file only for v2015.04.
- Moves boot/install scripts from versioned folder into non-versioned
folder (since the scripts remain the same between versions).
For new v2017.03:
- Re-uses poky's u-boot.inc in rocko for v2017.03
- DEY recipe re-writes the do_compile for special U-Boot configuration
required for TrustFence.
- DEY recipe appends the do_deploy, for U-Boot scripts and deploy of
special TrustFence artifacts.
- Adds u-boot-dtb.xxx to UBOOT_CONFIG, required for new U-Boots.
- Adds CC8X scripts.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5936
Under certain circumstances I was able to create a microSD card with
the FAT file system but corrupt partition table like this one:
Device Boot Start End Sectors Size Id Type
/dev/sdf1p1 778135908 1919645538 1141509631 544,3G 72 unknown
/dev/sdf1p2 168689522 2104717761 1936028240 923,2G 65 Novell Netware 386
/dev/sdf1p3 1869881465 3805909656 1936028192 923,2G 79 unknown
/dev/sdf1p4 2885681152 2885736650 55499 27,1M d unknown
Specifying the partition index made the install script to fail, but
not specifying it makes it work, although it also falls back to use
the first partition in the table.
Signed-off-by: Gonzalo Ruiz <Gonzalo.Ruiz@digi.com>
In the old u-boot-fw-utils 2016.x the function 'fw_env_close' wrote
the environment to the media. That is no longer the case, now that
function only frees the memory used, and 'fw_env_flush' is used
to write the environment.
This was causing that userspace application using this library were not
able to write changes to the environment.
https://jira.digi.com/browse/DEL-5644
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Generate and include the host tools in the SDK when Trustfence is enabled.
This makes it easier to use the standalone signing and encrypting scripts.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
This allows us to save around 4MiB of space in the rootfs image.
(see commit in poky/meta 71ca295786e35b7be84bfd4bc04e0c3ec0f97cd8)
https://jira.digi.com/browse/DEL-5613
Signed-off-by: Isaac Hermida <isaac.hermida@digi.com>
Support for dynamic location of U-Boot environment was added in
commit 2b5017956b. This forward ports
the patch to Yocto 2.4.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5574
As a side effect, remove U-Boot entry point variable and LOADADDR
extra parameter from the kernel recipe.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5554
Some packages are not updated in meta-freescale/rocko, so we do
need to include some of these.
The patches for gstreamer in the original commit are skipped, as
poky/rocko uses a newer version.
This partially reverts commits:
* 52a10ff88d.
* b06c81b277https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
All these recipes and patches are now available and maintained in the
meta-freescale layer.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
Pending to update the patch for dynamic environment location in NAND.
https://jira.digi.com/browse/DEL-5518
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
When parsing the recipe, a warning is shown because the tarball is only found
in the downloads folder. However this is expected as it cannot be distributed.
As a workaround, add the tarball to the SRC_URI variable only when Trustfence
is active. That way the warning is not shown in all other cases.
This was incorrectly removed in commit 14fc51147f.
Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@digi.com>
U-Boot has been able to boot kernel zImage for a long time so make this
the default kernel image.
For the CC6 we still want to use uImage for compatibility reasons.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-5237
This commit modifies different recipes to support the new platform
ccimx6qpsbc and adapt it to maintain the support to ccimx6sbc.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
This commit includes ccimx6qpsbc platform in the recipe and adds
U-Boot scripts for deploying and booting the system.
https://jira.digi.com/browse/DEL-5082
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
CC6 PS_ASIC_class_1.pst MD5SUM be8766069eed652449682d9006dd6ecd
https://jira.digi.com/browse/DEL-5057
Signed-off-by: Francisco Gil <francisco.gilmartinez@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
The new fw-4.bin (v3.4.0.236) with md5sum e2fc33daba2c35fe2c4f62492a44f8b6
was used to pass RED (Radio Equipment Directive) certification on the CC6
module.
https://jira.digi.com/browse/DEL-4512
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
A mechanism was introduced in U-Boot to dynamically locate the environment
copies within a NAND partition, skipping bad blocks and making full use of
the partition blocks.
To trigger this mechanism in Linux tools (fw_printenv/fw_setenv) the
configuration file /etc/fw_env.config must have both copies entries
pointing to the same offset.
This commit substitutes the hardcoded configuration file for CC6UL with a
stub and generates one on an RPM post-script basing on:
- Supplied DEY variables (with default values per platform):
- UBOOT_ENV_OFFSET: starting offset of the environment within the
partition.
- UBOOT_ENV_SIZE: size of each copy of the environment.
- UBOOT_ENV_RANGE: size in the partition that the environment copies may
occupy, starting from UBOOT_ENV_OFFSET. If undefined, the whole
partition is used.
- Calculated values:
- NAND Erase block size
- Number of blocks available for the environment copies
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4256
This is a Consumer dual-core 1GHz, 4GB eMMC, 1GB DDR3, 0/+70C variant
without bluetooth, no wireless, no kinetis.
https://jira.digi.com/browse/DEL-4280
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
Tweaked to maintain some recipes' revisions to AUTOREV instead of the
fixed SHA1s from the tag.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results including the 2 dB power reduction
from DVT.
md5sums:
a5635e39aaaa220094e0d07f7a4f4567 bdwlan30_US.bin
cabebad84a6afc1c2a7d795d31dda480 bdwlan30_World.bin
https://jira.digi.com/browse/CC6UL-740
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Variant 0x04 has wireless and must select the '-wb' device tree.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-4100
Add support to build U-Boot for variants with 1GB DDR3.
Add support in U-Boot install firmware script to select the
U-Boot artifact to use basing on variant.
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
https://jira.digi.com/browse/DEL-3970
The firmware configuration and the driver configuration are part of the
driver repository. Stop duplicating the content in meta-digi so they
are updated with the driver itself.
https://jira.digi.com/browse/DEL-4021
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
These new US and world board data files contain new settings updated
with the latest certification results.
md5sums:
386475740ad0e41f4387eebdf2931c16 bdwlan30_US.bin
d349985b51353f430183f1bf9f6d90d1 bdwlan30_World.bin
https://jira.digi.com/browse/DEL-3950
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This will allow to get the package from a premirror in case it is not
already downloaded in the DL_DIR.
https://jira.digi.com/browse/DEL-3051
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
This is to avoid the following QA error:
ERROR: fbtest-1.0-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: '/usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/packages-split/fbtest/usr/bin/fbtest' [ldflags]
ERROR: fbtest-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: fbtest-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /usr/local/ssd/dey-2.2/workspace/ccimx6ulstarter/tmp/work/cortexa7hf-neon-dey-linux-gnueabi/fbtest/1.0-r0/temp/log.do_package_qa.6755
ERROR: Task (/usr/local/ssd/dey-2.2/sources/meta-digi/meta-digi-dey/recipes-digi/fbtest/fbtest.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
- Instead of using a different boot script when booting from linux
and from recovery, merge them into one script that checks the
boot source.
https://jira.digi.com/browse/DEL-3836
Signed-off-by: David Escalona <david.escalona@digi.com>
Patches added in 'meta-swupdate' (backported from U-Boot) broke our
layer. We also had those patches, so remove them and make sure the
rest or our patches are applied after the ones from 'meta-swupdate'
by using an anonymous python function instead of appending to the
SRC_URI variable.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Hector Palacios
Gabriel Valcazar
Gonzalo Ruiz
Mike Engel
Francisco Gil Martinez
Arturo Buzarra
Alex Gonzalez
hbujanda
Jose Diaz de Grenu
Isaac Hermida
Javier Viguera
Tatiana Leon
David Escalona